We know that cars of Jeep series are always very domineering on its appearance,of course its stereos also need to be match it.If you are a owner of 2008 2009 2010 Jeep Commander,you can have a look at this picture,it’s new unit after installation,dvd gps navigation bluetooth of 2008 2009 2010 Jeep Commander.
It looks not bad when it has been replaced in your car,so you may be curious about how to remove 2008 2009 2010 Jeep Commander cd player with audio system if you want to do it yourself.
Exterior of this dvd player belongs to normal standard,its design makes it not only suitable for Jeep Commander of 2008 2009 2010,but also for many other cars,and yours may be one of it.You can figure out answer by making a comparson between the panel of your original CD player with this one’s,If they look same,it means that it can be installed in your car.
Actually removing stereo procedure is alike in most parts,therefore though it looks not suitable for your car,you can also read this article and get to know roughly installation process,which will surely benefit you anyway.Maybe you can also help your friend to finish this work.
In order to get a better understanding of operating this new stereo, here is a video which is suitable for you to view:
Precautions before installation:
1.Please turn off your car series include the radio unit and park your car well
2.Before you begin any work,remember to disconnect negative power cable to avoid danger
3.Before connecting,please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last
2008 2009 2010 Jeep Commander cd player removal installation:
1.Original car stereo of Jeep Commander
2.Use a pry tool to lever the trim panel to release it
3.Get trim panel out and disconnect cables behind panel
4.Take 4 screws down with a screw removal tool,each side has 2 screws
5.Gently take factory stereo out and disconnect cables at the back of it
Operations for CD player removing is over here,and next we will learn how to install new head unit into the car.
2008 2009 2010 Jeep Commander gps dvd installation:
6.Please connecting cables step by step as next images show
7.Then install new radio in right space,have a tidy for the wires because the space is limited
When you have finished Jeep Commander cd player removal and new dvd installation, you can turn on installed stereo first and see whether all wires are connected correctly.If not,the screen of the unit won’t work and you need to take out the unit and connect cables again.
And if the new stereo operates well,it shows that you have done it right and you can continue things after it.At that time you have owned a car with new radio and may be so excited that can’t wait to enjoy it.
But I have doubts about if you are familiar with its functions,and I suggest you to search for some detailed information to help you enjoy this new machine better.For example,this website may help you get it: http://www.seicane.com/hot-2008-2009-2010-jeep-commander-dvd-gps-car-stereo-3g-wifi-radio-rds-tv-bluetooth-mp3-ipod-iphone-aux-pop-rearview-camera-c202 .