2,303 views

Simple 9 steps of 2005-2009 Skoda SUPERB Radio installation

These days, Skoda is becoming a hot trend for most people. And 2005-2009 Skoda SUPERB is more and more popular. Though factory radio of Skoda SUPERB has some functions, but it still can’t meet all needs of most owners. The best solution is install a new aftermarket Skoda SUPERB Radio. If you may have no idea how to remove and install it. Here are some instructions of seicane aftermarket radio installation.

This is the seicane 2005-2009 Skoda SUPERB Radio after installation.

 

2005-2009 Skoda SUPERB Radio after installation

2005-2009 Skoda SUPERB Radio after installation

By the way, if you didn’t have a new aftermarket radio yet. I’d like to share a good one with you.

http://www.seicane.com/8-inch-3g-wifi-android-radio-navigation-system-for-2005-2009-skoda-superb-with-dvd-player-mirror-link-capacitive-multi-touch-screen-obd-dvr-tv-bluetooth-rear-view-camera-ipod-s168032

This aftermarket radio has High quality RK3188 1.6 GHz Cortex A9 Quad-core processor with 1GB Samsung DDR3. And 8 inch HD 1024*600 multi-touch screen with smooth operation, high sensitivity and abundant interaction for the better view of your road ahead. The most attractive is it’s intelligent pure android 4.4.4 operation system with exquisite and user-friendly user interface. You can set any of your favorite application icons as shortcut on the main menu and set the position of the icons according to your preference.

Do you think this unit fits your Skoda SUPERB perfect? Let’s remove the factory radio now.

 

2005-2009 Skoda SUPERB Radio pre-installation

1)Before connecting,please make sure the ignition is off to avoid short circuit.

2)Ensure connect the yellow and red power cable at last.

3)Ensure that all loose wires are isolated with electrical tape.

4)Ensure don’tangle the wire when tighten the moving parts(Such as seat rails).

5)Ensure that all GND is connected to the same place.

6)Using the improper fuse may cause damage of fire,so when replace the fuse,please consult the professional.

2005-2009 Skoda SUPERB Radio installation

1) Pry up the panel around the original Skoda SUPERB Radio with plastic tool.

2005-2009 Skoda SUPERB Radio installation step 1

2005-2009 Skoda SUPERB Radio installation step 1

2) Pick up the panel on the original car radio.

2005-2009 Skoda SUPERB Radio installation step 2

2005-2009 Skoda SUPERB Radio installation step 2

3) Remove the four screws around the radio with a screwdriver.

2005-2009 Skoda SUPERB Radio installation step 3

2005-2009 Skoda SUPERB Radio installation step 3

4) Pull out the original radio.

2005-2009 Skoda SUPERB Radio installation step 4

2005-2009 Skoda SUPERB Radio installation step 4

5) Disconnect the radio antenna in the back of the radio.

2005-2009 Skoda SUPERB Radio installation step 5

2005-2009 Skoda SUPERB Radio installation step 5

6)Unplug the electrical plugs running to the back of the radio.

2005-2009 Skoda SUPERB Radio installation step 6

2005-2009 Skoda SUPERB Radio installation step 6

7)Make antennas and cables connected step by step as installation instructions show,and you should be very careful when you are doing this for it will affect whole procedure.

8)Connected the new aftermarket radio to your Skoda SUPERB, you should check whether your connections are correct, the new unit is in right position,and you’d better have a tidy for the cables.

9)Finally, you can turn on your new aftermarket radio. If it works without problem, and then you can fix four screws on your new aftermarket radio. Finally put trim panel on the surface of your new Skoda SUPERB Radio.

 

Hope you can learn something from this blog.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>