Have you consider changing your factory radio with an up-to-date head unit when you find you find the factory radio is not intelligent enough to be compatible with many modern features. A new aftermarket head unit is integrated with a wide range of practical and entertainment features, which will take your driving experience up a notch. So if you have some interest in installing a head unit, it’s suggested you read this article which is about a 2011-2014 Hyundai HG gps head unit installation guide.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2011-2014 Hyundai HG gps head unit installation guide
1.Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2.Remove screws that fixed the radio on the dashboard.
3.Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4.Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6.Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7.If everything is OK, firm screws into their original place.
8.Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
That’s all about the installation steps to install a 2011-2014 Hyundai HG gps head unit. Please confirm that you are very clear about every detailed step before the installation. If there is something wrong with your installation, you may consult your dealer for valuable suggestions. Or you can seek help from a professional. Whatever you encounter, please check the compatibility between your new head unit with your car. If you have no idea, you can refer to a marvelous 2011-2014 Hyundai HG gps head unit from Seicane. For more details, please click:
The 2011-2014 Hyundai HG gps head unitof high quality with the most up-to-date Android 5.1.1 operation system and the powerful 1.6 GHZ Cortex A9 Quad-core CPU can be one of your best choices to replace your factory radio. There are plenty of entertainment options provided to relax yourself, your families or friends in your car, including playing movies, TV programs, CDs, FM/AM radio, music and so on. Wish you can embrace an excellent driving experience with this intelligent device installed in your beloved car. Good luck to you!