160 views

How to Remove and Upgrade a 2006 2007 2008 2009-2012 BMW E90 E91 E92 E93 GPS Sat Nav USB WIFI Audio Car Radio

As for most of car owners, among a lot of ways to take your in-car life up a level, one of the most effective ways is to remove the factory radio and install a new aftermarket car radio. With a multifunctional car radio installed in your car, you will be provided with the best services since this car radio comes with a wide range of practical and entertainment features. The following is a 2006 2007 2008 2009-2012 BMW E90 E91 E92 E93 car radio installation instruction which can be taken as your reference.

2006 2007 2008 2009-2012 BMW E90 E91 E92 E93 car radio after installation

2006 2007 2008 2009-2012 BMW E90 E91 E92 E93 car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2006 2007 2008 2009-2012 BMW E90 E91 E92 E93 car radio installation instruction

1. The original dashboard.

The original dashboard

The original dashboard

2. Use the auxiliary drawing to mark.

Use the auxiliary drawing to mark

Use the auxiliary drawing to mark

2-1

2-1

3. Use a knife to cut the panel along with the red line.

Use a knife to cut the panel along with the red line

Use a knife to cut the panel along with the red line

4. After cutting the panel, remove this panel.

After cutting the panel, remove this panel

After cutting the panel, remove this panel

5. Remove the auxiliary drawing.

Remove the auxiliary drawing

Remove the auxiliary drawing

6. Add a bracket to the back of the display screen.

Add a bracket to the back of the display screen

Add a bracket to the back of the display screen

7. Make sure the connectors or cables are connected correctly and then put the display screen to this position.

Make sure the connectors or cables are connected correctly and then put the display screen to this position

Make sure the connectors or cables are connected correctly and then put the display screen to this position

8. Display screen after installation.

Display screen after installation

Display screen after installation

9. Use a plastic removal tool to pry loose the air-conditioning panel.

Use a plastic removal tool to pry loose the air-conditioning panel

Use a plastic removal tool to pry loose the air-conditioning panel

10. Remove the air-conditioning panel and then unplug the connectors or plugs at the back of it.

Remove the air-conditioning panel and then unplug the connectors or plugs at the back of it

Remove the air-conditioning panel and then unplug the connectors or plugs at the back of it

11. Use a screwdriver to remove the screws that fix the original car radio.

Use a screwdriver to remove the screws that fix the original car radio

Use a screwdriver to remove the screws that fix the original car radio

12. Pull out the original car radio and disconnect the connector and plugs behind the radio.

Pull out the original car radio and disconnect the connector and plugs behind the radio

Pull out the original car radio and disconnect the connector and plugs behind the radio

13. Check all the accessories for the new Seicane car radio.

14. Connect the harnesses to the back of the new Seicane car radio.

15. Connect the Seicane car radio to your original radio’s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash.

18. Put everything into their original place. All the installation is done.

 

Wish the above installation steps can be helpful for you. If you have any problems that you don’t know how to deal with, you can contact your dealer, communicate with someone experienced or turn to a professional technician. And additionally, for avoiding damage to either your car radio and your car, you can directly arrange a professional technician to help you install the new car radio. And before installation, it is essential for you to select an ideal car radio before installation. If you have no ideas, here I would like to share a remarkable 2006 2007 2008 2009-2012 BMW E90 E91 E92 E93 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-bmw-e90-3-series-saloon-head-unit-dvd-player-gps-navigation-system-with-3g-wifi-radio-bluetooth-sia-9203

There is no denying that your driving experienced will be taken up a notch with this car radio installed in your car.

With the assistance of the worldwide real-time GPS navigation system, you can easily locate where you are currently and accurately navigate to any locations you would like to go to according to the turn-by-turn directions and voice prompts. And this unit comes with dual zone function which enables you to listen to your favorite music while navigating.

Besides, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, without taking your hands-free phone calls off the steering wheel for a long time,you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to your favorite music streaming from your phone music playlists.

What are you waiting for? If you like this unit, just add it to your shopping cart.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>