10,573 views

Detailed removal steps for 2010 2011 2012 2013 Subaru Legacy audio cd stereo with speaker system

What should we do if we have the desire to install a new stereo in  Subaru Legacy of 2010 2011 2012 2013?Some people may choose to make a call and a technical worker will do it for you if you paid him.However,there are also many people decide to do it themselves for it’s a possible thing.

If you are the owner of Subaru cars,then you should be curious about this article which is about detailed removal steps for 2010 2011 2012 2013 Subaru Legacy audio cd stereo with speaker system.And before we talk about this,here is a video for you which will show you general functions and its operations here:

Precautions before new radio installation:

1.If you have installation instructions from the dealer,please read it carefully and do according to it

2.You should turn off all affairs of car and make sure that you have finished parking series to avoid any danger during later process

3.Please remember to disconnect negative power connector to ensure your safety

With notices on all of them,next we will learn how to remove original stereo and install Subaru Legacy audio system.

 

2010 2011 2012 2013 Subaru Legacy factory audio removal:

1.Unscrew out this handle

Unscrew out this handle

Unscrew out this handle

2.Use a removal tool,pry trim panel and release it(but not to remove)

Use a removal tool,pry trim panel and release it

Use a removal tool,pry trim panel and release it

3.Remove the panel around it

Remove the panel around it

Remove the panel around it

4.Pry outside trim panel,you can try some places and remove it,disconnect cables at the back of original audio

Pry outside trim panel,you can try some places and remove it

Pry outside trim panel,you can try some places and remove it

disconnect cables at the back of original audio

disconnect cables at the back of original audio

5.Take 2 screws down with a screwdriver

Take 2 screws down with a screwdriver

Take 2 screws down with a screwdriver

6.After that,take away two side trim panels

take away two side trim panels

take away two side trim panels

7.Remove screws beside radio,5 in total.and 2 on one side,and 3 on the other side,then you can take out original cd stereo and unplug cables beside it

Remove screws beside radio,5 in total

Remove screws beside radio,5 in total

take out original cd stereo and unplug cables beside it

take out original cd stereo and unplug cables beside it

8.Take surface panel of CD away from the display,but before it you should remove screws on original unit first

Take surface panel of CD away from the display

Take surface panel of CD away from the display

Before installation,you can have a look at following image:head unit after replacement,audio GPS navigation system of 2010 2011 2012 2013 Subaru Legacy.This is a stereo which suits your car and maybe it can also be installed in your car even it doesn’t belong 2010 2011 2012 2013 Subaru Legacy.

head unit after replacement,audio GPS navigation system of 2010 2011 2012 2013 Subaru Legacy

head unit after replacement,audio GPS navigation system of 2010 2011 2012 2013 Subaru Legacy

 

2010 2011 2012 2013 Subaru Legacy new dvd installation:

9.Connecting wires as following images show

Connecting wires

Connecting wires

Connecting wires 2

Connecting wires 2

Connecting wires 3

Connecting wires 3

10.After connection,put trim panel back on it and leave one cable outside

put trim panel back on it and leave one cable outside

put trim panel back on it and leave one cable outside

11.Connect red round cable on upper right side of the panel

Connect red round cable on upper right side of the panel

Connect red round cable on upper right side of the panel

12.Make outside cables and back of new unit connected

Make outside cables and back of new unit connected

Make outside cables and back of new unit connected

13.Mount new audio into the place for it

Mount new audio into the place for it

Mount new audio into the place for it

14.Fix removed screws and make panels back to original positions

Fix removed screws and make panels back to original positions

Fix removed screws and make panels back to original positions

Only if you can do it as mount instructions say you will surely accomplish this installation for Subaru Legacy dvd navigation,everything needs instructions when we have no experience on it,so is it.

If there still happen some problems,then you should find out the reason and correct it.Or you can also find someone who works in this market for help,for example ,you can visit next website,hope it can help to solve your doubts:http://www.seicane.com/car-bluetooth-radio-upgrade-sat-nav-system-specialized-for-subaru-legacy-built-in-dvr-3-zone-pop-fm-am-hd-radio-tuner-with-gps-dvd-3g-wifi-c061-1.

 

 

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>