How to replace the factory unit with a new car stereo for 2006-2011 Honda CRV car ?

The direct target of this following article is to make you understand clearly about 2006-2011 Honda CRV car GPS Navigation System installation and removal.If your car matches the car brand type so that you can refer to steps to upgrade the car head unit.As a result, advanced car radio will make your driving more joyful and safe because of the various and multifunctional performances.

H208N安装效果图

Precautions:

1.Please park your car well and unplug the negative power cable to avoid any danger before start up any work.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional man.

 

2006-2011 Honda CRV car Radio Navigation System installation and removal

1. Pry out the speed control with a pry tool and Pull out the speed control gently, and set it side.

12

2. Unscrew two 10mm bolts under the radio,Off the trim panel with removal tool.

34

3.  pull out the panel and then put it on the top and unscrew two 10mm bolts on the radio.

56

4. Pull out the radio and Disconnect the harnesses behind the radio.

78

5. Remove the screws that secure the hazard warning switch to the radio, then remove the switch.

6. Install the hazard warining switch and firm the screws.

7. Make antennas and cables connected step by step as installation instructions show carefully.

8. Connect the new Seicane Honda CRV head unit to your dashboard, you should check your connections, the new unit’s position.

9. Check whether the unit is working without problem.

10. When the radio is working properly, push the radio into place, firm four removed bolts that are put aside, then make panel back on your new unit.

 

Hope you have no doubt with the installation and removal for 2006-2011 Honda CRV car stereo. If you still have something confused, please feel free to contact a dealer or professional for support. Surely you can check the link below for more information:

https://www.seicane.com/2-din-radio-android-gps-dvd-player-for-2006-2007-2008-2011-honda-crv-navigation-system-support-usb-sd-bluetooth-3g-wifi-aux-rearview-camera-mirror-link-obd2-dvr-s32789f

This 2006-2015 Honda CRV Car DVD Player comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP,support Split Screen Display etc. It replaces your factory radio with android based system of great utility and extendability. And your original factory steering wheel controls will work properly. With this car radio you will offer you a various ways to have a wonderful time during the driving and make your trips safer.

 

How to upgrade your car radio for 2003-2012 Toyota Corolla E120 BYD F3 ?

How to upgrade your car radio for 2003-2012 Toyota Corolla E120 BYD F3 ?

As we know,the car can service us for many years since we got it.At the same time,we’re facing some kinds of disadvantages from old model cars such as no advanced GPS system,no DVD player,no latest Android and no touchable screen,etc.That’s the reason i write down this article which related to the car GPS Navigation removal and installation for 2003-2012 Toyota Corolla E120 BYD F3. The upgraded car head unit will bring us lots of entertainments and convenience.

title image

Precautions:

1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2. A lever and a screwdriver need to be prepared before the installation.

 

The car GPS Navigation removal and installation for 2003-2012 Toyota Corolla E120 BYD F3.

Step 1 : Remove the dashboard and disconnect the connectors.

1-11-21-31-41-5

Step 2 : Use removal tool to take the A/C console gently and unplug the cables backwards.

2-12-2

Step 3 : Connect the marked red cable to rearview camera cable.

The Rearview camera cable is Optional selection, Please check link below for details:

https://www.seicane.com/ahd-night-vision-rearview-camera-waterproof-parking-assistance-system-for-car-radio-big-screen-sc92

3

Step 4 : Off the Door trim strip and A cylindrical panel.

4-14-24-3

Step 5 : Tap the GPS cable in proper place and get it out of A/C console position through inner way.

5

Step 6 : Place back the Door trim strip and A cylindrical panel well.

6

Step 7 : Carefully make the antennas and cables connected step by step as installation instructions

show.

Step 8 : Put the new head unit into the dash and hold it in trim panel with screws.

Step 9 : Follow steps 1-2 in reverse order to install back the remaining parts.

Step 10 : Check if everything is going well with your car.

 

Hope this article helps you a lot with the installation for 2003-2012 Toyota Corolla E120 BYD F3.If you still have problem about it, please feel free to contact a dealer or professional for support. Surely you can check the link below for more information: https://www.seicane.com/hd-touchscreen-radio-android-gps-navegac-o-para-2006-2012-toyota-corola-e120-byd-f3-com-bluetooth-music-usb-audio-aux-wi-fi-mirror-link-volante-control-s6934g

This 2003-2012 Toyota Corolla E120 BYD F3 GPS Navigation comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP,support Split Screen Display etc. It replaces your factory radio with android based system of great utility and extendability. You can download any applications in the android market for access to games, Skype, MSN, YouTube, twitter, E-Book, G-mail etc. This system also supports installation or removal of apps on RAM or SD optionally. With this car radio you will have a various ways to enjoy your driving with friends and family.

