How to remove VW Jetta Radio with Carplay Android Auto Support backup Camera

Whey you purchase a vw Jetta, definitely a new car stereos will come with it. After some years of constant use, you might fed up with the factory radio system and need to remove it.Even if you are not tired of it, the old radio can develop a fault that cannot be repaired, so the need to replace it with a new one comes in.Nevertheless, not everyone knows how to remove their VW Jetta in a logistic way. For the first-timers most of the car owners, it is essential to know how to replace the radios on their own. Without wasting much time, the following steps guide of Seicane’s VW Jetta Replacement can probably make a good model for your installation journey.

top

Before installation, you should keep in mind by reading some important tips. First of all, you can turn off your car engine and prepare some removal tools such as lever and screwdrivers before the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2016-2018 VW Volkswagen Jetta car radio installation guide

Step 1:  Take out the radio’s front casing carefully by using removal tool.

图片1

Step 2:Use screwdriver to remove the screws nuts and bolts that fasten the factory radios.

图片2

Step 3:pull the old factory radios out from its seating position.

图片3

Step 4: disconnect the radio from the Wires Behind carefully until they just come right out without any issues.

图片4

Step 5: Mount The New Radio system and make sure whether the wires have been accurately connected.(some systems do not require any wire conversions)

图片5

Step 6:Replacing the speakers system with removal tools.

图片6

Step 7: Check whether the new adapters are compatible with the new radio and test the functions of the new touchscreen.

图片7

Undoubtedly, the whole concrete process doesn’t end up with these steps above and you still will meet some trouble that will beyond you as a DIY person. But you can take it as a challenge and ask for the professional for help as they will offer you the relevant technical support at once. Another recommended choice is to get a perfect sound system that improve your infotainment system. After all, anyone sitting at your car would get a pleasurable feeling if your sound system has been upgraded greatly. In terms of the head unit, the brand is the key to depend the quality of your radio system. Here I would highly recommend Seicane, which focuses on making car stereos and offer the best and the quickest service for every customer abroad. If you want to try a reliable product, this  VW Jetta Radiowould be the best option, which includes many installation details and car accessories here. Want to know more information or have some questions? Please contact it now.

end

 

 

 

What are the simplest way to install BMW Series 5 Stereo Navigation System with Bluetooth Carplay

In celebration of International Women’s Day, I hang out with my best friend yesterday and she brought me a big surprise which is a new head unit that just fit for my BMW Series 5. When I first receive this gift, the joy has filled with my heart and I can’t wait to replace it at once. Fortunately, everything goes well after I absorb some relevant and useful technical knowledge online. Here I would like to share some experience about how to install BMW Series 5 Stereo in the simplest way for those beginners as a reference.

TOP

 

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

Installation Instruction of Navigation for BMW 5 Series E60 2009-2012 Radio

Step 1: Take off the left screw and the right screw.

图片1

 

Step 2: Lever original car screen frame and Pull out the frame.

图片2

 

Step 3: Disconnect LVDS connector and the power cable.

 

图片3

Step 4: Lever the vent panel as reveal from the right side and the middle vent panel from the bottom.

图片4

 

Step 5: Lever the left panel as reveal and Take off the emergency light cable.

图片5

 

Step 6: Take off the left screw and the screws on the right side.

图片6

 

Step 7: Pull out the air conditioner panel and Unplug air conditioner connectors

图片7

 

Step 8: Lever the box from the right side and the same box from its left side.

图片8

 

Step 9: Take off the 2 screws, then Pull out the head unit and disconnect power cable.

图片9

 

Step 10: Pull out new wires( power cable, USB wire,GPS antenna) and original car LVDS connector.

图片10

 

Step 11: Connect above wires with the new android screen

 

图片11

Step 12: Install new screen, first put bottom inside, then fix the screen to stand and adjust to exact screw position on the top.

图片12

 

Step 13: Fix the screws and take out original car optical fiber connector.

图片13

 

Step 14: Connect original car power cable with new power cable and the unplugged fiber optical connector with new wiring.

图片14

 

Step 15: Connect new power cable with the car head unit, then Install the head unit and fix the 2 screws.

 

图片15

Step 16: Put the AC vent assembly back and fix 2 screws.

 

图片16

Step 17: After installing AC panel, Connect emergency light wire and Put emergency light assembly back.

