The Ultimate Instruction on Upgrading a 2001 2002 2003 2004 2005-2011 Nissan MP300 NP300 Car Radio with DVD Player Bluetooth GPS Navigation System

2001 2002 2003 2004 2005-2011 Nissan MP300 NP300 Car Radio after installation

As a car owner of 2001 2002 2003 2004 2005-2011 Nissan MP300 NP300, if you would like to improve your in-car life, you can think about replacing your factory radio with a brand new aftermarket car radio. And if you would like to try to install the new car radio by yourself, you can follow a correct car radio removal and installation instruction to deal with the installation. The following is a 2001 2002 2003 2004 2005-2011 Nissan MP300 NP300 car radio installation instruction from Seicane, which can be regarded as your reference if you own the same or similar dashboard.

2001 2002 2003 2004 2005-2011 Nissan MP300 NP300 Car Radio after installation

2001 2002 2003 2004 2005-2011 Nissan MP300 NP300 Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2001 2002 2003 2004 2005-2011 Nissan MP300 NP300 car radio installation instruction

1. Pry around the edges of the trim panel with removal tools.

Pry around the edges of the trim panel with removal tools

Pry around the edges of the trim panel with removal tools

2. Take the trim panel out of the dash.

Take the trim panel out of the dash

Take the trim panel out of the dash

3. Disconnect all the connectors at the back of the panel.

Disconnect all the connectors at the back of the panel

Disconnect all the connectors at the back of the panel

4. Unscrew all the screws holding the original car radio in place with a screwdriver.

Unscrew all the screws holding the original car radio in place with a screwdriver

Unscrew all the screws holding the original car radio in place with a screwdriver

5. Gently take the original car radio out of the dash.

6. Disconnect all connectors at the back of the original car radio.

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10.Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11.Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for you to deal with the installation.If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly go to a car radio upgrade center to ask a professional technician to help you install the new car radio.

If you are still searching for an ideal car radio for your beloved car, you might as well check out the following link which is a remarkable 2001 2002 2003 2004 2005-2011 Nissan MP300 NP300 car radio from Seicane. For more details, please click:

https://www.seicane.com/android-gps-navigation-system-for-2001-2011-nissan-mp300-np300-with-radio-dvd-player-mirror-link-touch-screen-obd2-dvr-tv-3g-wifi-usb-sd-rearview-camera-bluetooth-1080p-video-s166226

This remarkable car radio can be regarded as one of the best replacements for your factory radio in 2001 2002 2003 2004 2005-2011 Nissan MP300 NP300.

The worldwide real-time GPS navigation system is specially built in this car radio, which enables you to easily locate where you are and find the right way to reach your desired destinations through turn-by-turn directions and voice prompts. Besides, this unit comes with dual zone function,so you can freely listen to your favorite music while navigating.

Additionally, under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this car radio so as to get access to both Bluetooth hands-free phone calls and Bluetooth streaming music without taking your hands off the steering wheel.

If you like this unit, just add it to your shopping cart. Good luck to you!

An Easy-to-understand Upgrading Guide of a 2006 2007 2008 2009 2010 Ford Explorer(U251) Car Stereo with Bluetooth WiFi GPS Navigation

2006 2007 2008 2009 2010 Ford Explorer(U251) Car Stereo after installation

If you are not satisfied with your factory radio since it is not up-to-date enough to be compatible with some upgraded or modern features, you can consider replacing it with a new aftermarket car radio. If you would like to try to install the new car radio by yourself, you can refer to a related installation instruction. The following is a 2006 2007 2008 2009 2010 Ford Explorer(U251) car radio installation instruction from Seicane, which can be taken as your reference if you own the same or similar dashboard.

2006 2007 2008 2009 2010 Ford Explorer(U251) Car Stereo after installation

2006 2007 2008 2009 2010 Ford Explorer(U251) Car Stereo after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006 2007 2008 2009 2010 Ford Explorer(U251) car radio installation instruction

Step 1: Remove the trim around gear shifter.

