Suppose that you have a self-driving tour, do you want to enjoy your favorite music or watch a fantastic movie to add fun to your long driving time in car? If your answer is “yes”, then it is high time for you to consider replacing your factory radio with an intelligent car radio with comprehensive features. An installation guide for a 1996-2009 Toyota Prado Dashboard Car Radio is as follows. If you have the same dashboard, you can read it carefully to get some inspiration.
Tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
1996-2009 Toyota Prado car radio installation guide
1. The original car radio.
2. Adjust the shifter lever.
3. Use the plastic removal tool to remove the panel and unplug the connector behind.
4. Grab the center nob, remove it and use a screwdriver to unscrew the hidden screw.
5. Remove the panel with a plastic removal tool, then unplug the connectors at the back of it.
6. Remove screws that are holding the radio.
7. Release the clips and take out the original car radio.
8. Disconnect connectors and cables at the back of the radio.
9. Check all the accessories for the new Seicane car stereo.
10. Connect the harnesses to the back of the new Seicane car stereo.
11. Connect the Seicane car stereo to your original stereo’s plugs.
12. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
13. Put the new Seicane car stereo into the dash.
14. Put everything into their original place. All the installation is done.
Above is the installation guide for a 1996-2009 Toyota Prado Dashboard Car Radio. If you have any questions, it is highly suggested that you should ask your dealer or a professional for help. Or you can ask someone experienced to help you alongside. To make sure you can replace the car radio successfully, you have to confirm that your new car radio is compatible with your car. If not, I’d like to recommend a wonderful 1996-2009 Toyota Prado Dashboard Car Radio from Seicane to you.
This remarkable 1996-2009 Toyota Pradocar radio can be the one of the best replacements for your old factory radio. Equipped with the built-in worldwide real-time GPS navigation, you can go anywhere with the help of lane assist, landmark display, route planning, turn-by-turn direction and voice prompts. Under the Bluetooth technology, you can sync with your Bluetooth-enabled cell phone for hands-free calls and music streaming. Therefore, you can always have a safe, convenient and joyful trip. Besides, because of the Wifi module and 3G internet, you can freely surf the internet in car. Wish you like it!