528 views

A Step-by-Step Instruction on a 2013 2014 VW Volkswagen SAGITAR GPS DVD Car Stereo Removal and Installation with a New Aftermarket Radio OBD2 DVR Backup Camera

As everyone knows, there is a good trend that more and more car owners are learning to replace their old factory radio with an advanced car radio. By doing so, they can create a better in-car environment and gain a brand new driving experience. This article is mainly about a detailed installation instruction for a 2013 2014 VW Volkswagen SAGITAR GPS DVD Car Stereo. So if you have a same or similar dashboard, this article is worth your careful reading.

2013 2014 VW Volkswagen SAGITAR GPS DVD Car Stereo after installation

2013 2014 VW Volkswagen SAGITAR GPS DVD Car Stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2013 2014 VW Volkswagen SAGITAR car stereo installation instruction

1. Remove the trim Panel with a plastic removal tool.

Remove the trim Panel with a plastic removal tool

Remove the trim Panel with a plastic removal tool

2. Remove four screws that fixed the radio on the dashboard.

Remove four screws that fixed the radio on the dashboard

Remove four screws that fixed the radio on the dashboard

3. Take out the original car radio.

Take out the original car radio

Take out the original car radio

4. There are connectors and cables at the back of the radio. Remove them.

There are connectors and cables at the back of the radio. Remove them

There are connectors and cables at the back of the radio. Remove them

5. Check all the accessories for the new Seicane car stereo.

6. Connect the harnesses to the back of the new Seicane car stereo.

7. Connect the Seicane car stereo to your original stereo’s plugs.

8. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car stereo into the dash.

10. Put everything into their original place. All the installation is done.

 

That’s all about the installation instruction for a 2013 2014 VW Volkswagen SAGITAR GPS DVD Car Stereo; wish you can get some help from it. If there are some difficulties that you cannot overcome independently, you can seek advice from your dealer or ask a professional for help. But if you haven’t got a suitable stereo yet, I’d like to recommend a wonderful 2013 2014 VW Volkswagen SAGITAR GPS DVD Car Stereo to you. For more details, please click:

http://www.seicane.com/10-2-inch-android-2013-2014-vw-volkswagen-sagitar-radio-gps-navigation-head-unit-with-touchscreen-bluetooth-obd2-dvr-backup-camera-tv-1080p-4g-wifi-steering-wheel-control-cpu-quad-core-mirror-link-s301032

Intergraded with the advanced Android 5.0.1 operation system as well as powerful Quad-core CPU, this great car stereo can facilitate your operation in a large degree. The high-end 3D GPS navigation system is specially built in so as to make it possible for you to find the best route to reach your ideal destinations. And thanks to the Bluetooth technology, the connection between your enabled phone and this car stereo can be easily realized so as to make you get access to hands-free calls as well as Bluetooth music. As for entertainment features, a variety of options are provided to add more fun to your trip. Wish you like it!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>