How to remove and upgrade a 1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215 CL600 CL550 CL55 AMG GPS Sat Nav Bluetooth Car Stereo Installation

1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) GPS Bluetooth Car Stereo after installation

Nowadays, there is a trend that more and more car owners would like to replace their factory radio with a new aftermarket car radio, which can help them gain convenience and entertainment so as to enrich their in-car life. The following is a 1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) car radio installation guide from Seicane for a 1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) car radio. If you have the same or similar dashboard, you may read it carefully to deal with the installation.

1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) GPS Bluetooth Car Stereo after installation

1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) GPS Bluetooth Car Stereo after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Place the key in the ignition, set the parking brake and shift to a lower gear depressing the brake.

3. Open up the pocket down below the AC control and remove two T20 Torx screws on the two corners. Then remove the pocket.

Open up the pocket down below the AC control and remove two T20 Torx screws on the two corners. Then remove the pocket

Open up the pocket down below the AC control and remove two T20 Torx screws on the two corners. Then remove the pocket

4. Grasp the bottom of the radio trim panel while prying the edges of the panel up along the sides of the dash. Then remove the panel.

Grasp the bottom of the radio trim panel while prying the edges of the panel up along the sides of the dash. Then remove the panel

Grasp the bottom of the radio trim panel while prying the edges of the panel up along the sides of the dash. Then remove the panel

5. Remove four T20 Torx screws that are holding the radio on the dashboard.

Remove four T20 Torx screws that are holding the radio on the dashboard

Remove four T20 Torx screws that are holding the radio on the dashboard

6. Pull the car radio out from the dash.

Pull the car radio out from the dash

Pull the car radio out from the dash

7. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio

Disconnect the connectors and cables at the back of the radio

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

Before installation, please make clear every detailed step. If you have any doubts, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Besides, if you still think it hard for you to install the new car radio, you can directly go to a car radio upgrade center and get the new car radio installed by a professional. Anyway, before installation, please carefully pick an ideal car radio for your beloved car. Here I would like to share a remarkable 1998 1999 2000 2001-2005 Mercedes-Benz CL-Class W215(CL600, CL550, CL55 AMG) car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-radio-hd-touchscreen-gps-navigation-for-1998-2005-mercedes-benz-cl-class-w215-cl600-cl550-cl55-amg-with-bluetooth-music-audio-aux-usb-wifi-steering-wheel-control-mirror-link-1080p-s6913g

Based on the advanced Android 8.0 operation system and a high-quality eight-core CPU processor, this all-in-one car radio can replace your factory radio because of its higher and better performance and configuration.

Thanks to the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you. So you can gain great convenience and entertainment.

Additionally, thanks to the worldwide real-time GPS navigation system, you are able to know where you are currently and get the most suitable route option to reach your desired destinations. And this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

If you like this car radio, don’t hesitate to add it to your shopping cart. Good luck!

How to Quick Remove and Upgrade 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 GPS Navigation Touch Screen WIFI Radio DVD Player

2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car stereo after installation

Do you yearn for upgrading your factory radio with a new multi-functional car stereo on your own? If you would like to have a try, you just need to remove your original car radio and install a new car radio under the correct installation guide. The following is a 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide carefully.

2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car stereo after installation

2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 Bluetooth GPS Car Stereo Installation Guide

1. The original car radio.

The original car radio

The original car radio

2. Start from the bottom shifter. Remove the shifter and disconnect the connector at the back of it.

Start from the bottom shifter. Remove the shifter and disconnect the connector at the back of it

Start from the bottom shifter. Remove the shifter and disconnect the connector at the back of it

2-1

2-1

3. Remove the center button for the heater control panel.

Remove the center button for the heater control panel

Remove the center button for the heater control panel

3-1

3-1

4. Gently remove the heater control panel.

Gently remove the heater control panel

Gently remove the heater control panel

5. Disconnect the connectors at the back of the heater control panel.

Disconnect the connectors at the back of the heater control panel

Disconnect the connectors at the back of the heater control panel

6. Underneath the original car radio, there are four screws, just remove them so as to take out the original car radio.

Underneath the original car radio, there are four screws, just remove them so as to take out the original car radio

Underneath the original car radio, there are four screws, just remove them so as to take out the original car radio

6-1

6-1

7. Make the new car stereo clip into the original air vent.

Make the new car stereo clip into the original air vent

Make the new car stereo clip into the original air vent

8. Make sure that all connectors and cables are plugged to each other correctly.

Make sure that all connectors and cables are plugged to each other correctly

Make sure that all connectors and cables are plugged to each other correctly

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

8-1

8-1

9. Well put the new car stereo into the dashboard.

Well put the new car stereo into the dashboard

Well put the new car stereo into the dashboard

10. Plug the connectors to the heater control panel’s interfaces.

Plug the connectors to the heater control panel's interfaces

Plug the connectors to the heater control panel’s interfaces

11. Place the panel to the original place and fix the screw. And put the shifter back, make sure the connector is connected back as well.

