3,577 views

9 steps to install 2012 2013 Ford focus Radio with GPS Navigation WiFi OBD2

I’d like to show you a picture at the beginning of this article: new Seicane 2012 2013 Ford focus Radio after installation.

2012 2013 Ford focus Radio after installation

2012 2013 Ford focus Radio after installation

This unit matches your car if it is one of 2012 2013 Ford focus. To see the space after radio removal is whether right for new unit is the only way to figure this question. After you are sure that this radio is suitable for your car and decide to install a new one by yourself, then you are right to read this essay which will show you installation guide for 2012 2013 Ford focus radio.

It also doesn’t matter if it seems to be improper for your car, because there are some places for stereo upgrade are common, it means that you can also learn a lot from the following description, and probably you can provide some advises to your friend.

Installing an aftermarket car stereo can be a self-done thing doesn’t mean that you can do it without taking care of anything.There are some notes for you before you begin any work.

2012 2013 Ford focus Radio installation

1)At frist remove two screws at the bottom of the radio with a Phillips screwdriver.

2012 2013 Ford focus Radio installation step 1

2012 2013 Ford focus Radio installation step 1

2)Then pry the interface trim panel of the radio and pull it out slowly.

2012 2013 Ford focus Radio installation step 2

2012 2013 Ford focus Radio installation step 2

3)Now unplug the connector behind the panel.

2012 2013 Ford focus Radio installation step 3

2012 2013 Ford focus Radio installation step 3

4)Remove two screws holding the radio in dash.

2012 2013 Ford focus Radio installation step 4

2012 2013 Ford focus Radio installation step 4

5)Then pull out the radio slowly and disconnect wiring behind the radio.

2012 2013 Ford focus Radio installation step 5

2012 2013 Ford focus Radio installation step 5

6) Have a patient look at those cables and antennas,plug them one by one as the instructions show,which is very important in your installation.

7) After all cables are pluged well, install Seicane radio into it.

8) Firm 2 screws on the radio and install removed panels and screws back to your Ford focus.

9) With everything set well, turn on your radio and check all functions whether operate well.

 

Here is a good aftermarket radio of Seicane which fits 2012 2013 Ford focus:

http://www.seicane.com/seicane-s09150-quad-core-android-4-4-4-dvd-radio-gps-navigation-for-2012-ford-focus-with-obd2-bluetooth-wifi-mirror-link-hd-1024-600-touch-screen-dvr-backup-camera-tv-video-canbus-usb-sd-steering-wheel-control

This Ford focus Radio has intelligent android 4.4.4 operation system, high quality RK PX3 with 1.66 GHz frequency Quad-core CPU, and 8 inch HD 1024*600 Pixels multi touch screen with smooth operation high sensitivity.

Loaded with a lot of upgraded software and hardware components, this remarkable 2012 2013 Ford focus Radio will bring you a totally different driving experience for you. You can enjoy a visually radiant display and an easier operation on its 8 inch multi-touch screen with 1024*600 pixel resolution. The built-in GPS can support updating the latest traffic information and provide turn-by-turn voice direction for you to get to the desired location. You can enjoy playing DVDs, VCDs, bluetooth music, FM/AM radio tuner to enrich your journey. You can also connect your bluetooth-enable cell phone with this unit for hands-free calls and streaming audio to ensure a safe and cheerful journey. Your steering wheel control can still work after installation.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>