图片17

Does this essay tapped your sense familiar to you after you reading these steps? Hope it can help you and I believe you can get a sense of achievement and value if you accomplish by your hands. If you have hard time installing car touchscreen by yourself, you can ask for your car dealer for help or search for some technical service by paying for some money. But for those who are reluctant to go outer assistance, I would like to recommend the link of BMW 5 Series stereo replacement to them, as there are full of variety of resources. Just visit it if you like.

End

 

 

 

How to replace 2012-2014 Chevrolet S10 Radio navigation system support Bluetooth Carplay rearview camera

Last week, I got the new surprise in my life as my uncle buy a new car stereo which is just suitable for my new Chevrolet car. I have nice day when I first got this new gift and can’t wait to replace it on my car. The sound bar is perfect and after I finish the process, all of the function have stable and good performance, which increase much joy to my later in-car life. In order to share these good news to those who doesn’t have idea about how to replace their new Chevrolet Android unit, I wrote this article to help you to solve your problems. Hope it can give you advice in some extent.

 top

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2012 2013 2014 Chevrolet S10 stereo removal

1.Gently lever the upper trim housing panel from the dash with a removal tool.

1

2.Lever edges of side panel,release and reposition the shifter.

2

3.Make out 2 screws(this screw and the other corresponding one) from the storage pocket,remove car storage.

3

4.Make out 4 screws which are on the accessory control panel.

4

5.When you remove this very tough panel you should be patient and the clips will loosen.,then let panel hang to side.

5

6.Make out 2 screws from radio control panel,unplug the radio control panel.

6

7.Take out the really strange blue clip absolutely before removing the other connector,and remove the latter one.

7

8.Get out 2 screws which are on the radio chassis,and remove the other 2 screws which are near the top of the stereo,in order to fasten the screen.

8

9.Make screen out by pulling,and get behind clip out.

9

10.There are still 2 screws on stereo,remove them from car head unit.

10

11.Take stereo and connectors out.

11

12.Read installation instructions that within you new bought stereo,precisely make cables connection between new stereo with car.

13.After correct connection,install your new unit into your car and turn on it to test whether your actions are all right.

13.Fix 2 screws to the stereo and install the dvd player in position.

14.Make 2 screws back to the place near top of the stereo,and 2 screws to radio chassis.

15.Make other parts back to original place and don’t forget to firm their screws back to them to fix corresponding machine.

These are the whole process about installation and I believe you could finish it as long as you follow these steps carefully. For those who still have problems during the procedure, I would like to share a link of Chevrolet Android unit from Seicane, where there are supply of tutorials and car accessories on its official website,you can also ask for the assistance via e-mail or phone as you like.

Hope you have good day and get what you want here!

end

How to upgrade 2013-2014 TOYOTA Vios Radio with Bluetooth Carplay support Camera

Nowadays, touchscreen radio becomes more and more people’s choice, because not only it’s easy to operate, but it offers more functions that add fun to our journey and help increase driving safety at the same time. However, if you want to upgrade your Toyota Vios Radio, you need to learn some basic knowledge about the installation. And the following article of Installation instruction of 2013-2014 Toyota Vios Radio with Bluetooth Carplay support Camera will be helpful to those who are the beginner of DIY Installation.

top

 

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2013-2016 Toyota Vios car radio installation guide

Step 1. Remove the panel with your hands,please use a plastic removal tool if necessary.

图片1

 

Step 2. Disconnect the connector at the back of the air vent.

图片2

Step 3. Use a screwdriver to remove four screws that are holding the original car radio.

图片3

Step 4. Gently take out the original car radio from the dashboard.

Step 5. Unplug the connectors and cables at the back of the original car radio.

图片5

Step 6. Check all the accessories for the new car radio.

Step 7. Connect the harnesses to the back of the new Seicane car radio.

Step 8. Connect the car radio to your original car radio’s plugs.

Step 9. Put the new car radio into the dash.

Step 10. Turn on the new car radio and have a comprehensive check if it works well.

Step 11. Install 4 screws back to their original position.

Step 12. Install the trim panel back to its original place.

After reading these 12 steps, you should know how to upgrade your car radio now. But don’t forget to check all of the functions of the stereos and see whether it can work well. If you think it is too difficult for you to complete it, you can ask for your car dealer for help as they will provide you with the good advice. Another useful way to solve the problem is that you can search the answer from the Internet. There are various resources available there and here is a recommended link of Toyota vios Android head unit, which can support multiple functions.