Place the panel to the original place and fix the screw. And put the shifter back, make sure the connector is connected back as well

Place the panel to the original place and fix the screw. And put the shifter back, make sure the connector is connected back as well

11-1

11-1

 

Wish the above installation guide can do some help for you. If you come across any problems, you can seek help from your dealer, communicate with someone experienced or turn to a professional for help. Additionally, if you are afraid of making damage to either your car radio or your car, you can also directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. While for the selection of an ideal car radio, if you have no ideas, here I would like to share an amazing 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car stereo from Seicane with you. For more details, please click:

https://www.seicane.com/android-2000-2007-toyota-corolla-hd-touch-screen-radio-dvd-player-gps-navigation-bluetooth-music-wifi-mirror-link-steering-wheel-control-rearview-camera-1080p-video-s126002e


This amazing car stereo can be regarded as one of the best road companions for you since it comes with both practical and entertainment features.

With the guidance of the high-end 3D GPS navigation system, you are able to easily know your current locations and find the best route t o reach your ideal destinations through turn-by-turn directions and voice prompts. Besides, this unit comes with dual zone function which enables you to listen to your favorite music while navigating.

Additionally, under the wireless Bluetooth technology, you are able to get access to Bluetooth hands-free phone calls and Bluetooth streaming music from your mobile phone as long as you connect your Bluetooth-enabled mobile phone to this unit. Therefore, you can gain both convenience and enjoyment thanks to this car stereo.

Don’t hesitate to take this unit right now if you like it.

The Quick Install and upgrade Tutorial for a Universal Toyota Nissan KIA Bluetooth GPS Sat Nav WIFI Car Radio

Universal Toyota Nissan KIA car radio after installation

With the rapid development of technology, nowadays more and more car owners tend to remove their outdated factory radio and install a new multifunctional car radio to enhance their car’s capabilities so as to upgrade their in-car life. If you also want to upgrade your in-car life, you can consider replacing your factory radio with a brand new multifunctional car radio. The following is an easy-to-understand Universal Toyota Nissan KIA car radio installation guide from Seicane, which can be taken as your reference if you own the same or similar dashboard.

Universal Toyota Nissan KIA car radio after  installation

Universal Toyota Nissan KIA car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

Universal Toyota Nissan KIA car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Prepare a flat plastic removal tool and use it to pry the air vent.

Prepare a flat plastic removal tool and use it to pry the air vent

Prepare a flat plastic removal tool and use it to pry the air vent

3. Gently remove the air vent and put it aside.

Gently remove the air vent and put it aside

Gently remove the air vent and put it aside

4. Use a screwdriver to remove the four screws that are holding the car radio.

Use a screwdriver to remove the four screws that are holding the car radio

Use a screwdriver to remove the four screws that are holding the car radio

5. Gently pull the original car radio out from the original car radio.

Gently pull the original car radio out from the original car radio

Gently pull the original car radio out from the original car radio

6. Disconnect all the connectors and cables at the back of the original car radio.

Disconnect all the connectors and cables at the back of the original car radio

Disconnect all the connectors and cables at the back of the original car radio

7. Remove the original car radio fascia since you will use it later.

Remove the original car radio fascia since you will use it later

Remove the original car radio fascia since you will use it later

8. Make the new car radio and the original fascia get together.

Make the new car radio and the original fascia get together

Make the new car radio and the original fascia get together

9. Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces.

