If you drive your car for a self-driving travel with your families or friends, you must want to listen to some music or watch some movies to relax all of you on the way. Under this circumstance, you can think about removing your factory radio and installing a new aftermarket car radio. Today I would like to share a 2015 Toyota CAMRY car radio installation guide from Seicane with you . If you have the same or similar dashboard, you can take it as a reference.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2015 Toyota CAMRY car radio installation guide
1. Use your hands to grab the top cover and pop it out.
2. Remove the air vent and then unplug the connector at the back of it.
3. Remove the lower dashboard trim panels.
4. Grab the shift lever knob, and rotate it counterclockwise.
5. Remove the plastic part around the shift lever.
6. Remove screws that fix the AC control so as to remove the AC control.
7. Unscrew screws that are holding the radio on the dashboard.
8. Take out the original car radio.
9. Disconnect the connectors and cables at the back of the radio.
10. Check all the accessories for the new Seicane car radio.
11. Connect the harnesses to the back of the new Seicane car radio.
12. Connect the Seicane car radio to your original radio’s plugs.
13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
14. Put the new Seicane car radio into the dash.
15. Put everything into their original place. All the installation is done.
Now do you know how to remove the factory radio and install the new car radio for a 2015 Toyota CAMRY car radio? If not, please don’t hesitate to consult your dealer, communicate with someone experienced or seek help from a professional. Or you can directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio.
If you haven’t got an ideal car radio yet, here I would like to share an amazing 2015 Toyota CAMRY car radio from Seicane with you. For more information, please click:
This modern car radio runs with the stable Android 7.1 operation system and a powerful CPU processor and a quad-core CPU processor. With this car radio installed in your car, you can get access to features, mainly including high-end 3D GPS navigation system, Bluetooth hands-free calls, Bluetooth streaming music, FM/AM radio tuner, file management, etc.
Apart from these features, there are also some optional functions being supported to be added to this unit according to your preference, such as car DVR, rear view camera, OBD2, TPMS, etc.
By taking full advantage of these comprehensive features, you can not only create a more convenient and comfortable car interior environment but also upgrade your in-car life.
Wish you like this unit and good luck to you!