The Concise Tutorial on the Removal and Installation of a 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 Car Radio with GPS Bluetooth Function

1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio after installation

If you find that your factory radio is not up-to-date enough for you to get access to some modern and brand new features, it is suggested that you can remove your factory radio and install a new aftermarket car radio for your car. If you get an ideal car radio installed in your car, you can embrace a brand new driving experience. The following is a 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio installation instruction from Seicane. You can refer to it if you own the same or similar dashboard.

1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio after installation

1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Use a plastic trim tool to remove trim strip.

Use a plastic trim tool to remove trim strip

Use a plastic trim tool to remove trim strip

3. Remove screws marked by red arrows.

Remove screws marked by red arrows

Remove screws marked by red arrows

4. Take original radio out of the car.

Take original radio out of the car

Take original radio out of the car

5. Pull out original power plug of the car.

Pull out original power plug of the car

Pull out original power plug of the car

6. Connect the power cables as the picture shows.

Connect the power cables as the picture shows

Connect the power cables as the picture shows

7. Remove screws in the spare tire in the trunk.

Remove screws in the spare tire in the trunk

Remove screws in the spare tire in the trunk

8. Take out the spare tire.

Take out the spare tire

Take out the spare tire

9. Remove four screws marked with red arrows.

Remove four screws marked with red arrows

Remove four screws marked with red arrows

10. Remove screws in triangle crutch.

Remove screws in triangle crutch

Remove screws in triangle crutch

11. Take out triangle crutch.

Take out triangle crutch

Take out triangle crutch

12. Connect original plug of the car with power plug of DVD GPS.

Connect original plug of the car with power plug of DVD GPS

Connect original plug of the car with power plug of DVD GPS

13. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

14. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

15. Connect the Seicane car radio to your original car radio s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash and install the four screws.

18. Install the trim panel into its original place.

 

Now do you have a general understanding of the above removal and installation process? If you still have any doubts, please feel free to consult your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. Anyway, it is essential to select an ideal car radio for your beloved car, if you have no ideas, you can check out the following link which is an amazing 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/in-dash-1996-2003-bmw-5-series-e39-520i-523i-525i-m5-android-gps-navigation-system-with-touch-screen-3g-wifi-tpms-usb-dvr-obdii-rear-camera-aux-16g-flash-steering-wheel-control-s089993

This amazing car radio is running on the the stable Android 8.0 operation system and a strong eight-core CPU processor as well as 4GB RAM and 32GB ROM, which enables you to have a much smoother, faster and easier operation experience than before.

Even you don’t have a good sense of directions, you can make full use of this unit’s built-in GPS module to locate where you are currently and find the right way to get to your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

What’s more, under the wireless Bluetooth technology, you can make your Bluetooth-enabled mobile phone pair with this car radio, so you can freely get access to both Bluetooth hands-free phone calls and Bluetooth streaming music for convenience and enjoyment.

If you like this unit, just add it to your shopping cart. Good luck to you!

How to remove and upgrade a 2008 2009 2010 2011-2015 Mazda 6 Rui wing Android GPS Navigation Bluetooth USB Car Radio

2008 2009 2010 2011-2015 Mazda 6 Rui wing Car Radio after installation

If your factory radio comes with several simple functions, will you still keep it in your car? Under this circumstance, in my opinion, it is wise of you to replace your factory radio with a brand new multifunctional car radio if you would like to enjoy more convenience and enjoyment as well as embrace a brand new driving experience. The following is a 2008 2009 2010 2011-2015 Mazda 6 Rui wing car radio installation instruction from Seicane which I would like to share with you. If you own the same or similar dashboard, you’d better refer to this instruction.