The Article is to share you a specific installation and removal guide for 2013 2014 Subaru XR Forester Impreza car stereo

For car owners, to have a multifunctional car radio can bring lots of entertainment on all trips. And also enhance the quality of living life. However,you might have a confusion that how can i replace my car stereo with a new expected one. Here below i would like to share you a specific installation and removal guide for 2013 2014 Subaru XR Forester Impreza car stereo from Seicane.

title image Precautions: 1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety. 2. A lever and a screwdriver need to be prepared before the installation. 2013 2014 Subaru XR Forester Impreza car radio installation guide 1. Take out of the glove. 1 2. Unplug the plug which connect the trim panel to the dash. 2 3. Pry the a/v vent panel with a lever. 3 4. Off the vent panel out of the dash. 4 5. Unplug all the connectors at the back of the vent panel. 5 6. Remove four screws holding the factory radio. 6 7. Gently take the factory radio out of the dashboard. 7 8. Unplug the connectors at the back. 8 9. Carefully make antennas and cables connected step by step as installation instructions show.

10. Put the new Seicane unit into your dashboard, double check if all connections are correct and you’d better have a tidy for the cables.

11. Check whether the new Seicane unit is working well.

12. If there is no problem, firm removed screws and bolts that are put aside, then make trim panel back on your new Seicane unit.

Wish the above installation guide for a 2013 2014 Subaru XR Forester Impreza GPS navigation is helpful. If there is any questions about the installation, please get help from a dealer or a professional. In addition, if you don’t have any suitable one, there is a recommended modern car radio for Subaru XR Forester Impreza head unit .Please check the link below for details.

http://www.seicane.com/9-inch-android-bluetooth-radio-for-2012-2013-2014-subaru-forester-with-3g-wifi-gps-navigation-system-tpms-dvr-obd-ii-rear-camera-aux-headrest-monitor-control-usb-sd-video-3g-wifi-capacitive-touch-screen-s081988

The Subaru XR Forester Impreza DVD Player with a large 9 inch 1024*600 multi-touch screen to facilitate,it is an ideal selection to upgrade your factory radio. The GPS function can direct you turn-by-turn and voice can avoid getting lost when you get to any unfamiliar location.You can also wirelessly sync your mobile phone using this unit to make and receive hands-free calls and stream music to have a journey filled with security and pleasure.

This 2013 2014  Subaru XR Forester Impreza car GPS navigation  comes with the latest Android Radio, RAM 2GB \ ROM 32GB \ Quad core , Support Carplay,RDS, SWC, XM radio APP etc. The steering wheel control still keep working after the installation of this excellent stereo.

The Article about 2015-2018 Toyota Sienna car stereo GPS navigation installation and removal guide

2015-2018 Toyota Sienna car stereo GPS navigation  installation and removal guide as below will show you how to correctly and quickly install a new radio instead of old one by yourself. Or you also can easily get support from a professional to fix it. title image

Precautions: 1. Please park the car in safe area and remove the negative cable on the vehicle battery before the removal. 2. A lever and a screwdriver need to be prepared before the installation.

2015-2018 Toyota Sienna car radio installation guide

1. Use a lever to pry along the plastic panel and remove it. 1 2. Off the panel under the 50 shift and hang it on the panel. 2 3. Remove the a/c control unit refer to the picture. 3 4. Unplug the back connectors of the a/c control unit. 4 5. Remove the screws holding the radio in place. 5 6. Take the factory radio out of the dashboard. 6 7. Disconnect the connectors at the back of factory radio.

8. Make antennas and cables connected step by step as instructions show, and be very careful when you are doing the installation.

9. Put the new Seicane unit into your dashboard and check whether your connections are correct, once it’s done, you’d better to have a tidy for the cables.

