1,251 views

A detailed installation guide for a 1998-2007 TOYOTA Land Cruiser 100 series head unit with Android 5.1.1 Radio DVD Player GPS Navigation System Touch Screen Bluetooth 3G WiFi

Now there are more and more car owners who choose to replace a the factory radio with a multifunctional head unit which can support many advanced features. If you own a 1998-2007 TOYOTA Land Cruiser 100 series, please look at the picture below, it’s an ideal 1998-2007 TOYOTA Land Cruiser 100 series head unit from Seicane. If you also have the same dashboard, you can take this step-by-step 1998-2007 TOYOTA Land Cruiser 100 series head unit installation guide as a reference to help with the installation.

1998-2007 TOYOTA Land Cruiser 100 series head unit after installation

1998-2007 TOYOTA Land Cruiser 100 series head unit after installation

Please notice before the installation:

1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2. A lever and a screwdriver need to be prepared before the installation.

3. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

1998-2007 TOYOTA Land Cruiser 100 series head unit installation guide

1.Remove two trim panels at each side of the center console and set it aside.

Remove two trim panels at each side of the center console and set it aside

Remove two trim panels at each side of the center console and set it aside

2.Remove the top panel and set it aside.

Remove the top panel and set it aside

Remove the top panel and set it aside

3.Remove 4 screws holding the unit with a Phillips screwdriver.

Remove 4 screws holding the unit with a Phillips screwdriver

Remove 4 screws holding the unit with a Phillips screwdriver

4.Gently take out the panel on the radio interface.

Gently take out the panel on the radio interface

Gently take out the panel on the radio interface

5.Take out the radio and disconnect cables at back of it.

Take out the radio and disconnect cables at back of it

Take out the radio and disconnect cables at back of it

6.Check all the accessories for the new Seicane head unit. Connect the harnesses to the back of the new Seicane head unit.

7.Connect the Seicane head unit to your original car radio ‘s plugs.

8.Put the new Seicane head unit into the dash.

9.Turn on the new Seicane head unit and have a comprehensive check if it works well.

10.Install 4 screws back to their original position.

11.Install the trim panel back to its original place.

Wish you can get help from the above installation guide for a 1998-2007 TOYOTA Land Cruiser 100 series head unit. Can you install your new radio in you car under the guidance of it? If not, don’t worry, you can ask a professional for help. If there is any question, you can consult your dealer. But if you don’t have an ideal radio for your car, I’d like to recommend this advanced TOYOTA Land Cruiser 100 series head unit from Seicane to you. Here’s the link, please check out the following link for more details:

http://www.seicane.com/seicane-s126012-1998-2007-toyota-land-cruiser-100-series-android-radio-dvd-player-gps-navigation-system-with-touch-screen-bluetooth-3g-wifi-aux-dvr-mirror-link-obd2-steering-wheel-control

With this TOYOTA Land Cruiser 100 series head unit in your car, you won’t get lost even in unfamiliar locations under the precise guidance of its 3D GPS function. A safer driving is easily accessible to you when you connect your mobile phone with the bluetooth of this unit to make or receive calls without taking your hands on the steering wheel control. This top stereo comes with a 6.2 inch HD 800*480 touch screen. Wish you like it and have a wonderful time with it!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>