When the idea to upgrade your factory radio comes up to your mind, you may think the upgrading process is hard to achieve. However, actually it is not difficult for you to upgrade your factory radio by installing a new multifunctional car stereo which demands you of some related experience and a correct installation instruction. The following is an easy-to-understand installation instruction for a 2017 TOYOTA Corolla (RHD) Bluetooth Head Unit. If you have the same dashboard, you can refer to the instruction. Wish it can bring some help for you.
Tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2017 TOYOTA Corolla (RHD) car stereo installation instruction
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Wish the above installation instruction can be helpful for you. If there is any question, you can contact with your dealer for a wiring diagram and seek help from a professional. Before the installation, you need to check whether your new car stereo is compatible with your beloved car or not. If not, I’d like to recommend a great Seicane 2017 TOYOTA Corolla (RHD) Bluetooth Head Unit to you. For more details, please click:
Upgraded to the most advanced Android 5.0.1 operation system and equipped with a powerful Quad-core CPU, you are able to enjoy a smoother and more stable performance than before. The 3D GPS navigation system is specially built in for you to easily find your way with the turn-by-turn guidance and voice prompts. And the built-in Bluetooth which enables to pair with your Bluetooth cell phone largely keeps you a safe and delightful driving. Besides, the additional entertainment features are also supported to add a ton of fun to your long trips. Don’t forget to add this 2017 TOYOTA Corolla (RHD) Bluetooth Head Unit to your cart if you like it!