10. Check if the new Seicane unit is working well.

11. If there is no problem, place screws and then put trim panel back on the new Seicane unit.

 

Wish 2015-2018 Toyota Sienna car DVD Player installation and removal guide above is helpful.Surely you can ask for help if you could not handle it. I’d like to recommend you an excellent 2015-2018 Toyota Sienna car stereo from Seicane if you have not got suitable one yet. Go ahead and check the link below to have look:

http://www.seicane.com/10-2-inch-aftermarket-android-radio-gps-navigation-system-for-2015-toyota-sienna-with-capacitive-touch-screen-tpms-dvr-obd-ii-headrest-monitor-control-usb-sd-bluetooth-3g-wifi-video-aux-rear-camera-s082705

 

This 2015-2018  Toyota Sienna car GPS navigation  comes with come with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP etc. You can still keep the steering wheel control working after the installation of this fantastic stereo.

A detailed Installation guide for 2010 2011 VW Volkswagen Passat(MK7) car Radio with TV Tuner DVR USB SD 1080P Video DVD Player Bluetooth 3G WIFI

A detailed Installation guide for 2010 2011 VW Volkswagen Passat(MK7) car Radio with TV Tuner DVR USB SD 1080P Video DVD Player Bluetooth 3G WIFI

Nowadays for car owners,not only the comfortable and safe driving experience is quite important but also to have a thing with many features to offer lots of fun and convenience such as a new car stereo. The following is the step-by-step installation and removal guide of 2010 2011 VW Volkswagen Passat(MK7) car Radio from Seicane.

title image

Please note:

1.Before any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

2010 2011 VW Volkswagen Passat(MK7) car Radio installation guide

Step1: Please pry around the trim panel with a lever and loosen the trim panel with one hand while prying.When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.

1

Step2: Please unscrew the four screws at four corners.Then keep them well for the installation of a new head unit.

2

Step3: After the four screws are unscrewed, you can easily pull the factory radio out of the dash.

3

Step4: Please disconnect the wiring harness at the back of the factory radio before you put it aside.

4

Step 5: Connect the new Seicane stereo to the original wiring harness as the user manual or the wiring diagram shows.

5

Step 6: Turn on the new Seicane stereo to have a check if everything works well. Or please check whether all the cables are connected correctly.

6

Step 7: Put the new Seicane stereo into the dash and install the four screws.

Step 8: Install the trim panel into its original place.

 

l According to the guide reference above , you may have a general idea about how to install a new aftermarket 2010 2011 VW Volkswagen Passat (MK7) car DVD player. You can ask the dealer or a professional for help if any questions. Meanwhile, it’s vital for you to confirm that your new car GPS navigation can fit your car. Also you can check the link below for more details about this modern 2010 2011 VW Volkswagen Passat(MK7) car Radio from Seicane.

https://www.seicane.com/android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-skoda-seat-with-3g-wifi-mirror-link-obd2-bluetooth

This high-end VW Volkswagen Passat(MK7) car Radio comes with come with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP ,etc. You can be on safe and delightful trips if simply sync with the smart phone,so that you are able to make and receive hands-free calls and stream music. Go ahead to take it right now and have a wonderful time from now on!

 

This article is the guide about the removal and installation for 2014 Peugeot 2008 Car Radio.

For new generations,its a little bit hard to afford a car if they just graduate from campuses. That’s why they prefer to select the car brand with high effectiveness-cost. The 2014 Peugeot 2008 is the recommended car brand which is affordable,modern,suitable to become the transport vehicle for new members of society. To have a upgraded car radio is smart way to have much fun during the on/off business ways but also lots of entertainments for trips. This article is about the removal and installation introduction for 2014 Peugeot 2008 Car Radio.

H2590N安装效果图

Important Tips:

1.Please park your car well and unplug the negative power cable to avoid any danger before you start up any work.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

The steps of removal and installation introduction for 2014 Peugeot 2008 Car Stereo.

1st step: Remove the panel with plastic removal tool (1-1) and unplug the connectors back of it (1-2).

1-1

1-1

1-2

1-2

2nd step : Take the head unit out (2-1) and disconnect the connectors backwards (2-2).

2-1

2-1

2-2

2-2

3rd step : Off the screws with screwdriver (3-1) and remove the frame(3-2).

3-1

3-1

3-2

3-2

4th step : Pull the harness gently towards your side as picture show and put it aside.

4-1

4-1

4-2

4-2

4-3

4-3

5th step : Remove the A/C console (5-1) and unplug the connectors (5-2).

5-1

5-1

5-2

5-2

6th step : Follow the steps 5-1 in reverse order to replace a new car radio.

7th step : Check if the everything of the car radio is going well.

