2,036 views

Tips for Removing and Installing a 2016 Honda accord 9 (2.0L) Car Radio with Bluetooth GPS Function

What’s in your mind when referring to the installation of a car radio? Perhaps you think it hard and can only be finished by a professional with much expertise and experience. However, as I as I am concerned, it is not difficult for you to finish the car radio installation if you have some related experience and a correct installation guide. Here I would like to share a 2016 Honda accord 9 (2.0L) car radio installation guide from Seicane to you. If you have the same or similar dashboard, you can refer to it carefully.

2016 Honda accord 9 (2.0L) Car Radio after installation

2016 Honda accord 9 (2.0L) Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2016 Honda accord 9 (2.0L) car radio installation guide

1. Use a plastic removal tool to remove the side panels.

Use a plastic removal tool to remove the side panels

Use a plastic removal tool to remove the side panels

2. Remove two screws that fix the pocket.

Remove two screws that fix the pocket

Remove two screws that fix the pocket

3. Remove the pocket.

Remove the pocket

Remove the pocket

4. Use a plastic removal tool to release the panel to the left of the radio.

Use a plastic removal tool to release the panel to the left of the radio

Use a plastic removal tool to release the panel to the left of the radio

5. Use the plastic removal tool to pry the top tray and remove it.

Use the plastic removal tool to pry the top tray and remove it

Use the plastic removal tool to pry the top tray and remove it

6. There are two top screws and two bottom screws that are holding the radio, remove them with a screwdriver.

There are two top screws and two bottom screws that are holding the radio, remove them with a screwdriver

There are two top screws and two bottom screws that are holding the radio, remove them with a screwdriver

6-1

6-1

7. Pull out the original radio and disconnect connectors at the back of it.

Pull out the original radio and disconnect connectors at the back of it

Pull out the original radio and disconnect connectors at the back of it

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

Wish you can get some help from the above installation guide. If you have any doubts, please feel free to consult your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to finish the whole removal and installation by yourself, you can straightly arrange a professional technician to help you install the new car radio directly. Besides, if you haven’t got an ideal car radio yet, I’d like to share a 2016 Honda accord 9 (2.0L) car radio from Seicane with you, which can be taken as your reference.

https://www.seicane.com/hd-touch-screen-android-car-stereo-for-2016-honda-accord-9-2-0l-gps-navigation-with-radio-bluetooth-music-usb-dvr-3g-wifi-mirror-link-steering-wheel-control-1080p-video-canbus-s0403

Upgraded to the most stable Android 6.0 operation system and loaded with a powerful CPU processor, this car radio can be regarded as one of your best choices to replace your factory radio in 2016 Honda accord 9 (2.0L).

The worldwide real-time GPS navigation system is especially built-in for you to locate where you are and find the right way to reach any locations you would like to go to at anytime and anywhere. Besides, thanks to this unit’s dual zone function, you are able to listen to your favorite music while navigating.

Besides, this car radio is equipped with a large HD 10.1 inch multi-touch screen with 1024 *600 pixels. So when you watch videos TV program or movies, you can enjoy the best display effect and have a good view of the road ahead.

Wish you enjoy your in-car life accompanied by this all-in-one car radio. Good luck!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>