How to Install a 2014 2015 Toyota Highlander Car Stereo to Fix Radio Problems in an Effective Way

2014 2015 Toyota Highlander car radio after installation

To enjoy more convenience and enjoyment in car, it is wise of you to think about removing your factory radio and installing a new aftermarket car radio. The following is a 2014 2015 Toyota Highlander car radio installation instruction from Seicane. If you own the same or similar dashboard and would like to upgrade your factory radio, you can refer to the instruction carefully. Wish you can learn something useful from it.

2014 2015 Toyota Highlander car radio after installation

2014 2015 Toyota Highlander car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2014 2015 Toyota Highlander car radio installation instruction

1. Carefully pry lower dash panel out.

Carefully pry lower dash panel out

Carefully pry lower dash panel out

1-1

1-1

2. Grip onto the A/C control panel, and give it quick tug to remove.

Grip onto the A/C control panel, and give it quick tug to remove

Grip onto the A/C control panel, and give it quick tug to remove

3. Gently pry out air vent and bazel above the radio.

Gently pry out air vent and bazel above the radio

Gently pry out air vent and bazel above the radio

4. There are four 10mm bolts to be removed.

There are four 10mm bolts to be removed

There are four 10mm bolts to be removed

5. Remove these four 10mm bolts with a screwdriver.

Remove these four 10mm bolts with a screwdriver

Remove these four 10mm bolts with a screwdriver

6. Gently pull the radio out of the dashboard.

Gently pull the radio out of the dashboard

Gently pull the radio out of the dashboard

7. Disconnect the connectors and cables at the back of the radio.

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place.

 

Wish the above installation instruction can be helpful for you to some degree. If you have any problems, you can contact your dealer, communicate with someone experienced or ask a professional for help. If you still think it hard to finish the whole installation process on your own, you can directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. Besides, if you don’t know how to select an ideal car radio for your car, here I would like to recommend an amazing 2014 2015 Toyota Highlander car radio from Seicane to you. For more details, please click:

https://www.seicane.com/seicane-s121061-10-1-inch-android-in-dash-bluetooth-gps-navigation-system-for-2014-2015-toyota-highlander-with-hd-1024-600-touch-screen-3g-wifi-radio-rds-mirror-link-obd2-rearview-camera-aux-usb-sd-steering-wheel-control-quad-core-cpu-s121061

This powerful car radio is running on the stable Android 6.0 operation system and a high-quality quad-core CPU processor.

Even though you are not good at identifying directions, under the guidance of turn-by-turn directions and voice prompts provided by the high-accuracy 3D GPS navigation system, you are able to easily locate where you are and navigate to any locations you would like to go to. Besides, this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you to gain a lot of convenience and enjoyment as long as you connect your Bluetooth-enabled mobile phone to this car radio.

Wish you like this multifunctional car radio and good luck to you!

The Top Instruction on a 2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER Bluetooth DVD

2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER Bluetooth DVD after installation

Are you searching online for a car radio installation guide? As you know, a correct car radio installation guide can be much helpful during the whole installation process of a new car radio. If you happen to own a 2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER and plan to upgrade your factory radio, you can read this article and take it as reference before you start your work.

2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER Bluetooth DVD after installation

2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER Bluetooth DVD after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER car radio installation instruction

1. Carefully pry lower dash panel out.

Carefully pry lower dash panel out

Carefully pry lower dash panel out

2. Grip onto the A/C control panel, and give it quick tug to remove.

Grip onto the A/C control panel, and give it quick tug to remove

Grip onto the A/C control panel, and give it quick tug to remove

3. Gently pry out air vent and bazel above the radio.

Gently pry out air vent and bazel above the radio

Gently pry out air vent and bazel above the radio

4. There are four 10mm bolts to be removed.

There are four 10mm bolts to be removed

There are four 10mm bolts to be removed

5. Remove these four 10mm bolts with a screwdriver.

Remove these four 10mm bolts with a screwdriver

Remove these four 10mm bolts with a screwdriver

6. Gently pull the radio out of the dashboard.

Gently pull the radio out of the dashboard

Gently pull the radio out of the dashboard

7. Disconnect the connectors and cables at the back of the radio.

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place.

 

Before installation, please make clear every detailed step. If you have any doubts, you can browse some related websites, contact with your dealer, or seek help from a professional. Or you can directly arrange a professional technician to help you install the new car radio. While for the selection of an ideal car radio, if you have no ideas, I’d like to recommend an amazing 2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER car radio from Seicane to you. For more details, please click:

https://www.seicane.com/android-2008-2009-2010-2011-2014-toyota-highlander-gps-navigation-bluetooth-radio-wifi-usb-dvd-player-support-backup-camera-dvr-obd2-1080p-video-hd-tv-s18t012

This car radio is running on the advanced and stable Android 7.1.2 operation system which can greatly facilitate the operation as well as offer a stable system.

Under the guidance of the turn-by-turn directions and voice prompts provided by the 3D GPS navigation system, you can easily locate where you are and find the right way to reach your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Besides, with the built-in GPS navigation system, you will know your current locations and navigate to your desired destinations with the help of the accurate guidance.

Just enjoy your driving accompanied by this car radio. Good luck!