Make the original car's connector plug to the new car radio's power connector. And Make sure the rest of connectors and cables are plugged to the radio's right interfaces

Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces

9-1

9-1

9-2

9-2

10. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

11. Carefully place the new car radio, tighten the screws that hold the car radio with a screwdriver.

Carefully place the new car radio, tighten the screws that hold the car radio with a screwdriver

Carefully place the new car radio, tighten the screws that hold the car radio with a screwdriver

12. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for you to some extent. If you have any doubts, please feel free to contact your dealer, communicates with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician from a car radio upgrade center to help you install the new car radio. Anyway, it is essential for you to select an ideal car radio first of all. If you have no ideas, you can refer to the following link which is a remarkable Universal Toyota Nissan KIA car radio from Seicane. For more details, please click:

https://www.seicane.com/android-universal-aftermarket-autoradio-gps-car-a-v-system-with-dvd-player-radio-rds-bluetooth-mirror-link-obd2-touch-screen-3g-wifi-steering-wheel-control-s6938g


This car radio is integrated with a wide range of comprehensive features to meet your different needs in your car, which mainly include 3D GPS navigation system, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, AUX, steering wheel control, USB/SD card connection, file management, etc.

With this car radio installed in your car, under the guidance of the worldwide real-time GPS navigation system, you are able to easily know your current locations and navigate to your desired destinations through the turn-by-turn directions and voice prompts. Besides, thanks to this unit’s dual zone function, you can also listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

Besides, under the wireless Bluetooth technology, this car radio enables you to pair your Bluetooth-enabled mobile phone with this car radio, so you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as freely listen to your favorite music streaming from your phone music playlists, which can add a lot of convenience and enjoyment to your journey.

What are you waiting for? If you like this unit, just add it to your shopping cart right now!

Installation and Upgrade tutorials for 2014 2015 2016 Subaru Forester GPS Navigation Bluetooth USB WIFI Car Stereo

2014 2015 2016 Subaru Forester Car Radio after installation

How hard is it for a car owner to remove his factory radio so as to install a new car radio? People who would like to enjoy more convenience and enjoyment in car may want to know the answer toward this question. As far as I am concerned, it is not complicated for you to remove your factory radio and install a new car radio under the guidance of a correct car radio installation instruction. The following is a 2014 2015 2016 Subaru Forester car radio installation instruction, which can be taken as your reference if you own the same or similar dashboard and would like to upgrade your factory radio.

2014 2015 2016 Subaru Forester Car Radio after installation

2014 2015 2016 Subaru Forester Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2014 2015 2016 Subaru Forester car radio installation instruction

1. Use a plastic removal tool to pry the trim panel of the original car radio.

Use a plastic removal tool to pry the trim panel of the original car radio

Use a plastic removal tool to pry the trim panel of the original car radio

2. Disconnect the connectors at the back of the trim panel.

Disconnect the connectors at the back of the trim panel

Disconnect the connectors at the back of the trim panel

3. Use a screwdriver to unscrew all the screws that are holding the original car radio in the dashboard.

Use a screwdriver to unscrew all the screws that are holding the original car radio in the dashboard

Use a screwdriver to unscrew all the screws that are holding the original car radio in the dashboard

3-1

3-1

4. Gently take the original car radio out from the dashboard.

Gently take the original car radio out from the dashboard

Gently take the original car radio out from the dashboard

5. Disconnect the connectors and cables at the back of the original car radio.

Disconnect the connectors and cables at the back of the original car radio

Disconnect the connectors and cables at the back of the original car radio

6. Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces.

Make the original car's connector plug to the new car radio's power connector. And Make sure the rest of connectors and cables are plugged to the radio's right interfaces

Make the original car’s connector plug to the new car radio’s power connector. And Make sure the rest of connectors and cables are plugged to the radio’s right interfaces

7. For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram.

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

For the further confirmation of the right connecting of all connectors and cables, you can refer to the following wiring diagram

8. Make the connector plug to the back of the trim panel of the new car radio.

Make the connector plug to the back of the trim panel of the new car radio

Make the connector plug to the back of the trim panel of the new car radio

9. Carefully place the new car radio in the dashboard.

10. Put everything into their original place. All the installation is done.

 

Wish the above installation instruction is helpful for you to some extent. If you encounter any difficulties and don’t know how to overcome them, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or for avoiding damage to either your car radio or your car, you can directly go to a car radio upgrade center so as to get the new car radio installed by a professional technician. Anyway, first of all, you have to pick an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is a great 2014 2015 2016 Subaru Forester car radio from Seicane.

https://www.seicane.com/android-hd-touchscreen-in-dash-radio-for-2014-2015-2016-subaru-forester-gps-navigation-bluetooth-music-usb-audio-system-support-backup-camera-digital-tv-1080p-video-dvr-steering-wheel-control-s169208g


This car radio is running on the most advanced and stable Android 8.0 operation system and a 8-core 1.5 GHz RK-PX5 A53 processor to enhance its capacities and performance. So this car radio can be regarded as one of the best replacements for your factory car radio.