2008 2009 2010 2011-2015 Mazda 6 Rui wing Car Radio after installation

2008 2009 2010 2011-2015 Mazda 6 Rui wing Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2008 2009 2010 2011-2015 Mazda 6 Rui wing car radio installation instruction

1. Remove the panel on downside of the e-brake. Please make sure your e-brake is up.

Remove the panel on downside of the e-brake. Please make sure your e-brake is up

Remove the panel on downside of the e-brake. Please make sure your e-brake is up

2. Remove the shift knob by screwing it off counterclockwise.

Remove the shift knob by screwing it off counterclockwise

Remove the shift knob by screwing it off counterclockwise

2-1

2-1

3. Remove the plastic part around the shift lever.

Remove the plastic part around the shift lever

Remove the plastic part around the shift lever

4. Release two side trims.

Release two side trims

Release two side trims

4-1

4-1

4-2

4-2

5. Remove the trim pieces around the air conditioning control. You may start from the bottom.

Remove the trim pieces around the air conditioning control. You may start from the bottom

Remove the trim pieces around the air conditioning control. You may start from the bottom

5-1

5-1

6. Remove four screws that fixed the AC control so as to drop down the AC control.

Remove four screws that fixed the AC control so as to drop down the AC control

Remove four screws that fixed the AC control so as to drop down the AC control

6-1

6-1

7. Unscrew two bottom screws that are holding the radio.

Unscrew two bottom screws that are holding the radio

Unscrew two bottom screws that are holding the radio

8. Grab the top panel so as to remove it.

Grab the top panel so as to remove it

Grab the top panel so as to remove it

8-1

8-1

9. Remove two last screws that are holding the radio with a screwdriver.

Remove two last screws that are holding the radio with a screwdriver

Remove two last screws that are holding the radio with a screwdriver

10. Gently take out the original radio.

Gently take out the original radio

Gently take out the original radio

11. Disconnect connectors and cables at the back of the radio. Please use a removal tool to help you.

Disconnect connectors and cables at the back of the radio. Please use a removal tool to help you

Disconnect connectors and cables at the back of the radio. Please use a removal tool to help you

12. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

13. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

14. Connect the Seicane car radio to your original stereo’s plugs.

15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car radio into the dash.

17. Put everything into their original place. All the installation is done.

 

Wish the above installation steps can be helpful for you. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional. If you still think the whole installation process is too complicated for you, you can directly ask a professional technician to help you install the new car radio. Besides, it is very essential for you to pick an ideal car radio. If you have no ideas, you can check out the following link which is an amazing 2008 2009 2010 2011-2015 Mazda 6 Rui wing car radio from Seicane.

https://www.seicane.com/in-dash-radio-hd-touchscreen-android-for-2008-2009-2010-2011-2015-mazda-6-rui-wing-gps-navigation-system-support-steering-wheel-control-dvr-obdii-3g-wifi-backup-camera-dab-s04144

This car radio is loaded with the advanced and stable Android 6.1 operation system and a powerful quad-core CPU processor, which comes with a lot of practical and entertainment features to meet your different needs in car.

Even if you don’t have good sense of directions, under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you can easily know your current locations and find the right way to reach any locations you would like to go to. What’s more, this car radio comes with dual zone function, so you can freely listen to radio, USB or SD card music playback under GPS mode.

Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, you can connect your Bluetooth-enabled mobile phone to this car radio, so you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music.

If you like this unit, please don’t hesitate to add this unit to your shopping cart. Good luck!

How to Replace a 2005 2006 2007 2008-2012 BMW 3 Series E90 E91 E92 E93 Car Radio Not Working with Aux Input Stereo Speaker Head Unit Effortlessly

2005 2006 2007 2008-2012 BMW 3 Series E90 E91 E92 E93 Manual Air-conditioner car radio after installation

As an owner of 2005 2006 2007 2008-2012 BMW 3 Series E90 E91 E92 E93,would you like to try to remove your factory radio so as to install a new car radio? Or would you like to learn some skills for the car radio installation? If your answers toward these questions are all “yes”, then you might as well refer to the following 2005 2006 2007 2008-2012 BMW 3 Series E90 E91 E92 E93 car radio installation instruction from Seicane. Wish it is helpful for you to some extent.