Operated with the latest Android 10 System and large storage, you can have smooth and stable performance, which means you can download many different apps and make phone calls at the same time. You can also connect your phone to the radio and the data will be update at once. You don’t need to worry about whether you can use your phone applications anymore.

In a word, don’t miss this good chance if you’re really love it.

end

How to remove and upgrade 2016 Hyundai Elantra Car Audio System easily?

Imagine you’re driving your car and feel bored, a head unit would be a wonderful choice for you as it can reduce unhappiness and keep the original car’s function all the time. So more and more people would like to install the Android GPS Navigation System in the car,but one of the problem is that the DIY installation often costs much energy and time. If you’re the owner of Hyundai Elantra, what would you do to begin your installation by yourself? To avoid this problem in the process, the following 7 steps of Removing and Upgrading your 2016 Hyundai Elantra Car Audio System would tell you the overview of the installation and you can take it as a reference.

top

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever or a screwdriver before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2016 Hyundai Elantra Radio Installation Instruction

 

Step 1.Remove the left and right trim panel by the plastic removal tool.

图片1

 

Step 2.Remove six screws that fixed the frame on the dashboard.

图片2

 

Step 3.Take out the frame and unplug the connector.

图片3

 

Step 4.Remove four screws that fixed the radio on the dashboard.

图片4

 

Step 5.Take out the car radio and unplug the connectors at the back of the radio.

图片5

 

Step 6.Connect the harnesses to the back of the new car radio.

图片6

 

Step 7.Put everything into the original place.

图片7

After reading the 7 steps of removing the car radio, are you still confused with the installation of stereos? As for me, I believe you can make success in installing your car Android units as long as you stick to these 7 steps as your principles carefully. But if you have some questions about this receiver, you can consult a local car audio shop or ask the professional car dealer for help. If you want to know more details about this installation parts, Seicane Stereos with the features you want will be a far better choice as they have made car audios over 10 years and will give you good advice as you wish. Here is the link of new release quality radio of 2016 Hyundai Elantra Car Audio System, which will show you a totally different interface.

Inside there are audiophile-grade capacitors that help give you more bass and stronger sound and better signal-to-noise radio.

I love music whenever, wherever I drive. So one of amazing things is the product comes with a built-in 36-band EQ setting, which you can tweak different frequencies, boost and cut to your heart’s content. I am sure your journey won’t be boring anymore.

All in all, if you really desire to find what you love,please don’t hesitate to visit it now.

End

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A complete guide of replacement of 2008-2012 Ford Mustang F150 Car Stereos

With the move towards digital media, the DIY replacement of car stereos has become more and more popular and common for many car users as it can save budget and doesn’t consume much personal force. If you’d like to upgrade your car radios of 2008-2012 Ford Mustang F150 but aren’t confident in your ability or lack of time to install a new head unit by yourself, then you can take advantage of our following complete guide on this page, which will take as a reference for those who are in need.

top

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever or a screwdriver before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2008-2012 Ford Mustang F150 Radio Installation Instruction

 

Step 1.Remove two screws on the center console and pull up the the rectangular trim piece around the shifter

图片1

Step 2.Pull the center console up and Remove two Phillips screws from arm rest console

图片2

Step 3.Remove plastic trim around shifter and the center trim.

图片3

Step 4.Remove stereo side panels and six screws.

图片4

 

Step 5.use your finger to disconnect the HVAC connector on both sides of passenger and the driver

图片5

Step 6.Remove trim and disconnect connectors.

图片6

Step 7.Remove four 7mm screws and Disconnect connectors from the back of the stereo.

图片7

Step 8.Connect connectors in their proper slots.

 

Step 9.Tighten the six screws around the stereo and install two side panels around the stereo.

 

Step 10.Install center plastic trim, shifter trim, and tighten two Phillips screws on center console.

 

After installation, you should have a clearer overview about how to replace and upgrade this head unit by yourself. But don’t forget to do the last thing which is to switch on the ignition and test the operation of the head unit including sources, auxiliary inputs, fader and balance functions. Also, check the head unit switches off when the key is removed. If you are looking for more detailed answers, you can ask for the professional technician who can offer you good service online or offline. And if you want to know more basics about car stereos and related techs, please click this page of 2008-2012 Ford Mustang F150 and read its relevant buying guide to meet your need.

