468 views

How to easily replace a 2005-2010 Skoda OCTAVIA III head unit with Radio DVD player GPS navigation Bluetooth TV USB SD 3G WIFI IPOD

If you are looking for the detailed installation guide for the 2005-2010 Skoda OCTAVIA III head unit, this article must be helpful for you. The following part is focus on the procedure of removal and installation. The picture shown below is the Skoda OCTAVIA III head unit from Seicane. If you are the car owner of the Skoda, you can take it as reference.

2005-2010 Skoda OCTAVIA III after installation

2005-2010 Skoda OCTAVIA III after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005-2010 Skoda OCTAVIA III head unit installation guide

1.Remove the trim panel with a lever.

Remove the trim panel with a lever

Remove the trim panel with a lever

2. Remove the panel on the radio with your hands.

Remove the panel on the radio with your hands

Remove the panel on the radio with your hands

3. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

4. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

5. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

6. Check all the accessories for the new Seicane car stereo.

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original car radio ‘s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it

doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place.

That’s all about the installation guide of the 2005-2010 Skoda OCTAVIA III head unit. If you find the picture shown above is different from your dashboard, please rest assured that the guide is much same. Or you can go to the dealer or professionals ask for help. Besides, the ideal new head unit is necessary for your car. If you are looking for one, this is the wonderful 2005-2010 Skoda OCTAVIA III head unit from Seicane and you can refer it.

http://www.seicane.com/android-2005-2010-skoda-octavia-iii-radio-dvd-player-gps-navigation-system-with-bluetooth-hd-touch-screen-obd-dvr-rearview-camera-mirror-link-tv-usb-sd-3g-wifi-ipod-s167032

This multifunctional 2005-2010 Skoda OCTAVIA III head unit designed with a large 7 inch multi-touch screen with 1024*600 HD pixel resolution, you must be surprised at its visually radiant performance and the simpler operation for navigation. The compatibility of USB wired connection and SD card slot enables you to have fun via a wide range of entertainment options, which can greatly entertain both you and your passengers. Wish you like it and have a good time with it!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>