It will be very pleasant and relaxing if you drive your own car to take a trip with your families. If you want to keep yourself and your families entertained all the way, it is a great idea for you to replace your factory radio with a multifunctional car radio. And a correct installation guide can help you with your car radio installation. Here I’d like to share a step-by-step 2011 2012 KIA K2 RIO GPS Bluetooth Car Radio installation guide from Seicane with you.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2011 2012 KIA K2 RIO car radio installation guide
1. The original car radio.
2. Use a plastic removal tool to release the top panel.
3. Pry the trim panel of the radio with a plastic knife and remove it.
4. Unscrew the screws that are holding the radio on the dashboard.
5. Take out the radio gently.
6. Unplug the connectors and cables at the back of the radio.
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original radio’s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
That’s all about the whole installation process for a 2011 2012 KIA K2 RIO GPS Bluetooth Car Radio. Wish it can be helpful for you. If you encounter any problems you cannot deal with independently, you can seek help from your dealer, someone experienced or a professional. But if you haven’t got a suitable car radio yet, I’d like to recommend a wonderful 2011 2012 KIA K2 RIO GPS Bluetooth Car Radio from Seicane to you. You can check out the following link for more details.
This remarkable 2011 2012 KIA K2 RIO GPS Bluetooth Car Radiofrom Seicane, based on the advanced Android 5.0.1 operation system and with a powerful R16 1.8 GHz Quad-core CPU processor, can greatly facilitate your easy operation. With the assistance of the high-end 3D GPS navigation system, you are able to have the best route option to get to wherever you want to go without mistake and being late. Besides, the Bluetooth module is built in for you to freely get access to hands-free calls as well as streaming music to keep you safe and pleasant all the way through simple connection between your enabled mobile phone and this unit. Just enjoy your trip with your families accompanied by this great car radio.