2005 2006 2007 2008-2012 BMW 3 Series E90 E91 E92 E93 Manual Air-conditioner car radio after installation

2005 2006 2007 2008-2012 BMW 3 Series E90 E91 E92 E93 Manual Air-conditioner car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2005 2006 2007 2008-2012 BMW 3 Series E90 E91 E92 E93 car radio installation instruction

1. The original dashboard before installation.

The original dashboard before installation

The original dashboard before installation

2. Pry the panel off with a lever. You need to lift the air-conditioning assembly and don’t pry the air-conditioning panel off directly.

Pry the panel off with a lever. You need to lift the air-conditioning assembly and don't pry the air-conditioning panel off directly

Pry the panel off with a lever. You need to lift the air-conditioning assembly and don’t pry the air-conditioning panel off directly

3. Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.

Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out

Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out

3-1

3-1

4. Disconnect the power plug behind the CD player and the plug of the radio aerials.

Disconnect the power plug behind the CD player and the plug of the radio aerials

Disconnect the power plug behind the CD player and the plug of the radio aerials

4-1

4-1

5. Take off the plastic bracket frame behind the CD player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles (no.8).

Take off the plastic bracket frame behind the CD player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles (no.8)

Take off the plastic bracket frame behind the CD player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles (no.8)

6. Unscrew the 2 turnbuckles (no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel.

Unscrew the 2 turnbuckles (no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel

Unscrew the 2 turnbuckles (no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel

7. Check all the accessories for the new Seicane stereo.

8. Connect the harnesses to the back of the new Seicane stereo.

9. Connect the Seicane stereo to your original radio’s plugs.

10. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane stereo into the dash.

12. Put everything into their original place.

 

Wish you can gain some help from the above installation guide. If you meet any problems and don’t know how to deal with these problems, you can contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to remove the factory radio and install the new car radio by yourself, you can directly go to a car radio upgrade center and arrange a professional technician to help you.

As for the selection of an ideal car radio, if you don’t know how to select a compatible car radio for your beloved car, you can refer to the following link which is a remarkable 2005 2006 2007 2008-2012 BMW 3 Series E90 E91 E92 E93 car radio from Seicane. For more information, please click:

https://www.seicane.com/2005-2006-2007-2008-2012-bmw-3-series-e90-e91-e92-e93-manual-air-android-bluetooth-radio-dvd-player-head-unit-support-gps-navi-hd-touchscreen-rearview-camera-wifi-usb-mirror-link-1080p-video-s32733f

This car radio’s operation system has been upgraded to the most advanced Android 8.0 operation system and it is loaded with the eight-core CPU processor as well as 4GB RAM and 32GB ROM. Thanks to the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system of high accuracy, you can easily know where you are currently and have the most suitable route option to reach your desired destinations. Additionally, this unit also comes with dual zone function, which enables you to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone and this car radio, so you can dial, answer, reject and mute hands-free phone calls as well as enjoy Bluetooth streaming music from your phone playlist.

Wish you like this unit and good luck to you!

How to remove and install a 2013 2014 Toyota Vios Bluetooth GPS Navigation Car Radio Touch Screen Stereo

2013 2014 Toyota Vios Car Radio after installation

There is no denying that with an ideal car radio in your car, your driving experience will be improved to a large extent. However, your factory radio may not satisfy you since it has been used for a long time and its performance is not high. Under this circumstance, you can think about replacing your factory radio with a new aftermarket car radio. While for the installation, if you would like to gain a general understanding of it, you can refer to a related installation guide. The following is a 2013 2014 Toyota Vios car radio installation instruction from Seicane which can be taken as your reference.

2013 2014 Toyota Vios Car Radio after installation

2013 2014 Toyota Vios Car Radio after installation

Here are some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2013 2014 Toyota Vios car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Remove the panel with your hands, please use a plastic removal tool if necessary.

