935 views

Professional installation steps for a 2009-2014 Toyota Sienna car stereo with 3G WiFi Bluetooth Music USB SD 1024*600 Multi-touch Capacitive Screen HD 1080P Video

To install an ideal car stereo in your car, what can be much helpful? It is absolutely a step-by-step installation guide. If you are a car owner of a2009-2014 Toyota Sienna, you must be quite familiar with the picture below. It’s a 2009-2014 Toyota Sienna car stereo from Seicane taken after the installation. With the same dashboard, you can refer to this professional 2009-2014 Toyota Sienna car stereo installation instruction if you are going to install your new stereo in your car.

2009-2014 Toyota Sienna car stereo after installation

2009-2014 Toyota Sienna car stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009-2014 Toyota Sienna car stereo installation guide

1.Use a lever to pry along the plastic panel and remove it.

Use a lever to pry along the plastic panel and remove it

Use a lever to pry along the plastic panel and remove it

2. Release the panel under the 50 shift and hang it on the panel.

Release the panel under the 50 shift and hang it on the panel

Release the panel under the 50 shift and hang it on the panel

3. Remove the a/c control unit with your hands.

Remove the ac control unit with your hands

Remove the ac control unit with your hands

4. Unplug the connectors at the back of the a/c control unit.

Unplug the connectors at the back of the ac control unit

Unplug the connectors at the back of the ac control unit

5. Remove the screws holding the factory radio in place with a screwdriver.

Remove the screws holding the factory radio in place with a screwdriver

Remove the screws holding the factory radio in place with a screwdriver

6. Take the factory radio out of the dashboard.

Take the factory radio out of the dashboard

Take the factory radio out of the dashboard

7. Disconnect the connectors at the back of factory radio.

8. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

9. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

10. Connect the Seicane car stereo to your original car radio ‘s plugs.

11.Put the new Seicane car stereo into your dashboard, you should check whether your connections are correct, the new unit is in right position, and you’d better have a tidy for the cables.

12. Check whether the new Seicane car stereo is working without problem.

13. If there is no problem, firm removed screws that are put aside, then make trim panel back on your new Seicane car stereo.

Can you finish the installation of this 2009-2014 Toyota Sienna car stereo on your own with the help of this step-by-step installation guide? If not, you’d better ask a professional for help, or you can go to a car radio upgrade center to have it installed.

In addition, before the installation, it’s necessary for you to check the compatibility of your new car stereo. If you have no idea about this, you can refer to this popular Toyota Sienna car stereo from Seicane. Here’s the link, please click:

http://www.seicane.com/seicane-s128006-android-2009-2014-toyota-sienna-aftermarket-car-stereo-radio-dvd-gps-navigation-system-with-3g-wifi-bluetooth-music-mirror-link-obd2-usb-sd-1024-600-multi-touch-capacitive-screen-hd-1080p-video-steering-wheel-control-s12800

This 8 inch 2009-2014 Toyota Sienna car stereo comes with a built-in gps navigation system, you can have the accurate directions to your desired destinations with the least time. What’s more, you can also use this New Focus double din navigation for bluetooth hands-free phone calls or streaming music by connecting the bluetooth and your bluetooth-enabled cell phone. Besides, the functionality of USB/SD/iPod connection for multimedia playing can brings you lots of pleasure and relaxation. Just have fun with it!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>