Last week, I got the new surprise in my life as my uncle buy a new car stereo which is just suitable for my new Chevrolet car. I have nice day when I first got this new gift and can’t wait to replace it on my car. The sound bar is perfect and after I finish the process, all of the function have stable and good performance, which increase much joy to my later in-car life. In order to share these good news to those who doesn’t have idea about how to replace their new Chevrolet Android unit, I wrote this article to help you to solve your problems. Hope it can give you advice in some extent.
Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.
2012 2013 2014 Chevrolet S10 stereo removal
1.Gently lever the upper trim housing panel from the dash with a removal tool.
2.Lever edges of side panel,release and reposition the shifter.
3.Make out 2 screws(this screw and the other corresponding one) from the storage pocket,remove car storage.
4.Make out 4 screws which are on the accessory control panel.
5.When you remove this very tough panel you should be patient and the clips will loosen.,then let panel hang to side.
6.Make out 2 screws from radio control panel,unplug the radio control panel.
7.Take out the really strange blue clip absolutely before removing the other connector,and remove the latter one.
8.Get out 2 screws which are on the radio chassis,and remove the other 2 screws which are near the top of the stereo,in order to fasten the screen.
9.Make screen out by pulling,and get behind clip out.
10.There are still 2 screws on stereo,remove them from car head unit.
11.Take stereo and connectors out.
12.Read installation instructions that within you new bought stereo,precisely make cables connection between new stereo with car.
13.After correct connection,install your new unit into your car and turn on it to test whether your actions are all right.
13.Fix 2 screws to the stereo and install the dvd player in position.
14.Make 2 screws back to the place near top of the stereo,and 2 screws to radio chassis.
15.Make other parts back to original place and don’t forget to firm their screws back to them to fix corresponding machine.
These are the whole process about installation and I believe you could finish it as long as you follow these steps carefully. For those who still have problems during the procedure, I would like to share a link of Chevrolet Android unit from Seicane, where there are supply of tutorials and car accessories on its official website,you can also ask for the assistance via e-mail or phone as you like.
Hope you have good day and get what you want here!