1,145 views

How to Remove a 2007-2010 Jeep Wrangler Unlimited Radio

 

Jeep Wrangler Unlimited radio

Jeep Wrangler Unlimited radio

Remove an original radio in Jeep Wrangler Unlimited is a little complicated. The most complicated part would be removing the trim panel. But if you know every step well, it would be simple. The following are removal steps for a Jeep Wrangler Unlimited radio for your reference. However, you are not recommended to remove your car radio yourself if you are a green hand.

 

Please prepare a lever and a screwdriver for the removal. Please remove the negative cable on the vehicle battery to ensure security.

 

  1. Remove the top part of the trim panel. Insert a lever into the gaps between the top part of the trim panel and the dashboard. Pry for several times. Then, you can remove the top part of the trim panel from the dashboard. Before taking it off, disconnect the wires on the panel.  Wrangler
  2. Remove the bottom part of the trim panel. Insert a lever into the gap between the bottom part of the trim panel and the main part of the trim panel. Pry from one side to the other side. Then, you can take the bottom part of the trim panel off the dashboard.                                 暴风截图20152523458359
  3. Remove the main part of the trim panel. There are four screws at the four corners of the main part of the trim panel. Remove them with a screwdriver and put them away. Then, use a lever to pry the gaps between the trim panel and the dashboard and take the trim panel off the dashboard gently. Please keep all the accessories well.        暴风截图20152523472187 暴风截图20152523488765 暴风截图20152523586546
  4. Remove the radio. Unscrew the screws on the radio and take the radio out of the dash. There are wires at the back of it. Disconnect them and put the radio aside.                                                                 暴风截图20152523694156

Now, we have removed a Jeep Wrangler Unlimited radio. Next, you should install a new unit in the car. Refer to the installation instruction and connect the new unit to the original wiring harness. Then, test the new unit.

 

The wires connections and installation of antennas should be correct so that all the functions can work well in the car. If you have any questions during installation, please contact the dealer for help. If everything’s good, you can install the trim panel back to its original place now.

 

If you haven’t found a suitable aftermarket for your car, I would like to share a good Jeep Wrangler Unlimited radio with you. It has many great functions, such as, GPS navigation system, radio, Bluetooth and so on. Let’s check out: http://www.seicane.com/2007-2008-2009-2010-jeep-wrangler-unlimited-dvd-bluetooth-stereo-replacement-hd-touch-screen-3d-navigation-radio-tuner-tv-pop-1080p-c202

 

GPS navigation
Frequency 1575.42MHZ C/A CODE
Protocol standard NMEA-0183 V3.01
Channel number 66 channel for searching satellite 22 channel for tracking
Tracking sense -164dBm
Locate 3m 2D RMS
Dual zone Yes
3-zone POP Yes
Support map Tomtom IGO Route 66 Papago etc
Voice navigation Yes

 

It can currently fit to 2007 2008 2009 2010 Jeep Wrangler Unlimited and work with your car perfectly. You can not only operate the system from the panel buttons, HD touch screen, remote control but also via your original car’s steering wheel controls.

 

It has 20 disks virtual CD changer and supports downloading from CD or DVD to the head unit. You don’t need to keep too many discs in your car anymore.

 

It has high sensitive FM/AM Radio receiving mode. It supports RDS, TA, AF, ST and so on. You can select channels manually or automatically.

 

It has Built-in BT 2.0 for phone book, hand free, music, call history and so on. It supports steering wheel control buttons, too. You can answer calls with your hands on the steering wheel directly.

 

It can do more for you. Check it out and get discount now: http://www.seicane.com/2007-2008-2009-2010-jeep-wrangler-unlimited-dvd-bluetooth-stereo-replacement-hd-touch-screen-3d-navigation-radio-tuner-tv-pop-1080p-c202

 

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>