Pursuing more entertaining and comfortable life has became a trend in daily life,and upgrading car stereos is one of the methods to realize it.
In fact you can achieve it by yourself if you know much about oem 2012 Nissan Patrol navigation system with 3G WIFI installation.So to friends who want to achieve it yourself,then you need to know clearly about how to remove 2012 Nissan Patrol audio system cd radio.
At first,we can have a look at following at next picture:2012 Nissan Patrol aftermarket audio stereo navigation system with bluetooth 3G WIFI.
2012 Nissan Patrol aftermarket audio stereo navigation system with bluetooth 3G WIFI
Before installation,you must ensure that this unit is suitable for your car and then go on following behind actions.If you are not sure,you can ask someone who works in the market or workers on the website,for example:http://www.seicane.com/radio-replacement-aftermarket-oem-gps-car-a-v-system-for-2012-nissan-patrol-with-3g-wifi-dvr-bluetooth-music-dvd-recoding-function-support-c154.And if this is doesn’t fit yours,maybe you can find another suitable one there.
Here are some preparation works,include disconnect negative power cable,park your car well and turn off original radio and other car series to ensure security.
2012 Nissan Patrol original audio system removal:
1.This is original car stereo
original car stereo
2.Use a lever to pry top trim panel and remove it gently,then you can put it on the right side
Use a lever to pry top trim panel and remove it gently
3.Make out the screw with a screwdriver,then we come to below part
Make out the screw
4.Make the lowest panel a little off the unit,then pry higher bigger panel with a lever
Make the lowest panel a little off the unit,then pry higher bigger panel with a lever
5.Make this whole panel off,lay it conversely on your legs
Make this whole panel off
6.Make these 2 screws off with a screwdriver,and 2 screws under them
Make these 2 screws off with a screwdriver
and 2 screws under them
7.Then you can remove factory stereo,turn it over and unplug the right cable as the picture show and remove the other two with a removal tool
remove factory stereo,turn it over and unplug the right cable
remove the other two with a removal tool
Precautions during audio removal:
1.Please be gentle and careful to removed objects to avoid any damage
2.Put screws on available places after you have removed them,for you will use them to firm stereo and other systems at later time
3.Have a check to the new unit to see whether your new bought stereo can be installed in after you have removed original one
2012 Nissan Patrol navigation system installation:
8.Firstly,you should figure out how to connect antennas by carefully reading instructions and behave it according to it.And you’d better have a check after that if you are not very sure for it matters a lot
9.After that,install new radio into right space and then turn on it to see if everything is right
10.At last,when you have succeed finishing above steps,then install screws back on new unit to fix it,make removed trim panels back to primary positions
You can do your Nissan Patrol navigation installation with the help of above instructions,and main principles of it is same to many other car stereo installation.So you can also apply it to yours though you are not a owner of Nissan Patrol.
I am sure that you will benefit a lot from some new functions,such as GPS navigation system,HD touch screen and it also support all TV systems.But still notice that you can enjoy them under the condition that you are driving safely.