1,983 views

Detailed instructions on the replacement of a 2014 Dodge Ram 1500 radio with Bluetooth GPS DVD Wifi

Are you worried about the complicated installation of a new radio that you are hesitant whether to replace your factory radio with a multifunctional 2014 Dodge Ram 1500 radio? If you want to improve your driving experience from now on, then you can rest assured to upgrade your factory radio now for the reason that the installation is definitely not a problem. With some experience of installing a car stereo, you can even do it by yourself at your home. If not, you can also go to a car stereo upgrade center to have it installed.

2014 Dodge Ram 1500 radio after installation

2014 Dodge Ram 1500 radio after installation

A step-by-step instruction about the installation of a 2014 Dodge Ram 1500 radio is provided for you as a reference if you are going to replace the radio on your own.

 

Precautions:

1. Please disconnect the negative cable on the vehicle battery to ensure security.

2. Please prepare a lever and a screwdriver before the installation.

 

 

The following is the step-by-step guide on the installation of a 2014 Dodge Ram 1500 radio:

 

1. Pry the cover at the top of the trim panel with a lever and remove it.

2014 Dodge Ram 1500 radio installation step 1

2014 Dodge Ram 1500 radio installation step 1

2. Remove two screws which hold the trim panel with a screwdriver.

2014 Dodge Ram 1500 radio installation step 2

2014 Dodge Ram 1500 radio installation step 2

3. Gently pry the outer edges of the trim panel with hands and remove it from the dashboard.

2014 Dodge Ram 1500 radio installation step 3

2014 Dodge Ram 1500 radio installation step 3

4. Disconnect the air conditioning control switch wire harnesses at the back of the trim panel, then remove the trim panel away from the dashboard and place it aside.

2014 Dodge Ram 1500 radio installation step 4

2014 Dodge Ram 1500 radio installation step 4

5. Remove four screws that secure the vehicle’s radio to the dashboard with a screwdriver.

2014 Dodge Ram 1500 radio installation step 5

2014 Dodge Ram 1500 radio installation step 5

6. Take the factory radio off the dashboard.

2014 Dodge Ram 1500 radio installation step 6

2014 Dodge Ram 1500 radio installation step 6

7. Disconnect the factory wire harness on the back of the radio.

2014 Dodge Ram 1500 radio installation step 7

2014 Dodge Ram 1500 radio installation step 7

8. Connect the wire harness to the back of the new Seicane radio as the user manual shows.

 

9. Put the new Seicane radio into the dashboard and turn it on to have a careful check.

 

10. If everything works well with the new radio, then install the four screws.

 

11. Install the trim panel and the two screws into their original place.

If you don’t have an ideal radio to replace your stock radio, you can refer to the following radio from Seicane which is the latest and most advanced 2014 Dodge Ram 1500 radio available at present.

 

http://www.seicane.com/s09286-2013-2014-2015-dodge-ram-1500-2500-3500-4500-android-4-4-4-gps-radio-canbus-obd2-bluetooth-dvd-player-hd-1024-600-touch-screen-navigation-system-with-mirror-link-dvr-rearview-camera-tv-s09286

 

With a large 7 inch multi-tuch screen to offer a convenient, practical and humanizing operation interface, this Seicane 2014 Dodge Ram 1500 radio will have voice prompts for accurate guidance and re-planning of the route automatically to lead you to you’re a number of locations. With the built in Bluetooth technology allowing you to have hands-free calls and stream music straight from your phone, it’s without a doubt that this unit will be the best choice for you to upgrade your factory radio right now!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>