Here is an image for car stereo autoradio after replacement, aftermarket sat nav system with touch screen of 2008 2009 2010 2011 Jeep Grand Cherokee.If you have a car of this kind,you may be more curious about its conditions.
So have you thought about this question:how to install 2008 2009 2010 2011 Jeep Grand Cherokee aftermarket sat nav system?Many people hold that there is no need to do it himself and it’s of course professional person’s staff.However there are also a large number of people have carried it out themselves.Whatever,learning more about it can not be a bad thing and acknowledging this can also help you understand better of your car.I heard that most car owners are car investigators.
There are some notes for you to pay attention to before your begin your installation.
Precautions before removal and installation:
1.Please finish all parking affairs of car to make sure security during next procedure
2.Remember unplug negative battery cable before removal,or it can be very dangerous
3.You’d better find a person to help you for the space of car is limited and solve problems more easily
Now we go to learn about how to remove original CD radio and install Jeep Grand Cherokee aftermarket sat nav system.
2008 2009 2010 2011 Jeep Grand Cherokee radio removal:
1.Original dashboard of Jeep Commander
2.Pry the trim panel with a lever to release it
3.Pull out trim panel and disconnect connectors between panel and car
4.Use a screw removal tool to take out 4 screws,and 2 screws on each side
5.Remove factory stereo gently and disconnect cables behind it
Removing factory stereo is finished with above 6 steps,and you will find that it’s simple to do it when you have prepared removal tools and do it as right guide.And there are still about 3 steps to accomplish it.
Firstly,you should connect all wires include antennas,cables and connectors,do it step by step as following pictures show
Secondly, you can gently install the unit into right place,and for the space for stereo and wires is limited therefore you’d better have a tidy for the wiring
You see,actually the most important thing of installation has finished.But I think you need to check it again if you are not very sure about it.Because if you don’t and one of connectors is wrong connection,the stereo won’t work at last and you have to remove the unit and make connections once again,that will waste of time and vigor.
At last,what you should do is turn on stereo and test its functions.If everything is all right,then you can screw those 4 screws and make panel covered on new autoradio.
There is an exact video for you to study how to use new head unit of 2008 2009 2010 2011 Jeep Grand Cherokee,it will show you right use ways of this unit:
For more exact things about this stereo,you can visit some websites to seek what you want,for example:http://www.seicane.com/oem-gps-navigation-stereo-remove-for-2008-2009-2010-2011-jeep-grand-cherokee-with-am-fm-radio-rds-bluetooth-tv-tuner-cd-dvd-player-hd-1080p-c202.
If you are also interested in Jeep Commander radio installation,I have also written an article for it,you can get in the link and have a look at it.