It’s our new release quality radio for Ford vehicles. This 12.1-inch touchscreen’s LCD layer is bonded with transparent glue directly to the glass, and both the glass and the screen look great and feel great when you go to use the touchscreen.

 

Driving is wonderful, but traffic jam is always horrible. I don’t know what’s the traffic situation in your area, but at our side, it’s really heavy. The most crowded situation is even a traffic jam for 2 hours. I once had this experience. You need to ease your impatience and this radio is perfect. You are able to watch videos, movies when waiting for the long annoying traffic jam. The big screen gives you super super high resolution of 1024*768.

 

Plus, it comes with built-in WIFI network and can support the most up-to-date 4G module, allowing you to easily get access to internet for online music listening, videos watching, games watching, e-mail checking, etc as long as you reach a WIFI hotspot or connect it to a 4G module.

Never hesitate to catch the good things that should belong to you so just click it now!

End

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Radio Head Unit Upgrade Guide for 2014-2018 Mercedes Benz C Class

There are so many parts of a car. More or less, we may be not satisfied with some of them, that’s the reason why there is still room for car improvement that even drivers can do it themselves. For example, recently, lots of car owners upgraded the factory radio system to an aftermarket large screen head unit. Compared to the old radio, the new radio system provides more fun and helps improve drivers’ safety on the road.

If you are looking for a way to upgrade your Mercedes Benz C Class (2014-2018) radio, you are right here. The following is a guide about how to install a 10.25” Android radio head unit in a Mercedes Benz C Class. Take a look at it and learn more about car radio upgrade.

安装对比图

How to remove the 2014-2018 Mercedes Benz C Class radio?

To remove the old radio, we should have plastic pry tools and screwdrivers in hand. And before working, it’s required to power off the car battery, making everything safe.

Take a look at the original radio system.原车中控

Step 1, Use a plastic pry tool to pry up on the speaker cover that is on the dashboard top and right behind the car screen.s1

Step 2, Use screwdriver to remove two screws that are holding the bracket in place for the stock screen.s2

Step 3, Pull out the old screen and disconnect the two connections on the back of the bracket.s3

Step 4, Press to open the armrest box near the handbrake, then use a pry tool to remove the silver trim piece of the center console.s4

Step 5, Remove the two screws.s5

Step 6, Then you can lift up on the center console, just set it aside.s6

Step 7, Next, remove two screws that fixed the original radio unit.s7

Step 8, Pull out the original radio unit and remove the connections. At this moment, you finish the removal of the factory radio.s8

How to put a new Android radio in the car?

With a new head unit in hand, you can install it to the car by following below steps.

Step 9, Connect cables of the new touchscreen radio system to the car plugs.s9

Step 10, Keep the original radio unit, connect it again to the car via the new wiring cables, and install it back to the dashboard.s10

Step 11, Connect and place well the AUX connector. It’s for audio/video input.s11

Step 12, Install back the center console as well as the silver trim piece.s12

Step 13, Install the new bracket (used to stabilize the new screen), pull the new cable ports (used to connect the new car screen) go through the new bracket, then fix the new bracket well.s13

Step 14, Connect the new screen to the car.s14

Step 15, Fix well the new screen.s15

Step 16, Finally, install back the speaker cover.s16

Step 17, Now you can turn on the car to test the new Android radio system.安装效果

What can the 2014-2018 Mercedes Benz C Class new radio do?

Play HD videos & quality music

A big screen provides better viewing experience when watching videos. Besides, when you play music, you can even set the DSP to get perfect sound effects. Since this 2014-2018 Mercedes Benz C Class Android car radio supports 4G/WIFI network, you can access the Internet to explore fun videos and more music, as well won’t miss the latest news on the Internet.

Apply Apple Carplay

The Carplay function is the most advanced application about phone connection technology. Using Carplay, your radio acts as an Apple phone, you are able to use the phone navigation, music, videos, telephone function etc. What’s more, all these can be controlled by SIRI, adding much safety and convenience to the drive.

Navigate the best route

There are so many roads and we need reliable navigation system to take us to destinations. This GPS car radio supports various map apps and online/offline map navigation. With the accurate traffic information, we get to our destination quickly and safely.

Connect Bluetooth

The Bluetooth is another way to connect your phone to the radio. By Bluetooth connection, you can use phone’s media resources on the radio. You can also make hand free calls when there is any call during driving, this makes you drive safer.

