422 views

How to upgrade a 2007 -2010 Ford Mondeo head unit with Radio GPS navigation system HD touch screen Bluetooth Rear view camera TV 3G WIFI Quad-core CPU 16G Flash

Now more and more car owners replace their factory radio with a new head unit which can bring them much convenience and enjoyment on the way. Some of them even successfully achieve the installation on their own. If you have some related experience, you can also have a try under the guidance of a correct guide. The below is the 2007-2010 Ford Mondeo head unit installation instruction from Seicane. Wish it can be helpful for you.

2007-2010 Ford Mondeo head unit after installation

2007-2010 Ford Mondeo head unit after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007-2010 Ford Mondeo head unit installation guide

1. Remove the panel with a lever.

Remove the panel with a lever

Remove the panel with a lever

2. Unscrew four screws holding the original radio with a  screwdriver.

Unscrew four screws holding the original radio with a screwdriver

Unscrew four screws holding the original radio with a screwdriver

3. Gently take the original car radio out of the dashboard.

Gently take the original car radio out of the dashboard

Gently take the original car radio out of the dashboard

4. Disconnect all connectors at the back of the original car radio.

5. Check all the accessories for the new Seicane head unit.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane head unit.

Connect the Seicane car radio to your original car radio 's plugs

Connect the Seicane car radio to your original car radio ‘s plugs

7. Connect the Seicane head unit to your original car radio ‘s plugs.

8. Turn on the new Seicane unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9.Put the new Seicane unit into the dash.

10. Put everything into their original place.

Wish the 2007-2010 Ford Mondeo head unit installation above can be helpful you. If you have any question, it’s suggested you turn to your dealer for help. If you don’t have any experience on the installation, you’d better have it installed by a professional. Besides, you need to confirm your new stereo can be suitable for your car. To check the compatibility, you are welcome to click the link below which is about a top 2007-2010 Ford Mondeo head unit from Seicane.

http://www.seicane.com/hot-selling-android-car-dvd-player-for-2007-2010-ford-mondeo-with-radio-gps-navigation-system-hd-touch-screen-obd-dvr-usb-sd-bluetooth-rear-view-camera-tv-3g-wifi-mirror-link-ipod-s167017

This popular 2007-2010 Ford Mondeo head unit comes with the latest GPS navigation system for you to find your best way to your desired destination with its turn-by-turn direction as well as voice prompts. It supports dual-zone function which allows you to enjoy your favorite music when you are navigating to your destination. Wish you have a great time with it!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>