Remove the panel with your hands, please use a plastic removal tool if necessary

Remove the panel with your hands, please use a plastic removal tool if necessary

2-1

2-1

3. Disconnect the connector at the back of the air vent.

Disconnect the connector at the back of the air vent

Disconnect the connector at the back of the air vent

4. Use a screwdriver to remove four screws that are holding the original car radio.

Use a screwdriver to remove four screws that are holding the original car radio

Use a screwdriver to remove four screws that are holding the original car radio

5. Gently take out the original car radio from the dashboard.

6. Unplug the connectors and cables at the back of the original car radio.

Unplug the connectors and cables at the back of the original car radio

Unplug the connectors and cables at the back of the original car radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio’s plugs.

10. Put the new Seicane car radio into the dash.

11. Turn on the new Seicane car radio and have a comprehensive check if it works well.

12. Install 4 screws back to their original position.

13. Install the trim panel back to its original place.

 

Wish you learn some useful skills from the above installation steps. If you meet any problems you don’t know how to deal with, please don’t worry. You can seek help from your dealer, someone experienced or a professional. Or if you still think it hard to install the new car radio, you can straightly arrange a professional technician to help install the new car radio. Anyway, before installation, please do carefully select an ideal car radio for your beloved car. If you have no ideas, you can refer to the following link which is a smart 2013 2014 Toyota Vios car radio from Seicane. For more details, please click:

https://www.seicane.com/2013-2014-toyota-vios-hd-touchscreen-android-radio-gps-navigation-system-with-bluetooth-wifi-1080p-video-dvr-mirror-link-s0452

Loaded with the stable Android 6.1 operation system and a high-quality quad-core CPU processor, this car radio from Seicane can be regarded as one of the best replacements for your factory radio.

When you get it installed in your car, you will find that almost all your different needs can be met since it comes with a wide range of comprehensive features, including 3D GPS navigation, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, file management, USB & SD card connection, etc.

Thanks to the turn-by-turn directions and voice prompts provided by the high-end GPS navigation system, you are able to know your current locations and find the right way to reach your ideal destinations.

Besides, this car radio also comes with entertainment features to bring you fun.

Just quickly add this car radio to your shopping cart if you like it.

Quick Remove and Upgrade a 2008 2009 2010 2011-2012 KIA Forte(AT) Bluetooth GPS Navigation Mirror Link Car Stereo

2008 2009 2010 2011-2012 KIA Forte(AT) car radio after installation

At present, it won’t cost a car owner too much money to replace his factory radio with a new aftermarket car radio for getting access to better performance and a lot of modern features. So now more and more car owners would like to select an ideal car radio to replace their old factory radios. The following is a 2008 2009 2010 2011-2012 KIA Forte(AT) car radio installation instruction from Seicane, which you can refer to if you own the same or similar dashboard. Wish you can learn something useful from it.

2008 2009 2010 2011-2012 KIA Forte(AT) car radio after installation

2008 2009 2010 2011-2012 KIA Forte(AT) car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2008 2009 2010 2011-2012 KIA Forte(AT) car radio installation instruction

1. Remove the right air conditioner vent with a removal tool, and set it aside.

Remove the right air conditioner vent with a removal tool, and set it aside

Remove the right air conditioner vent with a removal tool, and set it aside

2. Remove the left air conditioner vent in the same way as step 1, and set it aside.

Remove the left air conditioner vent in the same way as step 1, and set it aside

Remove the left air conditioner vent in the same way as step 1, and set it aside

3. Unscrew all the screws holding the original car radio in dash with a screwdriver.

Unscrew all the screws holding the original car radio in dash with a screwdriver

Unscrew all the screws holding the original car radio in dash with a screwdriver

4. Gently take the original car radio out of the dash.

Gently take the original car radio out of the dash

Gently take the original car radio out of the dash

5. Disconnect all connectors at the back of the original car radio.

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original car radio ‘s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10.Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Wish the above installation steps are useful for you. If you come across any problems that you don’t know how to deal with, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly go to a car radio upgrade center to get the new car radio installed by a professional technician. Since it is very significant for you to pick an ideal car radio. If you have no ideas, you can check out the following link which is a remarkable 2008 2009 2010 2011-2012 KIA Forte(AT) car radio from Seicane. Here come the link, please click:

https://www.seicane.com/android-gps-navigation-hd-touchscreen-radio-for-2008-2012-kia-forte-at-with-mirror-link-wifi-bluetooth-obd2-rearview-camera-1080p-video-s0492

This car radio is equipped with the stable Android 6.1 operation system and a high-quality quad-core CPU processor to enhance its capabilities and performance. Therefore, with this car radio installed in your car, you can enjoy a much smoother, faster and easier operation experience.