Support external car cameras

Most drivers have troubles in reversing and parking a car. Don’t worry, the large touchscreen radio head unit can solve.Just installing a rear view camera, everytime when you reverse the car, the radio screen will automatically show you clear rear view situations, which help you park the car easier.

If you can not stand the terrible factory radio, why not replace it?Mercedes Benz C Class

2010-2015 Toyota Reiz Mark X Factory Audio System Upgrade Guide

A nice car audio system always helps a lot, especially on long journeys. The entertainment and driving assistant provided by the audio system make our drive fun and safe. If there haven’t such multifunctional audio in your car, you are advised to replace it as soon as possible.

driving

Whether you are considering replacing the factory audio by yourself or asking professional service, checking this radio upgrade guide of 2010-2015 Toyota Reiz Mark X will more or less help you. Let’s check it out.

Detailed steps to replace 2010-2015 Toyota Reiz Mark X factory audio

Things to do before working on the audio system
1, Purchase a suitable car audio for the car. You can try the Seicane Android car audio with GPS which is easy to use and multifunctional.

2, Prepare handy tools such as plastic pry tools, screwdrivers in different sizes, tapes, knife etc.

3, There are different cable plugs in the audio system, so cut off the car power before working to ensure safety.

This is the original car audio system.

原车中控

Step 1, Remove the trim panels on the two sides of the audio.

s1

Step 2, Remove screws that fixed the car audio unit.

s2

Step 3, Take down the audio and disconnect the plugs.

s3

Step 4, Remove screws of the metal brackets that fixed the original main unit and the A/C button panel.

s4

Step 5, Separate the main unit and the A/C button panel.

s5

Step 6, Keep the A/C button panel and install it back to the dash.

s6

Step 7, Tighten the screws.

s7

Step 8, Connect Power Harness, RCA Cable and CAM Cable to the new audio.

s8

Step 9, Correspondingly connect the new audio cables to the car plugs.

s9

Step 10, Install the touchscreen audio to the dash.

s10

Step 11, Install the trim panels back.

s11

Step 12, Power on the car to test the new GPS audio system to see whether it functions normally.

功能

The basic audio of 2010-2015 Toyota Reiz Mark X may be easier to replace than other cars’. But in fact, whatever your car model is, you don’t need to worry anything, there are so many tutorials online can help you, no mention you can get to the Auto Parts Store to do that.

After installing an upgraded Android touchscreen radio, your driving experience will be greatly improved. In terms of entertainment for fun, you are given choices like enjoying some musics offline/online, watching videos/movies, listening to FM/AM/RDS radios, and connecting your phone to the audio since it’s phone integrated. As to keeping safer drive, you can add some external car cameras such as rear view camera, DVR to help you. Overall, you have better drive with a good car radio system.

How to Put an Aftermarket Touchscreen in 2013-2016 BMW 5 Series F10 F11 NBT?

People have different reasons to upgrade their factory car radio systems. If you are planning to install an aftermarket touchscreen head unit to your 2013 2014 2015 2016 BMW 5 Series F10 F11 NBT, you get to the right place. Let’s tell you how to do.

bmw-5-series

Section 1, Getting a suitable aftermarket head unit

When you Google car radio on the Internet, you are given thousands of options, as result, you find it’s hard to decide which to buy. You’d better make the buying plan at first, as below listed,

  1. Know the year and model of your car
  2. The way to upgrade the factory radio, like replacing the car screen, or changing the whole car radio system, or adding new speakers only etc.
  3. Make your budget.
  4. Now Google the radio you want.

This installation guide is showing you how to replace the car screen which turns out the super easy way to upgrade a BMW radio system. And we recommend the Seicane touchscreen car radio, it comes with lots of outstanding features including,

  • 10.25” large touchscreen, resolution up to 1920*720
  • Quality hardware to keep smooth operation and stable performance
  • Be compatible with original cars with / without original navigation
  • More entertainments such as listening to FM/AM radios, playing music, displaying videos, applying Carplay etc.
  • Support all original car functions, easy to use
  • Support original camera and aftermarket cameras

You can check more information at Seicane Official! They provide excellent service to each customer.

视频缩略图

Section 2, Doing the best preparation

First of all, no matter what kind of job you do, you need to prepare tools to help you work conveniently and quickly. The tools you need to use for removing and installing a radio will include plastic pry tools, screwdrivers in different sizes, tape, electric drill and so on.

