Provided that you have a 2004 2005 2006 Toyota Corolla, would you like to replace your factory radio with a new multifunctional car radio? If yes, then an installation guide is very essential for you. Now please have a look at the following image, which is a remarkable 2004 2005 2006 Toyota Corolla car radio from Seicane after installation. If you have the same or similar dashboard, you can refer to the following 2004 2005 2006 Toyota Corolla car radio installation instruction.
Tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2004 2005 2006 Toyota Corolla car radio installation instruction
1. The original car radio.
2. Adjust the shifter lever.
3. Use the plastic removal tool to remove the panel and unplug the connector behind.
4. Grab the center nob, remove it and use a screwdriver to unscrew the hidden screw.
5. Remove the panel with a plastic removal tool, then unplug the connectors at the back of it.
6. Remove screws that are holding the radio.
7. Release the clips and take out the original car radio.
8. Disconnect connectors and cables at the back of the radio.
9. Check all the accessories for the new Seicane car stereo.
10. Connect the harnesses to the back of the new Seicane car stereo.
11. Connect the Seicane car stereo to your original stereo’s plugs.
12. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
13. Put the new Seicane car stereo into the dash.
14. Put everything into their original place. All the installation is done.
That’s the whole removal and installation process for a 2004 2005 2006 Toyota Corolla car radio. If you have any doubts, please feel free to consult your dealer, communicate with someone experienced or seek help from a professional. If you still think it hard for you to finish the whole process all by yourself, you can directly arrange a professional technician to help you install the new car stereo.
However, if you haven’t got an ideal car stereo yet, here I would like to introduce an amazing 2004 2005 2006 Toyota Corolla car radio from Seicane to you. For more details, please click:
This car radio’s operation system has been upgraded to the latest and stable Android 7.1 operation system and it comes with a powerful quad-core 1.6GHz RK PX3 processor.
You won’t get lost any longer even you are in an unfamiliar place or you don’t have a good sense of directions. When you turn on GPS navigation function, you will be able to quickly locate where you are and find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. And under GPS mode, you can freely listen to radio, USB or SD card music playback thanks to this unit’s dual zone function.
Besides, this unit’s built-in Bluetooth module enables you to get access to both Bluetooth-hands free phone calls and Bluetooth streaming music if you pair your Bluetooth-enabled mobile phone with this unit.
If you like this unit, just add it to your shopping cart. Good luck to you!