New unit after installation,gps radio of 2012 Toyota Hilux
With more and more people start to equip their car with DVD player gps navigation system, you may heartbeat by this in order to keep up with the trend,this is just the society phenomenon in the modern life. So,when you have the desire to buy a fashionable car DVD player,you go to the exact shop and see various kind of DVD navigation and feel confused because you are not familiar with those products at all.Therefore, before you go to the shop, it’s very necessary for you to do some searching work. If you are the owner of 2012 Toyota Hilux,you wil see installation guide for 2012 Toyota Hilux DVD player in the next part. The removal part actually is the main also important part of the installation process.
The next is the 9 detailed steps for it.
1.Turn off the switches as the picture show and get out three small covers
2.Remove the screw which is in the middle
3.Push it in a little on the left and right side
4.Get out the dashboard of the radio
5.Make the cable unconnected and remove the two screws with a screwdriver
6.The dashboard after removal as the picture show
7.Fasten four screws which has two on each side
8.Take out the CD player after four long screws has been removed
9.Make the CD player unconnected with the original part
If you have finished removing the original CD player successfully with the help of below guidance,you can have a comparison between your removed one with the picture show,to see whether you have totally carried out necessary things.If the answer is yes,then I can say you have done the most important job of the installation staff.
As for the next steps about installing Toyota Hilux dvd player for the car,you can look for some applied information from websites such as http://www.seicane.com/all-in-one-2012-toyota-hilux-dvd-gps-audio-system-radio-rds-tv-tuner-bluetooth-music-3g-wifi-ipod-1080p-auto-a-v-in-out-dvr-aux-pop-backup-camera-usb-sd-c143 ,it may provide you more detailed information about the new radio including ways on how to operate it.
In fact most installation process are same in a large proportion,they surely have some difference during your work,but don’t worry,this is normal and you will solve it well only if you make adequate preparation before you start up your removal.