Secondly, as you can find, there are lots of car plugs we will work on, thus, powering off the car before working on the radio system is must. Keeping safety.

Lastly, do not put the disassembled accessories everywhere, or you may not find them in time.

Section 3, Removing and installing steps

Now, let’s follow below steps to start. See the original radio system.

原车中控

Step 1, Use plastic pry tool to remove the A/C panel. Mind your hands, be careful not to scratch the panel.

s1

Step 2, Take down the A/C panel, disconnect the plug.

s2

Step 3, Remove two screws that fixed the car radio screen, one on left side, another on right side.

s3

Step 4, Take down the car screen and unplug the connectors.

s4

Step 5, Remove two screws that fixed the DVD button panel.

s5

Step 6, Pry to remove the A/C button panel.

s6

Step 7, Take out the DVD unit, unplug the power cable and the fiber optical connector (if with OEM fiber optical).

s7

Step 8, Before using the aftermarket car radio screen, check its parts whether in good condition.

s8

Step 9, Use new cable to connect the unplugged fiber optical connector (if with OEM fiber optical). If you are not sure the connectors, read the user manual.

s9

Step 10, Then connect other new cables to the DVD unit, and install it back to the dashboard.

s10

Step 11, Install back the DVD button panel as well as A/C button panel.

s11

Step 12, Connect the new radio screen and fix it well.

s12

Step 13, Finally, install back the A/C panel.

s13

Step 14, You can turn on the car to use the new radio system to check whether everything works normally. If there is problem, it’s advised to double check the wiring condition and ask professional after-sale service if needed.

安装效果图

A Guide for Installing Seicane 10.25” Upgraded Touchscreen Radio in 2010 2011 2012 2013 BMW X5 E70 (CIC System)

seicane-car-stereo-navigation-systemAs one of popular aftermarket car radio suppliers, Seicane offers quality and affordable Android car radio with GPS for various car models. These radio system are easy to use, comes with lots of amazing functions and keep stable performance, greatly improving your driving experience.

For BMW vehicles, Seicane released the H8 series car screen which BMW owners can used it to replace their small factory screen and enrich more functions. Now at this post, you’ll learn to know how to install the Seicane H814 , a 10.25” Upgraded Touchscreen Radio, in 2010 2011 2012 2013 BMW X5 E70 (CIC System).

  • Basic Tools: Plastic pry tools, screwdrivers
  • Note: Ensure the car power is cut off before working.

The removal and installation steps

Step 1, Use the plastic pry tool to pry open the A/C outlet, take down the outlet and disconnect its plug.

s1-1

s1-2

Step 2, Remove screws that fixed the original radio screen, take it down and unplug the connectors.

s2

Step 3, Remove screws that fixed the button panel, they pry to open it and take it down, as well as disconnect the plugs.s3-1s3-2s3-3

Step 4, Remove screws that fixed the original DVD unit, take it down and unplug all the connectors.

s4

Step 5, Have a check for the wiring harness as well as other accessories of the new radio screen system from Seicane.

s5

Step 6, Connect the new wiring harness to car plugs, then correspondingly connect the new screen and original DVD unit.s6

Step 7, Turn on your car to test the new radio system, if everything works normally, then install all the car parts back. If there is problem, check carefully whether the cables are connected correctly.  s7

By checking this guide, you may realize that indeed this is the easiest way to upgrade a radio in BMW vehicles when compare to installing an aftermarket radio system in other cars. Then, what people say about Seicane H814 Android touchscreen radio for 2010-2013 BMW X5 E70 (CIC System)? Let’s check out.

This unit is made of a big screen, when I watch videos and use navigation, I can see everything very clear. It always keeps my eyes in the most comfortable condition.” – Jay

Well, I love listening to radios, one of my favorites about this touch screen is it provides FM and AM radio worldwide, I am given lots of radio choices by this product.” – Andy

I own a second-hand BMW X5 E70 (CIC) which doesn’t come rear view camera, while I am the guy who can’t park and reverse a car well. After installing this Seicane car radio and adding the rear view camera, now I can park the car easily with the help of HD rear images.” - Rolla

It took me some time to find a suitable car screen to replace my 2012 BMW X5 E70’s basic screen. My friend recommended the Seicane and there turned out that every penny is worth it. This unit is easy to install, plug and play, and comes with lots amazing functions, adding more fun in my drive.” - Edward

Now, find your ideal radio in Seicane!

bmw-x1-f48