Under the guidance of the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system, you will be able to easily locate where you are currently and help you find the right way to reach any locations you would like to go to. And while navigating, you can also listen to your favorite music for getting enjoyment.

Besides, thanks to the wireless Bluetooth technology, without taking your hands off the steering wheel, you can freely get access to Bluetooth hands-free phone calls and Bluetooth streaming music through the connection between your Bluetooth-enabled mobile phone and this car radio.

If you like this unit, just hurry up to add it to your shopping cart right now. Wish you have a wonderful driving experience accompanied by this car radio. Good luck!

How to Remove and Install a 2005 2006 2007 2008-2015 SUZUKI GRAND VITARA Car Radio with GPS Navigation System Bluetooth DVD Player

2005 2006 2007 2008-2015 SUZUKI GRAND VITARA car radio after installation

If you are looking forward to having a more relaxing in-car environment in your car, it will be a great ideas for you to remove your outdated factory radio and install a brand new multifunctional car radio. And you don’t need to worry whether the installation process is too complicated or not. Actually, you can refer to a related car radio installation instruction to deal with the new car radio installation. Here I would like to share a detailed 2005 2006 2007 2008-2015 SUZUKI GRAND VITARA car radio installation guide from Seicane with you. If you also have the same or similar dashboard, you can take this guide as a reference.

2005 2006 2007 2008-2015 SUZUKI GRAND VITARA car radio after installation

2005 2006 2007 2008-2015 SUZUKI GRAND VITARA car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2005 2006 2007 2008-2015 SUZUKI GRAND VITARA car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Open the storage box. Grasp two side panels and remove them. Please use a plastic removal tool if necessary.

3. Unscrew mounting screws that are holding the radio and the AC control.

Unscrew mounting screws that are holding the radio and the AC control

Unscrew mounting screws that are holding the radio and the AC control

3-1

3-1

4. Pull the original radio out from the dash.

Pull the original radio out from the dash

Pull the original radio out from the dash

5. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio

Unplug the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

Before installation, please make clear every detailed step. If you meet any difficulties and don’t know how to overcome them, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or for avoiding damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. If you don’t know what kind of car radio can fit your car very well, you may check out the following link which is a remarkable 2005 2006 2007 2008-2015 SUZUKI GRAND VITARA car radio from Seicane.

https://www.seicane.com/inch-aftermarket-android-touch-screen-gps-navigation-system-for-2005-2015-suzuki-grand-vitara-support-bluetooth-radio-tpms-dvr-obd-ii-rear-camera-aux-headrest-monitor-control-usb-sd-hd-1080p-video-3g-wifi-s088701f

With this remarkable car radio installed in your car, you will undoubtedly embrace a brand new driving experience since this car radio runs on the Android 6.1 operation system and a powerful quad-core CPU processor to improve its capacities, configuration and performance.

With the assistance of the worldwide real-time GPS navigation system, you are able to quickly locate where you are and accurately navigate to your desired destinations according to the turn-by-turn directions and voice prompts. This unit’s dual zone function enables you to freely listen  to your favorite music while navigating.

Through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you are able to dial, answer, reject and mute Bluetooth hands-free phone calls as well as enjoy Bluetooth streaming music with taking your hands off the steering wheel, which will largely guarantee your driving safety and convenience.

If you like this unit, just be quick to add it to your shopping cart!

