After you get an ideal car radio of high configuration, have you ever considered installing it for your car independently? Perhaps you think the installation too hard and worry that you cannot finish the whole installation successfully. But it is not impossible if you install this car radio under a detailed installation guide. Here comes an easy-to-understand installation guide for a 2004 2005 2006 2007 Mercedes Benz C class W203 C180 C200 C220 C230 C240 car radio, if you have the same vehicle type, you can refer to the following guide to help with your installation in the future.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2004 2005 2006 2007 Mercedes Benz C class W203 C180 C200 C220 C230 C240 car radio installation guide
1. The original car radio.
2. Use a special plastic tool to remove the trim bazel.
4. Remove 2 hidden screws with a screwdriver below the vent.
5. Push down the vent and loose it.
6. Remove the trim panel with a plastic removal tool.
7. Remove 2 screws that are holding the car radio.
8. Take out the original car radio.
9. Unplug the connectors and cables at the back of the radio.
10. Check all the accessories for the new Seicane car radio.
11. Connect the harnesses to the back of the new Seicane car radio.
12. Connect the Seicane car radio to your original radio’s plugs.
13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
14. Put the new Seicane car radio into the dash.
15. Put everything into their original place. All the installation is done.
Wish the above installation guide can be helpful for your installation. If you are not very clear about every step before installation, it is suggested that you should consult your dealer, communicate with someone experienced or turn to a professional for help. What’s more, it is necessary for you to confirm that you have an ideal car radio for your car. If you find your new car radio is not compatible enough, I’d like to recommend a great 2004 2005 2006 2007 Mercedes Benz C class W203 C180 C200 C220 C230 C240 car radio from Seicane to you. For more details, please click:
This car radio is loaded with the latest Android 7.1.1 operation system and a high-quality quad-core CPU processor to enhance its capabilities and performance, so it can be regarded as one of your best choices to replace your factory radio.
Even you have no good sense of direction, you won’t get lost when you travel around an unfamiliar place thanks to the latest advanced built-in GPS navigation system in high accuracy. Through turn-by-turn direction and voice prompts, you can know you current locations and navigate to your desired destinations. And while navigating, you can freely listen to your favorite music thanks to this unit’s dual zone function.
Without taking your hands off the steering wheel, you can dial, answer, reject and mute hands-free calls as well as enjoy your favorite music streaming from your phone music playlists with the synchronization between your Bluetooth-enabled mobile phone and this car radio under the wireless Bluetooth technology.
Wish you enjoy your every driving experience with this remarkable car radio installed in you car.