How to Upgrade a 2015 Toyota Highlander GPS Nav Bluetooth Car Radio Support 4G Network

2015 Toyota Highlander GPS Nav Bluetooth Car Radio after installation

Do you want to get some methods to achieve the installation of a new car radio all by yourself?

The following is a detailed installation instruction for a 2015 Toyota Highlander car radio from Seicane. If you own the same or similar dashboard and also plan to make a car radio replacement for your beloved car, you might as well refer to the following installation instruction.

2015 Toyota Highlander GPS Nav Bluetooth Car Radio after installation

2015 Toyota Highlander GPS Nav Bluetooth Car Radio after installation

Here are some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2015 Toyota Highlander car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Use a plastic removal tool to remove the panel and frame around the A/C vent.

Use a plastic removal tool to remove the panel and frame around the A/C vent

Use a plastic removal tool to remove the panel and frame around the A/C vent

2-1

2-1

3. Use the plastic removal tool to pry the air conditioning vents and remove them.

Use the plastic removal tool to pry the air conditioning vents and remove them

Use the plastic removal tool to pry the air conditioning vents and remove them

4. Remove the screws that fixed the radio on the dashboard.

5. Gently take out the original car radio.

Gently take out the original car radio

Gently take out the original car radio

6. Disconnect the connectors and cables at the back of the radio.

7. Check all the accessories for the new Seicane car stereo.

8. Connect the harnesses to the back of the new Seicane car stereo.

9. Connect the Seicane car stereo to your original stereo’s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place. All the installation is done.

 

Above is the whole installation instruction on a 2015 Toyota Highlander car radio. If you cannot understand all these steps, you’d better turn to your dealer for help or just directly arrange a professional to help you install the new car radio. Anyway, before installation, please carefully select an ideal car radio for your beloved car. If you have no ideas, you might as well check out the following link which is a marvelous 2015 Toyota Highlander car radio from Seicane.

https://www.seicane.com/2015-toyota-highlander-android-gps-navigation-system-touchscreen-radio-bluetooth-obd2-dvr-rearview-camera-tv-1080p-4g-wifi-mirror-link-steering-wheel-control-s18t222

This car radio is running on the intelligent and powerful Android 7.1 operation system and a 1.6 GHz quad-core RK PX3 CPU processor, which can give you a much smoother and faster operation experience.

With the guidance of the powerful worldwide real-time GPS navigation system of high accuracy, you are capable of locating where you are now and finding the right way to reach your ideal destinations accurately.

Additionally, through Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, during driving you can dial, answer, reject and mute hands-free phone calls as well as listen to music streaming from your phone music playlist.

Wish you like this unit and have a good day!

The Top Instruction on a 2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER Bluetooth DVD GPS Car Radio Upgrade

2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER Bluetooth DVD after installation

Are you searching online for a car radio installation guide? As you know, a correct car radio installation guide can be much helpful during the whole installation process of a new car radio. If you happen to own a 2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER and plan to upgrade your factory radio, you can read this article and take it as reference before you start your work.

2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER Bluetooth DVD after installation

2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER Bluetooth DVD after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER car radio installation instruction

1. Carefully pry lower dash panel out.

Carefully pry lower dash panel out

Carefully pry lower dash panel out

1-1

1-1

2. Grip onto the A/C control panel, and give it quick tug to remove.

Grip onto the A/C control panel, and give it quick tug to remove

Grip onto the A/C control panel, and give it quick tug to remove

3. Gently pry out air vent and bazel above the radio.

Gently pry out air vent and bazel above the radio

Gently pry out air vent and bazel above the radio

4. There are four 10mm bolts to be removed.

There are four 10mm bolts to be removed

There are four 10mm bolts to be removed

5. Remove these four 10mm bolts with a screwdriver.

Remove these four 10mm bolts with a screwdriver

Remove these four 10mm bolts with a screwdriver

6. Gently pull the radio out of the dashboard.

Gently pull the radio out of the dashboard

Gently pull the radio out of the dashboard

7. Disconnect the connectors and cables at the back of the radio.

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place.

 

Before installation, please make clear every detailed step. If you have any doubts, you can browse some related websites, contact with your dealer, or seek help from a professional. Or you can directly arrange a professional technician to help you install the new car radio. While for the selection of an ideal car radio, if you have no ideas, I’d like to recommend an amazing 2008 2009 2010 2011 2012-2014 TOYOTA HIGHLANDER car radio from Seicane to you. For more details, please click:

https://www.seicane.com/android-2008-2009-2010-2011-2014-toyota-highlander-gps-navigation-bluetooth-radio-wifi-usb-dvd-player-support-backup-camera-dvr-obd2-1080p-video-hd-tv-s18t012

This car radio is running on the advanced and stable Android 7.1.2 operation system which can greatly facilitate the operation as well as offer a stable system.

Under the guidance of the turn-by-turn directions and voice prompts provided by the 3D GPS navigation system, you can easily locate where you are and find the right way to reach your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Besides, with the built-in GPS navigation system, you will know your current locations and navigate to your desired destinations with the help of the accurate guidance.

Just enjoy your driving accompanied by this car radio. Good luck!