Knowing your car model, manufacture year and the size of your factory radio, you can easily find an ideal car radio replacement for your car. After that, it’s wise of you to find a detailed installation guide to help with the installation. Here I’d like to introduce the 2005-2009 Ford Mustang car stereo installation instruction from Seicane to you. Please look at the picture below, if you also have the same dashboard, you can take this instruction as a reference.
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2005-2009 Ford Mustang car stereo installation guide
Step 1: Remove the trim around gear shifter.
Step 2: Remove screws securing center console lid with a screwdriver.
Step 3: Remove the center console trim.
Step 4: Remove console side panels on both driver and passenger sides.
Step 5: Remove bolts securing radio bezel and AC controls.
Step 6: Unplug AC controls (from passenger side).
Step 7: Remove the radio bezel and AC controls.
Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.
Step 9: Check all the accessories for the new Seicane car stereo.
Step 10: Connect the harnesses to the back of the new Seicane car stereo.
Step 11: Connect the Seicane car stereo to your original car radio ‘s plugs, and put the new Seicane car stereo into the dash.
Step 12: Turn on the new Seicane car stereo and check whether the radio is working properly.
Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.
Under the guidance of this installation instruction for the 2005-2009 Ford Mustang car stereo, can you finish the installation on your own? If not, you’d better have it installed by a professional. Or you can go to the car stereo upgrade center to install it. If you have any question, you can consult your dealer.
Before the installation, it’s necessary for you to confirm your new car stereo can fit your car. If you have no idea about this, you can refer to this intelligent 2005-2009 Ford Mustang car stereo from Seicane, it’s is upgraded to the latest operation system for you to enhance the capabilities of your car. For more details, please click the following link:
This advanced Ford Mustang car stereo is loaded with the most powerful RK3188 1.6 GHz Cortex A9 Quad-core CPU, you can replace your factory radio with smoother performance and easier operation on the large 7 inch multi-touch screen. Slightly press the GPS button, you can easily get access to the turn-by-turn direction and voice prompts to find your way to your destination. A journey with safety and pleasure will be always with you when you wirelessly link with your compatible mobile phone to make and receive hands-free calls and stream music. It also comes with wiring harness for working with your factory wring.
Just enjoy your amazing trips with this great Ford Mustang car stereo in your car. Wish you have a wonderful time with it. Good luck to you!