Top Installation Instruction for a 2011 2012 2013 2014 2015 2016 JEEP Wrangler Touch Screen Bluetooth GPS Navigation Car Radio

2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio after installation

As the technology rapidly develops, an ideal car radio should be compatible with a higher performance and various functions. If your factory radio can not support many modern features, then it is wise of you to replace your factory radio with a new aftermarket car radio. This article will mainly introduce how to remove the factory radio and install the new aftermarket car radio for 2011 2012 2013 2014 2015 2016 JEEP Wrangler. If you have the same or similar dashboard,  you can refer to this instruction carefully.

2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio after installation

2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio after installation

Here are some tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and www.seicane.com make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio installation instruction

1. Get the window control out of the original place, so that you can get access to the screw that is behind it.

Get the window control out of the original place, so that you can get access to the screw that is behind it

Get the window control out of the original place, so that you can get access to the screw that is behind it

2.  Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control.

Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control

Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control

2-1

2-1

3.  You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out.

You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out

You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out

3-1

3-1

4.  There is a clip and you need to push it down and make it come right off, after that, put this window control to the side.

There is a clip and you need to push it down and make it come right off, after that, put this window control to the side

There is a clip and you need to push it down and make it come right off, after that, put this window control to the side

4-1

4-1

4-2

4-2

5. Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray.

Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray

Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray

5-1

5-1

6. Next you are going to pull away the trim under the steering wheel.

Next you are going to pull away the trim under the steering wheel

Next you are going to pull away the trim under the steering wheel

7. With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set.

With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set

With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set

8. Firmly pull the dash and it should be clipped out.

Firmly pull the dash and it should be clipped out

Firmly pull the dash and it should be clipped out

9. With the dash removed, you now can have access to the four bolts that are holding the original car radio.

With the dash removed, you now can have access to the four bolts that are holding the original car radio

With the dash removed, you now can have access to the four bolts that are holding the original car radio

10. Remove these four bolts with the seven millimeter screwdriver.

Remove these four bolts with the seven millimeter screwdriver

Remove these four bolts with the seven millimeter screwdriver

11.  With all the bolts removed, the original car radio should simply slide out from the original place.

With all the bolts removed, the original car radio should simply slide out from the original place

With all the bolts removed, the original car radio should simply slide out from the original place

12. Disconnect the factory connectors and wires at the back of the original car radio.

Running Man E278 20151220

Running Man E278 20151220

13. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

14. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

15. Connect the Seicane car radio to your original radio’s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash.

18. Put everything into their original place. All the installation is done.

 

Wish the above installation steps can be helpful for you. If you have any problems, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, it is very essential for you to pick an ideal car radio. If you have no ideas, you can refer to a remarkable 2011 2012 2013 2014 2015 2016 JEEP Wrangler car radio from Seicane. Here comes the link, please click:

https://www.seicane.com/android-2008-2014-2015-2016-2017-jeep-wrangler-bluetooth-gps-radio-car-stereo-with-mirror-link-wifi-steering-wheel-control-plug-and-play-h201


To be honest, this unit can be regarded as one of the best replacements for your factory radio since it is equipped with eight-core CPU, 4G RAM and 32G ROM, and it’s operation system has been upgraded to the most advanced and stable Android 8.0 version.

With the assistance of the worldwide real-time GPS navigation system, this unit enables you to know your current locations and find the right way to reach any locations you would like go to. And thanks to this unit’s dual zone function, you can listen to your favorite music while navigating.

Under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this unit so as to get access to Bluetooth hands-free phone calls as well as Bluetooth streaming music.

As for main features of this car radio, it can support the steering wheel control, headlamp output, reverse output and ACC output. And this unit can support hand brake detecting, the door information display and the original car’s amplifier.

If you like this unit, you can add it to your shopping cart right now. Good luck to you!

