Top Install and upgrade tutorial for a 2012 Honda Civic GPS Navigation Bluetooth Car Radio Stereo Audio system

An ideal car radio should be compatible with both practical and entertainment features, so it can bring you great convenience and entertainment. If you think your car radio’s functions are too limited, you might as well consider replacing your factory radio with a brand new car radio. This article aims to introduce the installation steps of a 2012 Honda Civic car radio from Seicane. If you own the same or similar dashboard, you can refer to these steps carefully.

2012 Honda Civic car radio after installation

2012 Honda Civic car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2012 Honda civic (LHD) car radio installation instruction

1. Remove the automotive oil table top panel with plastic knife.

Remove the automotive oil table top panel with plastic knife

Remove the automotive oil table top panel with plastic knife

2. Remove the screws under the original car CD.

Remove the screws under the original car CD

Remove the screws under the original car CD

3. Take the original radio out of the dash.

Take the original radio out of the dash

Take the original radio out of the dash

4. Pull the plugs at the back of the original radio.

Pull the plugs at the back of the original radio

Pull the plugs at the back of the original radio

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original car radio’s plugs.

8. Put the new Seicane car radio into the dash.

9. Turn on the new Seicane car radio and check whether the unit is working properly. If not, please check whether all the cables are connected correctly.

10. Install screws and the panel, and put everything into their original place.

 

So now do you have a general understanding of the whole removal and installation steps of a car radio? If you still think it hard to install such a car radio by yourself, it is sincerely suggested that you should seek help from your dealer, someone experienced or a professional. Or you can straightly go to a car radio upgrade center and make the new car radio installed by a professional technician. Additionally, if you are still looking for a suitable car radio but have no ideas, here I would like to share a remarkable 2012 Honda Civic car radio from Seicane with you. For more details, please click:

https://www.seicane.com/seicane-s128201-android-radio-gps-car-audio-system-for-2012-honda-civic-with-cd-dvd-player-bluetooth-music-3g-wifi-mirror-link-obd2-hd-multi-touch-capacitive-screen

This car radio is running on the stable Android 6.0 operation system and a powerful quad-core CPU processor to enhance its capabilities and performance.

With this car radio installed in your car, you will be able to get access to a lot of practical and entertainment features, which can greatly improve your in-car life.

As for the 3D GPS navigation function, what you cannot ignore is that with its help, you can easily know your current locations and accurately find the right way to arrive at any locations you would like to go to according to turn-by-turn directions and voice prompts. And this unit comes with dual zone function, which allows you to listen to your favorite music while navigating.

Through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you can freely dial, answer, reject and mute Bluetooth hands-free phone calls as well as Bluetooth streaming music from your phone.

If you like this unit, just don’t hesitate to add it to your shopping cart. Good luck!

How to Install a 2014 2015 2016 Subaru Forester Car Stereo with Bluetooth GPS System

2014 2015 2016 Subaru Forester car radio after installation

After you get an ideal car stereo, have you considered installing it by yourself? If yes, you can follow a related car radio installation guide to help you deal with the installation. If it is the first time for you to install the new car radio, it is highly suggested that you should arrange a technician to help you. The following is a 2014 2015 2016 Subaru Forester car radio installation instruction from Seicane, which can be taken as your reference.

2014 2015 2016 Subaru Forester car radio after installation

2014 2015 2016 Subaru Forester car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2014 2015 2016 Subaru Forester car radio installation instruction

1. Use a plastic removal tool to pry the trim panel of the original car radio.

Use a plastic removal tool to pry the trim panel of the original car radio

Use a plastic removal tool to pry the trim panel of the original car radio

2. Disconnect the connectors at the back of the trim panel.

Disconnect the connectors at the back of the trim panel

Disconnect the connectors at the back of the trim panel

3. Use a screwdriver to unscrew all the screws that are holding the original car radio in the dashboard.

Use a screwdriver to unscrew all the screws that are holding the original car radio in the dashboard

Use a screwdriver to unscrew all the screws that are holding the original car radio in the dashboard

3-1

3-1

4. Gently take the original car radio out from the dashboard.

Gently take the original car radio out from the dashboard

Gently take the original car radio out from the dashboard

5. Disconnect the connectors and cables at the back of the original car radio.

Disconnect the connectors and cables at the back of the original car radio

Disconnect the connectors and cables at the back of the original car radio

6. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit

Check all the accessories for the new Seicane head unit

7. Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces.

