2,872 views

How to install 2009 2010 2011 2012 Chevrolet Cruze GPS radio dvd player with bluetooth

At the beginning of this article,I have a picture to show you:autoradio after installation,aftermarket gps radio with bluetooth music of 2009 2010 2011 2012 Chevrolet Cruze.If your trim panel of factory radio looks like this one,then it also can match your car.

autoradio after installation,aftermarket gps radio with bluetooth music of 2009 2010 2011 2012 Chevrolet Cruze

autoradio after installation,aftermarket gps radio with bluetooth music of 2009 2010 2011 2012 Chevrolet Cruze

Suppose you are a owner of 2009 2010 2011 2012 Chevrolet Cruze and you are interested in upgrading its stereo,in that way I hope that this article which is about how to install 2009 2010 2011 2012 Chevrolet Cruze GPS radio dvd player with bluetooth will help you solve some basic problems and can be a guide for your installation.

Here is a video which is about usage of new features of this new unit,there is general introduction on operating it and you can have a clear watch at its screen and functions.You can then  make the decision whether to upgrade the car radio.

If you are sure that this unit can be installed in your car and have the desire to install a Chevrolet Cruze GPS radio for your car,you can have a look at the next installation procedure which is easy to grasp and understand.

2009 2010 2011 2012 Chevrolet Cruze head unit removal and installation:

1.With a removal tool for panel,pry the upper vent housing panel from the dash gently

With a removal tool for panel,pry the upper vent housing panel from the dash gently

With a removal tool for panel,pry the upper vent housing panel from the dash gently

2.Lever the shifter surround panel which is on manual transmission,fasten and reposition the shifter

Lever the shifter surround panel which is on manual transmission,fasten and reposition the shifter

Lever the shifter surround panel which is on manual transmission,fasten and reposition the shifter

3.Make 2 screws out of the storage pocket,then make storage out

Make 2 screws out of the storage pocket

Make 2 screws out of the storage pocket

make storage out

make storage out

4.Make 4 screws out of the control panel

make this screw and the other corresponding one out

make this screw and the other corresponding one out

make this lower screw and the other corresponding one out

make this lower screw and the other corresponding one out

5.Be patient to pull out this panel,for it’s very tough to remove,release the clips to let panel hang to side

Be patient to pull out this panel

Be patient to pull out this panel

6.Make 2 screws out of radio control panel, disconnect it

Make 2 screws out of radio control panel, disconnect it

Make 2 screws out of radio control panel, disconnect it

7.Here is a blue clip which is really strange,you should remove the blue clip totally before removing the real connector,then remove the other clip

remove the blue clip totally before removing the real connector

remove the blue clip totally before removing the real connector

8.Make 2 screws out of radio chassis,and 2 screws near the top of the radio in order to loosen the screen

Make 2 screws out of radio chassis

Make 2 screws out of radio chassis

and 2 screws near the top of the radio in order to loosen the screen

and 2 screws near the top of the radio in order to loosen the screen

9.Pulling out screen and remove it,remove clip behind it

Pulling out screen and remove it

Pulling out screen and remove it

10.Make 2 more screws on stereo out

Make 2 more screws on stereo out

Make 2 more screws on stereo out

11.Take stereo out and disconnect behind connectors

Take stereo out and disconnect behind connectors

Take stereo out and disconnect behind connectors

Removing original stereo has been finished and the next work is to install the new stereo to car:

12.If you don’t know how to connect wirings,please take installation instructions you have from shop as references,correactly connect all cables of new stereo to car’

13.Firm 2 removed screws to the radio and install the new head unit in right space

14.Twist the 2 screws to radio chassis,and the other 2 screws which were near top of the stereo

15.Make storage pocket,accessorv control panel and radio control panel back to their original place and remember to twist their screws back to them,to ensure secured

At last,there are some notes for you which is about Chevrolet Cruze radio’s usage and maintain.

Precautions about usage and maintain of new unit:

1.Please do not be too excited after installation,be careful when you are driving and do not stare at the new unit,it’s very dangerous

2.If you hope new radio can be used longer,please do not spill any liquid on it and keep touch screen as clean as possible

3.When driving on raining days with high humidity,you should pay more attention to the radio because moisture may gather on your new unit and will probably lead to DVD’s abnormal work

 

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>