 

Hope this article helps you a lot with the installation for 2014 Peugeot 2008 DVD Player .If you still have problem about it, please feel free to contact a dealer or professional for support. Surely you can check the link below for more information: https://www.seicane.com/for-2014-peugeot-2008-radio-android-hd-touchscreen-with-aux-bluetooth-gps-navigation-system-carplay-support-1080p-video-h2590

This 2014 Peugeot 2008 GPS Navigation  comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP,support Picture in Picture / Split Screen Display etc. The car stereo is equipped with worldwide real-time navigation function of high accuracy. With current location, speed, mileage, landmark building display, 3D street view, destination search and turn-by-turn voice directions, it will be your perfect road companion.

https://www.seicane.com/android-gps-navegac-o-radio-para-2014-2016-peugeot-2008-com-hd-touchscreen-bluetooth-usb-wi-fi-aux-suporte-carplay-swc-tpms-h6270

Above 2014-2016 Peugeot 2008 car stereo comes with RAM 2GB \ ROM 32GB \ CPU Quad-core \ Plug and play \ Support RDS, SWC,Carplay Android Auto Support,support Picture in Picture / Split Screen Display etc. Certainly this one will also fit for your car if related car brand and bring you lots of enjoyable time with driving.

Sharing 2003+ VW Volkswagen Golf GTI MK6 GPS Navigation installation and removal Article

Sharing 2003+ VW Volkswagen Golf GTI MK6 GPS Navigation installation and removal guide

H202安装效果图

2003+ VW Volkswagen Golf GTI MK6 GPS Navigation installation and removal guide

 

More and more people wanna own a car to have wonderful time with friends or families during trips and holidays because of living life improvements.As a result, its important and prior solution that people would like to get a upgraded and multifunctional car radio. With experience of car stereo installation and removal for 2003+ VW Volkswagen Golf GTI MK6, i am pleasant to share all you guys the process details about it.

 

First of all, please note:

1.Please park the car in safe area and remove the negative cable on the vehicle battery before the removal.

2.A lever and a screwdriver need to be prepared before the installation.

3.Put things aside well to avoid to have negative impact for later operation.

 

2003+ VW Volkswagen Golf GTI MK6 GPS Navigation installation and removal guide

1. Use a lever to pry along the plastic panel and remove the dashboard.

1-1

1-1

1-2

1-2

2. Remove the screws holding the radio in place with a screwdriver.

2

3. Take the factory radio out of the dashboard and Unplug the back connectors of the a/c control unit.

3

4. Make the new head unit connectors backwards and the factory harness antennas and cables connected step by step as instructions show.(Please note the image 4-1 and 4-2)

4-1

4-1

4-2

4-2

4-3

4-3

5. Put the new Seicane unit into your dashboard and check whether your connections are correct, once it’s done, you’d better to have a tidy for the cables.

7

6. Check if the new Seicane unit is working well.

 

This touchscreen entertainment system features a built-in navigation system to guide you to those hard-to-find locations. In addition, the auxiliary input along with USB ports can provide a wide variety of input options. This DVD player can support steering wheel control,air condition system information,vehicle setting information display, and also the car parking system and original car camera. If you are interested,please check the link below for more information:

https://www.seicane.com/en/aftermarket-oem-autoradio-gps-estereo-para-2003-2011-vw-volkswagen-scirocco-golfe-polo-passat-jetta-tiguan-touran-sharan-sagitario-cadaver-cupra-assento-toledo-leon-alhambra-com-hd-touch-screen-obd-espelho-radio-dvd-player-s12840

 

This 2003+ VW Volkswagen Golf GTI MK6 DVD Player comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Build-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP etc. You can still keep the steering wheel control working perfectly after the installation of this fantastic stereo.

Meanwhile you also can check another link as following with little different parameters but still match car radio 2003+ VW Volkswagen Golf GTI MK6.

https://www.seicane.com/android-hd-1024-600-touch-screen-radio-for-2010-2011-vw-volkswagen-amarok-with-gps-navigation-wifi-bluetooth-music-mirror-link-steering-wheel-control-1080p-video-s129698e

Above 2003+ VW Volkswagen Golf GTI MK6 car stereo comes with RAM 2GB \ ROM 32GB \ CPU Quad-core \ Plug and play \ Support RDS, SWC,Carplay Android Auto Support etc. Certainly this one will works for your car and bring you joyful time with driving.