Look at the picture below, it is a 2008-2012 KIA CERATO(MT) car stereo from Seicane after installation. Don’t you think it looks very great? If you often spend a lot of time on driving, you will easily get bored and tired during a long journey. While at that time, an amazing car stereo can help you eliminate fatigue and relax yourself. If you own a 2008-2012 KIA CERATO(MT) and want to know how to install a high-end car stereo by yourself, you can follow the guide below for installation details.
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4. Please prepare a lever and a screwdriver before the removal and the installation.
5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2008-2012 KIA CERATO (MT) car stereo installation steps
1. The original car radio.
2. Pry the left air conditioner vent with a lever, and then remove it.
3. Pry the right air conditioner vent with a lever, and then remove it.
4. Unscrew four screws under the a/c vent holding the original car radio with a screwdriver.
5. Gently take the original car radio out of the dash.
6. Disconnect all connectors at the back of the original car radio.
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original car radio ‘s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
That’s all the installation steps on how to install a 2008-2012 KIA CERATO (MT) car stereo. It is not strange if your dashboard is not the same as that pictures show above for different cars in different manufacture years come with different dashboards. But the overall installation principle is the same. If you have any questions, you can ask for your dealer or a professional for help. In addition, it is vital for you to have a suitable car stereo firstly, if you are still searching for it, I’d like to introduce a 2008-2012 KIA CERATO (MT) car stereo from Seicane to you.
This intelligent car stereo runs faster and has a better performance than ever as it upgraded to the latest Android 5.1.1 operating system and with the configuration of RK3188 1.6 GHz Cortex A9 quad-core processor. You won’t get lost when you travel around a unfamiliar place with the accurate directions and spoken guidance provided by its GPS navigation system. Besides, additional entertainment features will add a lot of joyfulness to your journey. Wish you like it!