882 views

How to Complete 2013-2014 KIA CERATO in Dash DVD GPS Navigation System Built in WIFI Installation

For newbie or experienced driver who do not have a clear idea of how to retrofit 2013-2014 KIA CERATO in car DVD system from Seicane. Here I’ll show you the right steps to how to deal with the trouble. Be patient to read these steps one by one and you can get what you want.

2013 2014 KIA CERATO Left  after installation

2013 2014 KIA CERATO Left after installation

Precautions for this installation:

1.Make your car power dump to avoid getting electric shock.

2.Please disconnect the power Park your car in the right place before you start any work.

3.Remove your key in case of any danger.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

KIA CERATO in car DVD system installation instruction

1. Pry the side panel with a lever, and then remove it.

Pry the side panel with a lever, and then remove it

Pry the side panel with a lever, and then remove it

2. Remove four screws by the screwdriver.

Remove four screws by the screwdriver

Remove four screws by the screwdriver

3. Remove the trim panel with your hands. If necessary, you may use a lever to loosen it.

3-1. Remove the trim panel with your hands. If necessary, you may use a lever to loosen it

3-1. Remove the trim panel with your hands. If necessary, you may use a lever to loosen it

3-2

3-2

4. Remove four screws around the factory radio with a screwdriver.

Remove four screws around the factory radio with a screwdriver

Remove four screws around the factory radio with a screwdriver

5. Take the factory radio out of the dash.

Take the factory radio out of the dash

Take the factory radio out of the dash

6. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

7. Check all the accessories for the new Seicane car stereo.

8. Connect the harnesses to the back of the new Seicane car stereo.

9. Connect the Seicane car stereo to your original car radio ‘s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place. All the installation is done.

We have done an excellent job of install 2013 KIA SORENTO DVD player from Seicane. Some of you may also have trouble with it. It doesn’t matter. For you not sure how to deal with it, you can ask the dealer for help. Now I want to recommend you a new DVD player from Seicane as followed:

http://www.seicane.com/android-aftermarket-radio-navigation-system-for-2013-2014-kia-cerato-left-with-dvd-player-bluetooth-mirror-link-gps-hd-1024-600-touch-screen-obd2-dvr-rearview-camera-1080p-video-tv-usb-sd-3g-wifi-steering-wheel-control-s168051l

During your driving trip the safe and convenient will be put on the first place. Why not choose this specially designed android in dash navigation. Not only the wireless Bluetooth but the high speed 3G&WIFI serves you what you look forward to.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>