413 views

Essential Tutorial on a 2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holden GPS Bluetooth DVD Car Radio Installation

If you are car driver, you must know how import part a car radio plays in your car. If your car radio is integrated with a lot of practical and entertainment features, then almost your different needs in car can be met. However, if your factory radio is not up-to-date enough or your factory radio has only single functions, please don’t hesitate to replace it with a new aftermarket car radio. The following is a 2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holdencar radio installation instruction from Seicane. If you own the same vehicle type, you can take this instruction as a reference.

2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holden GPS Bluetooth DVD Car Radio after installation

2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holden GPS Bluetooth DVD Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holden car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Using a panel removal tool, gently pry the upper trim/vent housing panel from the dash.

Using a panel removal tool, gently pry the upper trim/vent housing panel from the dash

Using a panel removal tool, gently pry the upper trim/vent housing panel from the dash

3. Pry the shifter surround panel. On manual transmission vehicles, unclip and reposition the shifter. Then remove the panel.

Pry the shifter surround panel. On manual transmission vehicles, unclip and reposition the shifter. Then remove the panel

Pry the shifter surround panel. On manual transmission vehicles, unclip and reposition the shifter. Then remove the panel

3-1

3-1

4. Remove two screws from the storage pocket. Then remove the storage.

Remove two screws from the storage pocket. Then remove the storage

Remove two screws from the storage pocket. Then remove the storage

4-1

4-1

4-2

4-2

5. Remove four screws from the accessory control panel.

Remove four screws from the accessory control panel

Remove four screws from the accessory control panel

5-1

5-1

5-2

5-2

5-3

5-3

6. Pull out the panel. This panel is very tough to remove, please be patient and the clips will release, then let the panel hang to side.

Pull out the panel. This panel is very tough to remove, please be patient and the clips will release, then let the panel hang to side

Pull out the panel. This panel is very tough to remove, please be patient and the clips will release, then let the panel hang to side

7. Unscrew two screws from the radio control panel. Then remove the radio control panel.

Unscrew two screws from the radio control panel. Then remove the radio control panel

Unscrew two screws from the radio control panel. Then remove the radio control panel

7-1

7-1

7-2

7-2

8. Remove the blue clip before removing the real connector.

Remove the blue clip before removing the real connector

Remove the blue clip before removing the real connector

9. Unscrew two screws from the radio chassis, and two screws near the top of the radio to release the screen.

Unscrew two screws from the radio chassis, and two screws near the top of the radio to release the screen

Unscrew two screws from the radio chassis, and two screws near the top of the radio to release the screen

9-1

9-1

9-2

9-2

10. Disconnect the connector at the back of the screen.

Disconnect the connector at the back of the screen

Disconnect the connector at the back of the screen

11. Unscrew two more screws in the original radio.

Unscrew two more screws in the original radio

Unscrew two more screws in the original radio

11-1

11-1

12. Remove the original radio.

Remove the original radio

Remove the original radio

13. Disconnect all connectors at the back of the original car radio.

14. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

15. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

16. Connect the Seicane car radio to your original car radio’s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. Put the new Seicane radio into the dash.

19. Put everything into their original place.

 

Wish you can learn something useful from the above installation steps. If you have any questions, you may browse some professional websites, consult your dealer or turn to a professional for help. If you are afraid of making damage to either your car or your car radio, you can also directly arrange a technician to install it.

If you wonder what kind of car radio can work well with your car, I’d like to share a powerful 2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holden car radio from Seicane to you. For more details, please click:

https://www.seicane.com/android-gps-radio-for-2008-2012-chevrolet-chevy-cruze-holden-with-hd-touchscreen-dvd-bluetooth-rearview-camera-1080p-steering-wheel-control-3g-wifi-s32751

With this all-in-one car radio installed in your beloved car, you will embrace an excellent driving experience.

Based on the stable Android 6.0 operation system and a high-quality 8 -Core 1.5 GHz Coretex-A53 processor, this car radio owns better capacity and performance to provide you with better service.

Although you don’t have a good sense of directions, with the help of the high-end 3D GPS navigation system, you can easily know your current locations and accurately navigate to your ideal destinations through turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Besides, as for the entertainment options, you can turn on the DVD player function to play videos, TV programs, movies, etc to relax both yourself and your passengers.

What are you waiting for? If you like this car radio, just add it to your shopping cart. Good luck!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>