To save some money on the upgrade of a new car stereo, some car owners may want to install the new stereo on their own. If you don’t install a stereo before, then a detailed installation guide can be much helpful for you. Here I’d like to share a step-by-step 2002 2003 Dodge RAM VAN (Fullsize) head unit installation guide from Seicane with you. You can read it carefully before you start your work.
2002 2003 Dodge RAM VAN (Fullsize) head unit after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4. Please prepare a lever and a screwdriver before the removal and the installation.
5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2002 2003 Dodge RAM VAN (Fullsize) head unitinstallation steps
1.Loosen the trim panel with a lever.
Loosen the trim panel with a lever
2.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car
2-2.Take the panel off the dash and disconnect the wires from the car
3.Remove the four screws which are holding the unit with a screwdriver.
Remove the four screws which are holding the unit with a screwdriver
4.Take out the unit and disconnect the wire harness at the back of the unit.
4-1.Take out the unit and disconnect the wire harness at the back of the unit
4-2.Take out the unit and disconnect the wire harness at the back of the unit
5.Check all the accessories for the new Seicane head unit.
Check all the accessories for the new Seicane car radio
6. Connect the harnesses to the back of the new Seicane head unit.
Connect the harnesses to the back of the new Seicane car radio
7. Connect the Seicane head unit to your original car radio ‘s plugs.
7-1. Connect the Seicane car stereo to your original car radio ‘s plugs
7-2. Connect the Seicane car stereo to your original car radio ‘s plugs
8.Put the new Seicane head unit into the dash.
9.Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10.Put trim panel back on your new Seicane head unit after the normal test.
In a word, you need to make clear about every step before you start to install this 2002 2003 Dodge RAM VAN (Fullsize) head unit in your car. If there is any question, you can seek help from your dealer. If you don’t have any experience on the installation, it’s strongly suggested you ask a professional to install your new unit. If you are still looking for a suitable head unit for your car, I’d like to recommend an amazing 2002 2003 Dodge RAM VAN (Fullsize) head unit from Seicane to you. Please click for more details:
With this intelligent Dodge RAM VAN (Fullsize) head unit which is loaded with an advanced WinCE 6.0 system to smooth the operation as well as facilitate the performance. You can easily get to your destination with the help of the precise 3D GPS navigation system which can provide landmark display, lane assist, text-to-speech guidance and voice prompts for you. Good luck to you!