How to Remove and Upgrade a 2005 2006 2007 2008-2013 Suzuki Vitara Touch Screen Bluetooth GPS Sat Nav Car Stereo

2005 2006 2007 2008-2013 Suzuki Vitara Car Stereo after installation

If you would like to make your car get more featured, it will be a great idea for you to replace your factory radio with a brand new multifunctional car radio. And about the removal and installation, if you would like to have a try, you can search for a related installation instruction and refer to it carefully. The following is a 2005 2006 2007 2008-2013 Suzuki Vitara car radio installation instruction from Seicane, which I would like to share with you. If you own the same or similar dashboard, you can carefully follow this instruction to deal with the installation.

2005 2006 2007 2008-2013 Suzuki Vitara Car Stereo after installation

2005 2006 2007 2008-2013 Suzuki Vitara Car Stereo after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2005 2006 2007 2008-2013 Suzuki Vitara car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Open the storage box. Grasp two side panels and remove them. Please use a plastic removal tool if necessary.

3. Unscrew mounting screws that are holding the radio and the AC control.

Unscrew mounting screws that are holding the radio and the AC control

Unscrew mounting screws that are holding the radio and the AC control

4. Pull the original radio out from the dash.

Pull the original radio out from the dash

Pull the original radio out from the dash

5. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio

Unplug the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Wish you can get some skills from the above installation instruction. If you come across any problems, you can consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can straightly go to a car radio upgrade center to ask a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio before installation. If you have no ideas, here I would like to share an amazing 2005 2006 2007 2008-2013 Suzuki Vitara car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-radio-gps-navigation-system-for-2005-2013-suzuki-vitara-with-dvd-player-bluetooth-hd-1024-600-touch-screen-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-ipod-mirror-link-steering-wheel-control-usb-sd-s167056g

Upgraded to the most advanced Android 8.0 operation system and a powerful eight-core CPU processor, this car radio specific for 2005 2006 2007 2008-2013 Suzuki Vitara will make your operation get much smoother, faster and easier.

With the assistance of the world-wide real-time GPS navigation system of high-precision, according to turn-by-turn directions and voice prompts, you are able to locate your current locations accurately and quickly plan the most suitable route to get to your desired destinations.

Besides, when you add a one DIN DVD player to this car radio, you can freely play your favorite music, TV programs, videos, movies, etc, which will add a lot of joyfulness to your trip.

This car radio is at a reasonable price right now. If you like it, just don’t hesitate to add it to your shopping cart.

Best Install and upgrade for a 1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Bluetooth Radio GPS Sat Nav Car Stereo in an Effective Way

1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Stereo after installation

Have you ever thought about removing your factory radio and installing a brand new multifunctional car radio for your beloved car? If yes, you can search online for a related car radio and read it carefully to have a general understanding of the car radio installation. The following is a 1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car radio installation guide from Seicane, which can be taken as your reference if you own the same or similar dashboard. Wish this guide is helpful for you.

1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Stereo after installation

1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i Car Stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car stereo installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Remove the surrounding trim panel with a plastic removal tool.

Remove the surrounding trim panel with a plastic removal tool

Remove the surrounding trim panel with a plastic removal tool

2-1

2-1

2-2

2-2

3. Remove two screws fixed the radio on the dashboard.

Remove two screws fixed the radio on the dashboard

Remove two screws fixed the radio on the dashboard

3-1

3-1

4. Gently pull out the original car radio.

Gently pull out the original car radio

Gently pull out the original car radio

5. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio

Unplug the connectors and cables at the back of the radio

6. Remove the A/C control and unplug the connectors.

Remove the A/C control and unplug the connectors

Remove the A/C control and unplug the connectors

6-1

6-1

7. Remove two screws holding the heat vent.

Remove two screws holding the heat vent

Remove two screws holding the heat vent

7-1

7-1

8. Remove screws so as to remove radio frame.

Remove screws so as to remove radio frame

Remove screws so as to remove radio frame

9. Check all the accessories for the new Seicane car radio.

10. Connect the harnesses to the back of the new Seicane car radio.

11. Connect the Seicane car radio to your original radio’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for your installation to some degree. If you encounter any problems you cannot deal with by yourself, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to finish the whole installation process, you’d better arrange a technician to help you install the new car radio.