Make the original car's connector plug to the new car radio's power connector. And Make sure the rest of connectors and cables are plugged to the radio's right interfaces

Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces

8. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

9. Make the connector plug to the back of the trim panel of the new car radio.

Make the connector plug to the back of the trim panel of the new car radio

Make the connector plug to the back of the trim panel of the new car radio

10. Carefully place the new car radio in the dashboard.

11. Put everything into their original place. All the installation is done.

 

Don’t worry if you come across any problems before installation. To solve these problems, you may seek help from your dealer, someone experienced or a professional.

And before installation, it is very essential for you to pick an ideal car radio for your beloved car radio. If you don’t know which kind of car radio can fit your car well, you can refer to the following link which is a remarkable 2014 2015 2016 Subaru Forester car radio from Seicane, Here comes the link, please click:

https://www.seicane.com/android-2014-2015-2016-subaru-forester-bluetooth-radio-gps-navigation-system-with-mirror-link-tpms-obd-dvr-rearview-camera-tv-4g-wifi-flash-cpu-rds-s169108

If you install this powerful car radio in your car, undoubtedly you will get access to numerous comprehensive features in your car, mainly including 3D GPS navigation system, FM/AM radio, Bluetooth hands-free phone calls, Bluetooth streaming music, AUX, file management, etc.

Thanks to the high-end 3D GPS navigation system, you can quickly locate where you are and accurately navigate to your ideal destinations according to turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating.

Hands-free phone calls and Bluetooth streaming music are both available as long as you realize the connection between your Bluetooth-enabled mobile phone and this car radio under the wireless Bluetooth technology.

Just add this unit to your shopping cart if you like this car radio.

How to quick Install and Upgrade a 2009 2010 2011 2012-2016 NISSAN NV200 Radio GPS Sat Nav Bluetooth Car Stereo

2009 2010 2011 2012-2016 NISSAN NV200 car radio after installation

If your factory radio is too out-dated, in my opinion, it is wise of you to replace your factory radio with a brand new multifunctional car radio so that you can enjoy more convenience and enjoyment as well as embrace a brand new driving experience. The following is a 2009 2010 2011 2012-2016 NISSAN NV200 car radio installation instruction from Seicane which I would like to share with you. If you own the same or similar dashboard, you’d better refer to this instruction.

2009 2010 2011 2012-2016 NISSAN NV200 car radio after installation

2009 2010 2011 2012-2016 NISSAN NV200 car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2009 2010 2011 2012-2016 NISSAN NV200 car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Grab the ashtray and take it out.

Grab the ashtray and take it out

Grab the ashtray and take it out

3. Remove the metal plate from the bottom.

Remove the metal plate from the bottom

Remove the metal plate from the bottom

4. Release this panel.

Release this panel

Release this panel

5. Push the button upwards to unsnap it.

Push the button upwards to unsnap it

Push the button upwards to unsnap it

6. Take out this panel softly.

Take out this panel softly

Take out this panel softly

7. Unscrew two screws fixed the radio frame.

Unscrew two screws fixed the radio frame

Unscrew two screws fixed the radio frame

8. Get your nails underneath to click off the radio frame.

Get your nails underneath to click off the radio frame

Get your nails underneath to click off the radio frame

8-1

8-1

9. Unscrew the screws holding the radio on the dashboard.

Unscrew the screws holding the radio on the dashboard

Unscrew the screws holding the radio on the dashboard

10. Take out the original car stereo and disconnect the connectors at the back of the stereo.

11. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

12. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

13. Connect the Seicane car stereo to your original stereo’s plugs.

14. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

15. Put the new Seicane car stereo into the dash.

16. Put everything into their original place. All the installation is done.

 

Wish the above installation steps can be helpful for you. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard to install the new car radio by yourself, you can directly ask a professional technician to help you with the installation. Besides, it is very essential for you to pick an ideal car radio. If you have no ideas, you can check out the following link which is an amazing 2009 2010 2011 2012-2016 NISSAN NV200 car radio from Seicane.

https://www.seicane.com/android-hd-touchscreen-radio-for-2009-2016-nissan-nv200-gps-navigation-car-stereo-bluetooth-support-mirror-link-obd2-aux-3g-wifi-dvr-1080p-video-steering-wheel-control-s04109e

This car radio is loaded with the new and stable Android 6.0 operation system and a powerful quad-core CPU processor to strengthen its capabilities, performance and enjoyment. And this unit comes with a lot of practical and entertainment features to meet your different needs in car.

Even though you don’t have a good sense of directions, under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you can easily know your current locations and find the right way to reach any locations you would like to go to. What’s more, thanks to this unit’s dual zone function, you can freely listen to car radio, USB or SD card music playback under GPS mode.

Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, you can connect your Bluetooth-enabled mobile phone to this car radio, so you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from phone music playlists.

Wish you like this unit and good luck to you.