As a car owner, you must want to have a more convenient and comfortable car interior environment as well as take your in-car life up a level. To achieve this goal, you can think about replacing your factory radio with a brand new aftermarket car radio. The following is a 2006 2007 2008 2009 2010-2012 TOYOTA RAV4 car radio installation instruction from Seicane. If you own the same or similar dashboard, you can read this instruction and take it as a reference.
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009 2010-2012 TOYOTA RAV4 car radio installation instruction
1. The original car radio.
2. Remove the panel by using plastic removal tool.
3. Unplug the hazard warning lights.
4. Remove the left panel and unplug the switch.
5. Unplug the switch.
6. Remove four screws.
7. Pull out the factory radio.
8. The back of the original car radio.
9. Remove 8 screws from original car radio.
10. Remove 2 screws at the top of the new radio.
11. Install 8 screws to new car radio.
12. Plug into factory plugs.
13. All plugs after connection.
14. Check all the accessories for the new Seicane car radio.
15. Connect the harnesses to the back of the new Seicane car radio.
16. Connect the Seicane car radio to your original car radio ‘s plugs.
17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
18. If the new Seicane car radio works well, put it into the dash.
19. Put everything into their original place, and all the installation is done.
Wish the above installation steps can be helpful for you. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car or your car radio, you can directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. Anyway, it is essential for you to select an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is a remarkable 2006 2007 2008 2009 2010-2012 TOYOTA RAV4 car radio from Seicane.
Upgraded to the latest Android 7.1 operation system, a high-quality quad-core CPU processor and 2GB RAM, this car radio can provide its users with best services thanks to its enhanced capabilities, improved configurations and higher performance.
Thanks to the worldwide real-time GPS navigation system of high accuracy, you are able to easily and quickly locate where you are now and find the right way to reach any locations you would like to go to according to turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating, and the music will automatically switch to GPS voice.
Besides, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to streaming music from your mobile phone without taking hands off the steering wheel.
Wish you like this unit and good luck to you!