Before we start talk about how to install 2007-2013 Toyota Land Cruiser 200 series aftermarket navigation system with radio 3G WIFI, I would like to let you to see next video and have a general understanding of it first.
Most of you may have the willing to equip your car with the stereo in the video which is very practical.But you should make sure that whether this unit can be installed in your car before at first.
You will make it clear with the help of next picture by comparing the trim panel.And then I will show you detailed installation steps for 2007-2013 Toyota Land Cruiser 200 series navigation system.
Please have a careful look at your trim panel of the original radio and check it whether looks alike this one’s,or you can ask someone who are professional to help you make this judgement.Finding a suitable car stereo is the basis for your installation.
When you have decided to install the more convenient one,you can take the following steps as references.Honestly speaking,all car radios are largely identical but with minor differences.Therefore knowing how to install car audio systems means that you can install a dvd player by yourself.
I have some advices about safety for you before talking about the installation.
Precautions for safety:
When we are using new car dvd radio, remember that safety is the most important.Please do not stare at or even use the stereo while driving, for it will disperse your attention.
When meeting high humidity atmosphere,for example,raining days, it may not work normally as the humidity may gather on screen. In addition, do not sprinkle any liquid on the unit to maintain high playing quality.The following part is about the removal steps for car’s head unit.
2007-2013 Toyota Land Cruiser head unit removal and installation:
1.Remove the two blots off both sides of handbrake
2.Remove screws with your hand
3.Remove left and right loosed dashboard after the bolts are taken off
4.Make the cable between them disconnected
5.Use your hand to take out the screw
6.Get five screws out as the picture show
7.Remove CD player from the unit
8.Gently unplugged the cables behind the player
As for the installation,after you have totally removed factory stereo,connect antennas of new unit to right positions,include cables and connectors.You can do it according to the installation instructions from the dealer.
After that, slip the unit into the dash then plug the negative cable to the original wiring harness as the guide show.If you want to know more information about this car dvd,you can visit some websites for help :http://www.seicane.com/9-inch-car-gps-radio-mount-for-2007-2013-toyota-land-cruiser-200-series-with-bluetooth-music-tv-tuner-cd-dvd-player-aux-3g-wifi-dvr-steering-wheel-control-pop-hd-1080p-c182.
Please mind that all wires should be correctly connected and the same to battery installation.After all these,turn on new radio and operate it with a touch screen pen.
Check out all functions of the unit to see whether your installation process is right. If it doesn’t, check the wires connection again or contact with technicians from the dealer for solutions.