Besides, it is very crucial for you to select an ideal car radio for your beloved car. If you have no ideas, you can refer to the following link which is an amazing 1998 1999 2000 2001-2006 BMW 3 Series M3 E46 316i 318i 320i 323i 325i car radio from Seicane. Here comes the related link, please click:

https://www.seicane.com/radio-hd-touchscreen-android-for-1998-2006-bmw-3-series-m3-e46-316i-318i-320i-323i-325i-gps-navigation-system-with-wifi-bluetooth-usb-mirror-link-rearview-aux-s129006e

This car radio is running on the newest Android 8.0 operation system, a high-quality 8-core 1.5 GHz RK-PX5 A53 processor, and 32GB INand Flash as well as 4GB RAM. With this car radio installed in your car, you will embrace a brand new driving life.

Even though you are not good at identifying directions, you won’t get lost any more thanks to this car radio. Under the guidance of the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system, you are able to locate where you are currently and find the right way to arrive at your desired destinations. And this unit comes with dual zone function, so you can freely listen to your favorite music while navigating.

Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you as long as you pair your Bluetooth-enabled mobile phone with this unit.

If you like this unit, just don’t hesitate to add it to your shopping cart.

How to remove and upgrade a 1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215 CL600 CL550 CL55 AMG GPS Sat Nav Bluetooth Car Stereo Installation

1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) GPS Bluetooth Car Stereo after installation

Nowadays, there is a trend that more and more car owners would like to replace their factory radio with a new aftermarket car radio, which can help them gain convenience and entertainment so as to enrich their in-car life. The following is a 1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) car radio installation guide from Seicane for a 1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) car radio. If you have the same or similar dashboard, you may read it carefully to deal with the installation.

1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) GPS Bluetooth Car Stereo after installation

1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) GPS Bluetooth Car Stereo after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Place the key in the ignition, set the parking brake and shift to a lower gear depressing the brake.

3. Open up the pocket down below the AC control and remove two T20 Torx screws on the two corners. Then remove the pocket.

Open up the pocket down below the AC control and remove two T20 Torx screws on the two corners. Then remove the pocket

Open up the pocket down below the AC control and remove two T20 Torx screws on the two corners. Then remove the pocket

4. Grasp the bottom of the radio trim panel while prying the edges of the panel up along the sides of the dash. Then remove the panel.

Grasp the bottom of the radio trim panel while prying the edges of the panel up along the sides of the dash. Then remove the panel

Grasp the bottom of the radio trim panel while prying the edges of the panel up along the sides of the dash. Then remove the panel

5. Remove four T20 Torx screws that are holding the radio on the dashboard.

Remove four T20 Torx screws that are holding the radio on the dashboard

Remove four T20 Torx screws that are holding the radio on the dashboard

6. Pull the car radio out from the dash.

Pull the car radio out from the dash

Pull the car radio out from the dash

7. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio

Disconnect the connectors and cables at the back of the radio

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

Before installation, please make clear every detailed step. If you have any doubts, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Besides, if you still think it hard for you to install the new car radio, you can directly go to a car radio upgrade center and get the new car radio installed by a professional. Anyway, before installation, please carefully pick an ideal car radio for your beloved car. Here I would like to share a remarkable 1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-radio-hd-touchscreen-gps-navigation-for-1998-2005-mercedes-benz-cl-class-w215-cl600-cl550-cl55-amg-with-bluetooth-music-audio-aux-usb-wifi-steering-wheel-control-mirror-link-1080p-s6913g

Based on the advanced Android 8.0 operation system and a high-quality eight-core CPU processor, this all-in-one car radio can replace your factory radio because of its higher and better performance and configuration.

Thanks to the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you. So you can gain great convenience and entertainment.

Additionally, thanks to the worldwide real-time GPS navigation system, you are able to know where you are currently and get the most suitable route option to reach your desired destinations. And this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

If you like this car radio, don’t hesitate to add it to your shopping cart. Good luck!