Detailed instructions on the replacement of a 2014 Dodge Ram 1500 radio with Bluetooth GPS DVD Wifi

Are you worried about the complicated installation of a new radio that you are hesitant whether to replace your factory radio with a multifunctional 2014 Dodge Ram 1500 radio? If you want to improve your driving experience from now on, then you can rest assured to upgrade your factory radio now for the reason that the installation is definitely not a problem. With some experience of installing a car stereo, you can even do it by yourself at your home. If not, you can also go to a car stereo upgrade center to have it installed.

2014 Dodge Ram 1500 radio after installation

2014 Dodge Ram 1500 radio after installation

A step-by-step instruction about the installation of a 2014 Dodge Ram 1500 radio is provided for you as a reference if you are going to replace the radio on your own.

 

Precautions:

1. Please disconnect the negative cable on the vehicle battery to ensure security.

2. Please prepare a lever and a screwdriver before the installation.

 

 

The following is the step-by-step guide on the installation of a 2014 Dodge Ram 1500 radio:

 

1. Pry the cover at the top of the trim panel with a lever and remove it.

2014 Dodge Ram 1500 radio installation step 1

2014 Dodge Ram 1500 radio installation step 1

2. Remove two screws which hold the trim panel with a screwdriver.

2014 Dodge Ram 1500 radio installation step 2

2014 Dodge Ram 1500 radio installation step 2

3. Gently pry the outer edges of the trim panel with hands and remove it from the dashboard.

2014 Dodge Ram 1500 radio installation step 3

2014 Dodge Ram 1500 radio installation step 3

4. Disconnect the air conditioning control switch wire harnesses at the back of the trim panel, then remove the trim panel away from the dashboard and place it aside.

2014 Dodge Ram 1500 radio installation step 4

2014 Dodge Ram 1500 radio installation step 4

5. Remove four screws that secure the vehicle’s radio to the dashboard with a screwdriver.

2014 Dodge Ram 1500 radio installation step 5

2014 Dodge Ram 1500 radio installation step 5

6. Take the factory radio off the dashboard.

2014 Dodge Ram 1500 radio installation step 6

2014 Dodge Ram 1500 radio installation step 6

7. Disconnect the factory wire harness on the back of the radio.

2014 Dodge Ram 1500 radio installation step 7

2014 Dodge Ram 1500 radio installation step 7

8. Connect the wire harness to the back of the new Seicane radio as the user manual shows.

 

9. Put the new Seicane radio into the dashboard and turn it on to have a careful check.

 

10. If everything works well with the new radio, then install the four screws.

 

11. Install the trim panel and the two screws into their original place.

If you don’t have an ideal radio to replace your stock radio, you can refer to the following radio from Seicane which is the latest and most advanced 2014 Dodge Ram 1500 radio available at present.

 

http://www.seicane.com/s09286-2013-2014-2015-dodge-ram-1500-2500-3500-4500-android-4-4-4-gps-radio-canbus-obd2-bluetooth-dvd-player-hd-1024-600-touch-screen-navigation-system-with-mirror-link-dvr-rearview-camera-tv-s09286

 

With a large 7 inch multi-tuch screen to offer a convenient, practical and humanizing operation interface, this Seicane 2014 Dodge Ram 1500 radio will have voice prompts for accurate guidance and re-planning of the route automatically to lead you to you’re a number of locations. With the built in Bluetooth technology allowing you to have hands-free calls and stream music straight from your phone, it’s without a doubt that this unit will be the best choice for you to upgrade your factory radio right now!

Dodge Dakota Radio Removal and Installation Instruction

 

dakota

It’s easy to upgrade a Dodge Dakota radio to a latest head unit. Hundreds of aftermarket head units are on the market for your choice. You just need to go to the market and pick the suitable one for your car and install it in your car.

 

However, the installation should be professional for the reason that in dash radios are embedded in the car and have many wires connections. It’s not recommended to upgrade the head unit yourself if you didn’t have training before. Wrong installation may bring damage to the new unit or even worse. Please go to a car stereo upgrade shop to do the upgrade, or ask a professional for help.

 

The following is the removal and installation instruction for Dodge Dakota radio. Please disconnect the negative cable on the vehicle battery to ensure security. And, please protect the front seats and trim panel during upgrade.

 

  1. Remove the trim panel. Remove the screws on the trim panel and pry around the trim panel gently until it is loosened. Take the trim panel off the dashboard by disconnecting the wires at the back of it.
  2. Remove the radio. Unscrew the screws at the four corners of the radio. Then, put them in a box. Take the radio out of the dash and disconnect the wiring harness at the back of it.
  3. Install the new radio. Connect the new radio to the original wiring harness. The detailed connections of wires should be according to the instruction of the new radio. There would be a little difference between different units.
  4. Test the new radio. Connect the negative cable on the battery and turn on the new radio. Test whether all the functions are compatible with your car. Please pay attention to the installation of GPS antenna, radio antenna and TV antenna if you meet problems in these functions. If everything’s good, install the trim panel back to the dashboard.

 

The new Dodge Dakota radio will bring you more functions than the original one. Wish you enjoy the time with it. If you are still looking for a new head unit for your Dodge Dakota, here’s a good and cheap aftermarket radio for 2002 2003 2004 2005 2006 2007 Dodge Dakota for your choice. Check it out: http://www.seicane.com/top-2002-2007-dodge-dakota-p-u-durango-touch-screen-gps-radio-stereo-cd-dvd-player-bluetooth-music-ipod-iphone-mp3-aux-backup-camera-dual-zone-t6015

 

Dodge Dakota radio

Dodge Dakota radio

System Parameter
Operation system WinCE
CPU Cortex A9 MStar 785 1GHz
RAM 1GB
OSD languages Multiple Languages for choice

 

 

The dual zone function in this unit supports navigation system working with entertainment functions. If you are in another interface but the GPS map, the voice cue will remind you of the road conditions as well.

 

The navigation system in this unit supports 3D GPS maps with voice cues, distance information, POIs, road planning and so on. You will never get lost with this function.

 

It has DVD player for 1080p HD videos and format DVD±R, DVD±RW, CD-R/RW, VCD, HDVD, DVCD, DIVX. And, all the set parameter can be memorized and restored automatically.

 

It has Video/Audio/Aux input and output ports. You can connect to amplifier, headrest LCD monitor, rearview camera and other external media devices. It also has USB port and SD card slot for music and movie play, photo view, E-book Reading and so on.

 

It is equipped with backup camera input for connecting rearview camera or intelligent security systems. You can install a rearview camera in the car and watch the video of the back of your car when reversing the car.

 

The rearview camera is optional to this unit. You can add it to the unit when ordering. Wish you like this unit and enjoy shopping. More functions and discount are on: http://www.seicane.com/top-2002-2007-dodge-dakota-p-u-durango-touch-screen-gps-radio-stereo-cd-dvd-player-bluetooth-music-ipod-iphone-mp3-aux-backup-camera-dual-zone-t6015