253 views

How to install and replace a 2013 2014 2015 2016 KIA K3 Audio Bluetooth USB WIFI Car GPS Navigation Radio

If you are looking forward enjoying the greatest convenience in your car as well as have the most fun while driving, you can consider installing a new multifunctional car radio to improve your in-car environment and take your driving experience up a notch. The following is a 2013 2014 2015 2016 KIA K3 car radio installation instruction from Seicane. If you have the same or similar dashboard, you can take this guide as a reference.

2013 2014 2015 2016 KIA K3 Car Radio after installation

2013 2014 2015 2016 KIA K3 Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2013 2014 2015 2016 KIA K3 car radio installation instruction

1. Use a plastic removal tool to pry the panel below the AC control and remove the panel.

Use a plastic removal tool to pry the panel below the AC control and remove the panel

Use a plastic removal tool to pry the panel below the AC control and remove the panel

1-1

1-1

2. There is one screw on the left bottom, remove it with a screwdriver.

There is one screw on the left bottom, remove it with a screwdriver

There is one screw on the left bottom, remove it with a screwdriver

2-1

2-1

3. Remove the radio trim panel with the plastic removal tool and then unplug the connector at the back of it.

Remove the radio trim panel with the plastic removal tool and then unplug the connector at the back of it

Remove the radio trim panel with the plastic removal tool and then unplug the connector at the back of it

3-1

3-1

3-2

3-2

4. Unscrew the screws that are holding the radio on the dashboard.

Unscrew the screws that are holding the radio on the dashboard

Unscrew the screws that are holding the radio on the dashboard

5. Softly pull out the original car radio.

Softly pull out the original car radio

Softly pull out the original car radio

6. Disconnect connectors and cables at the back of the radio.

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Don’t be worried if you encounter any difficulties and don’t know how to deal with. To fix these problems, you can contact your dealer or seek help from a professional. Or you can straightly go to a car radio upgrade center and ask a professional technician to help you install the new car radio. As for the selection of an ideal car radio, if you don’t know which kind of car radio can fit your car, you can refer to the following link which is a remarkable 2013 2014 2015 2016 KIA K3 car radio from Seicane. For more details, please click:

https://www.seicane.com/inch-all-in-one-android-gps-navigation-system-for-2013-2014-2015-kia-k3-with-touch-screen-tpms-dvr-obd-ii-rear-camera-aux-usb-sd-steering-wheel-control-3g-wifi-video-radio-bluetooth-s083988

This remarkable car radio is loaded with the intelligent Android 6.1 operations system and a powerful quad-core CPU processor, which can greatly enhance its capabilities and improve performance.

With this car radio in your car, a lot of practical and entertainment features are available for you, which mainly include 3D GPS navigation, Bluetooth hands-free calls, Bluetooth streaming music, FM/AM radio tuner, file management, AUX, steering wheel control, etc.

Under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you can easily locate where you are and navigate to any locations you would like to go to. And you can also enjoy your favorite music while navigating thanks to this unit’s dual zone function.

Additionally, this unit’s built-in GPS navigation system enables you to dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music without taking your hands off the steering wheel as long as you connect your Bluetooth-enabled mobile phone to this car radio.

Wish you enjoy your trip and have a great time with this remarkable car radio. Good luck to you!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>