With this car radio installed in your car, you can get access to the high-end 3D GPS navigation system, Bluetooth function,and other functions. Under the guidance of the turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system, you can easily locate where you are and gain the most suitable route option to reach your desired destinations. And thanks to this unit’s dual zone function, you can freely listen to your favorite music while navigating.

Additionally, without keeping your hands off the steering wheel, Bluetooth hands-free phone calls and Bluetooth streaming music are available for you as long as you connect your Bluetooth-enabled mobile phone and this car radio.

What are you waiting for? If you like this unit, you can add this unit to your shopping cart!

How to Install and Upgrade 1998 1999 2000 2001-2005 Mercedes-Benz S-Class W220 S280 S320 S350 S400 S430 S500 Bluetooth GPS Navigation Car Radio

1998 1999 2000 2001-2005 Mercedes-Benz S-Class W220 S280 S320 S350 S400 S430 S500 Car Radio after installation

If you are fed up with your factory radio, you can consider removing your factory radio and installing a new aftermarket car radio. This article is mainly about how to remove the factory radio and install a new multifunctional car radio for 1998 1999 2000 2001-2005 Mercedes-Benz S-Class W220 S280 S320 S350 S400 S430 S500. If you have the same or similar dashboard, you can refer to the following guide.

1998 1999 2000 2001-2005 Mercedes-Benz S-Class W220 S280 S320 S350 S400 S430 S500 Car Radio after installation

1998 1999 2000 2001-2005 Mercedes-Benz S-Class W220 S280 S320 S350 S400 S430 S500 Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1998 1999 2000 2001-2005 Mercedes-Benz S-Class W220 S280 S320 S350 S400 S430 S500 car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Place the key in the ignition, set the parking brake and shift to a lower gear depressing the brake.

3. Open up the pocket down below the AC control and remove two T20 Torx screws on the two corners. Then remove the pocket.

Open up the pocket down below the AC control and remove two T20 Torx screws on the two corners. Then remove the pocket

Open up the pocket down below the AC control and remove two T20 Torx screws on the two corners. Then remove the pocket

4. Grasp the bottom of the radio trim panel while prying the edges of the panel up along the sides of the dash. Then remove the panel.

Grasp the bottom of the radio trim panel while prying the edges of the panel up along the sides of the dash. Then remove the panel

Grasp the bottom of the radio trim panel while prying the edges of the panel up along the sides of the dash. Then remove the panel

5. Remove four T20 Torx screws that are holding the radio on the dashboard.

Remove four T20 Torx screws that are holding the radio on the dashboard

Remove four T20 Torx screws that are holding the radio on the dashboard

6. Pull the car radio out from the dash.

Pull the car radio out from the dash

Pull the car radio out from the dash

7. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio

Disconnect the connectors and cables at the back of the radio

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

Wish you can get some help from the above installation instruction. If you meet any problems you cannot deal with by yourself, you can seek help from your dealer, someone experienced or a professional. Or you can directly go to a car radio upgrade center to ask a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio. If you don’t know which kind of car radio can fit your car, you can refer to the following link which is a remarkable 1998 1999 2000 2001-2005 Mercedes-Benz S-Class W220 S280 S320 S350 S400 S430 S500 car radio from Seicane. For more details, you may click:

https://www.seicane.com/hd-touchscreen-radio-for-1998-2005-mercedes-benz-s-class-w220-s280-s320-s350-s400-s430-s500-android-gps-navigation-system-with-usb-wifi-bluetooth-mirror-link-1080p-obd2-steering-wheel-control-s6913g

This all-in-one car radio is loaded with the latest Android 8.0 operation system and a strong eight-core CPU processor, so with it installed in your car, you will enjoy its more stable operation, better performance and higher configuration.

Even you are not good at identifying directions, thanks to the worldwide real-time GPS navigation system, you are able to know your current locations and find the right way to reach your desired destinations. And with dual zone function, this unit enables you to listen to your favorite music while navigating, which won’t have any negative influence on GPS function.

Besides, both hands-free calls and streaming music are available as long as you connect this unit to your Bluetooth-enabled mobile phone. Therefore, you can sync your phone book so as to dial, answer, reject and mute Bluetooth hands-free calls as well as listen to Bluetooth streaming music.

Wish you like this unit and good luck to you!