644 views

The Full Tutorial on a 2016 Peugeot 308 Car Radio Replacement for Beginners

Compared with your factory radio, a new aftermarket car radio should be equipped with higher configurations, performance and more advanced features. Therefore, if you find your factory radio is too outdated to support some modern features, you can just remove it and install a new multifunctional car radio in your car. Today I would like to introduce a 2016 Peugeot 308 car radio installation instruction from Seicane to you. Wish it is helpful for you.

2016 Peugeot 308 Car Radio after installation

2016 Peugeot 308 Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2016 Peugeot 308 car radio installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Wish you can get some inspiration from the above installation instruction. To overcome the difficulties you meet during the installation, please feel free to contact your dealer or seek help from a professional. Or you can directly go to a car radio upgrade center and ask a technician to help you install the new car radio.

Anyway, before installation, please check the compatibility between your new car radio and your car. If the new car radio is not compatible enough, you’d better quit it and pick a suitable one again. Here I would like to share an excellent 2016 Peugeot 308 car radio from Seicane with you. Here comes the link, please click:

https://www.seicane.com/2016-peugeot-308-android-radio-gps-navigation-system-support-canbus-bluetooth-music-usb-1080p-video-3g-wifi-obd2-mirror-link-rearview-s0417

This car radio runs on the stable Android 6.0 operation system and a powerful quad-core CPU processor to enhance its capability and performance. With it installed in your car, you are able to embrace a wonderful driving experience.

With the assistance of the worldwide real-time GPS navigation system, you will have no trouble in knowing your current locations and finding the right way to reach your desired destinations through turn-by-turn directions and voice prompt. Besides, with dual zone function, you can freely listen to music from radio/AV/DVD/TV etc while navigating.

Besides, through the wireless Bluetooth connection between your mobile phone and this car radio, you can make, receive, reject and mute Bluetooth hands-free calls as well as enjoy streaming music from your phone playlists.

Wish you enjoy your relaxing trip accompanied by this car radio. Good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>