Some car owners may think it difficult to install a new head unit. In fact, if you have some related experience and a correct installation guide, you can also easily achieve the installation on your own. Now I’d like to share a step-by-step Nissan Universal head unit installation guide with you. If you own a Nissan Universal head unit and have the same dashboard as the picture below, you can take it as a reference.
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
Nissan Universal head unit installation guide
Step 1: Use a screwdriver to remove two screws above the original car radio.
Step 2: Remove the trim panel.
Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.
Step 3: Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.
Step 4: Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.
Step 5: Check all the accessories for the new Seicane head unit.
Step 6. Connect the harnesses to the back of the new Seicane head unit.
Step 7. Connect the Seicane head unit to your original car radio ‘s plugs.
Step 8: Turn on the new Seicane head unit to have a careful check if it works well with your car. If it doesn’t, please check whether all the cables are connected correctly.
Step 9: After the test, please put the new Seicane head unit into the dash.
Step 10: Install all the screws and the trim panel into their orig
The step-by-stepinstallation guide for a Nissan Universal head unit is shown as the above. Wish you can get some help from it. If there is any question, you can consult your dealer. However, if you can’t finish it on your own, you’d better ask a professional for help. If you are still looking for an ideal car stereo for your car, you can refer to this amazing Nissan Universal head unitfrom Seicane. Please click for more details:
This modern Nissan Universal head unit comes with a large amount of features such as built-in GPS navigation system, Bluetooth hands-free calls, Bluetooth streaming music, DVD, CD, FM/AM radio tuners, Ipod, etc. You can install this aftermarket car stereo in the dash of your vehicle to navigate as well as enjoy your favorite music while you are driving. With you have a wonderful time with this amazing Nissan Universal head unit on all your trips!