With the rapid development of technology, compared to a factory radio, a new aftermarket car radio can be compatible with more upgraded and new modern features which can bring you more comfort, convenience and joyfulness. If you are fed up with your factory radio, you can think about replacing it with a new aftermarket car radio. This article is mainly about how to remove and install a 2012 2013 2014 2015-2017 TOYOTA CAMRY European American car radio. If you have the same dashboard, you can refer to the following guide.
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2012 2013 2014 2015-2017 TOYOTA CAMRY European American car radio installation instruction
1. Remove the lower dashboard trim panels and the upper air conditioning vents.
2. Gently pry the upper dashboard housing from the radio’s trim bazel using either an automotive trim tool or your hands.
3. After the upper dashboard housing has been disconnected, remove the two upper & two lower radio mounting screws from the dashboard.
4. Once the four radio mounting screws have been removed, gently lift the radio from the dashboard in order to gain access to the factory wiring harnesses on the backside.
5. Disconnect the connectors at the back of the radio.
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original radio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
Wish you can get some help from the above installation guide.If you meet any problems you cannot solve by yourself, you can seek help from your dealer, someone experienced or a professional.
Besides, before installation, it is essential for you to select an ideal car radio for your beloved car. If you have no ideas, you can check out the link below which is a remarkable 2012 2013 2014 2015-2017 TOYOTA CAMRY European American car radio from Seicane. For more information, you may click:
This all-in-one car radio is loaded with the latest Android 7.1 operation system and a strong quad-core CPU processor, so with it installed in your car, you will enjoy its more stable operation, better performance and higher configuration.
Even you are not good at identifying directions, thanks to the worldwide real-time GPS navigation system, you are able to know your current locations and find the right way to reach your desired destinations. And with dual zone function, this unit enables you to listen to your favorite music while navigating, which won’t have any negative influence on GPS function.
Besides, both hands-free calls and streaming music are available as long as you connect this unit to your Bluetooth-enabled mobile phone. Therefore, you can sync your phone book so as to dial, answer, reject and mute Bluetooth hands-free calls as well as listen to Bluetooth streaming music.
Wish you like this unit and good luck to you!