Remove the trim around gear shifter

Remove the trim around gear shifter

Step 2: Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver

Remove screws securing center console lid with a screwdriver

Step 3: Remove the center console trim.

Remove the center console trim

Remove the center console trim

Step 4: Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides

Remove console side panels on both driver and passenger sides

Step 5: Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls

Remove bolts securing radio bezel and AC controls

Step 6: Unplug AC controls (from passenger side).

Unplug AC controls (from passenger side)

Unplug AC controls (from passenger side)

Step 7: Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls

Remove the radio bezel and AC controls

Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Step 9: Check all the accessories for the new Seicane radio.

Check all the accessories for the new Seicane radio

Check all the accessories for the new Seicane radio

Step 10: Connect the harnesses to the back of the new Seicane radio.

Connect the harnesses to the back of the new Seicane radio

Connect the harnesses to the back of the new Seicane radio

Step 11: Connect the Seicane radio to your original car radio’s plugs, and put the new Seicane radio into the dash.

Step 12: Turn on the new Seicane radio and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

 

Don’t be over worried even if you encounter any problems and don’t know how to deal with these problems. To solve these problems, you can seek help from your dealer, someone experienced or a professional. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio in your car. However, if you are still looking for an ideal car radio for your beloved car, here I would like to share a 2006 2007 2008 2009 2010 Ford Explorer(U251) car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-hd-touchscreen-car-stereo-radio-dvd-player-for-2006-2010-ford-explorer-u251-head-unit-gps-navigation-system-bluetooth-phone-wifi-support-backup-camera-1080p-video-obdii-dvr-steering-wheel-control-s6949

This all-in-one car radio is loaded with the most advanced Android 7.1 operation system and a high-quality quad-core CPU processor to enhance its capabilities and performance.

With the assistance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to easily and quickly locate where you are and find the most suitable way to reach your desired destinations. Additionally, this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

Besides, under the wireless Bluetooth technology, by pairing your Bluetooth-enabled mobile phone with this unit, you can freely dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your mobile phone with keeping your hands on the steering wheel and your eyes on the road ahead.

If you like this unit, just add it to your shopping cart. Good luck!

How to Install a 2005 2006 2007 2008 2009-2011 KIA Rio Rio5 Bluetooth Car Radio Stereo Head Unit Perfectly

2005 2006 2007 2008 2009-2011 KIA Rio Rio5 Bluetooth Car Radio after installation

Are you keen on pursuing high-quality in-car life? If yes, you must make your car be equipped with upgraded and new features. Under this circumstance, you can replace your old factory radio with a brand new multifunctional car radio. And as for the installation, if you have any related installation experience, you can also try to finish the whole installation process under a correct installation guide. The following is a 2005 2006 2007 2008 2009-2011 KIA Rio Rio5 car radio installation instruction from Seicane which can be taken as your reference if you own the same or similar dashboard.

2005 2006 2007 2008 2009-2011 KIA Rio Rio5 Bluetooth Car Radio after installation

2005 2006 2007 2008 2009-2011 KIA Rio Rio5 Bluetooth Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005 2006 2007 2008 2009-2011 KIA Rio Rio5 car radio installation instruction

1. Pry around the edges of the trim panel with a lever.

Pry around the edges of the trim panel with a lever

Pry around the edges of the trim panel with a lever

2. Remove the trim panel.

Remove the trim panel

Remove the trim panel

3. Disconnect all the connectors of the trim panel.

Disconnect all the connectors of the trim panel

Disconnect all the connectors of the trim panel

4. Unscrew all the screws holding the original car radio in place with a screwdriver.

Unscrew all the screws holding the original car radio in place with a screwdriver

Unscrew all the screws holding the original car radio in place with a screwdriver

5. Gently take the original car radio out of the dashboard.

Gently take the original car radio out of the dashboard

Gently take the original car radio out of the dashboard

6. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio

Disconnect all connectors at the back of the original car radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash. 12. Put everything into their original place. All the installation is done.

 

That’s how about how to remove and install a 2005 2006 2007 2008 2009-2011 KIA Rio Rio5 car radio. If you have any doubts, please feel free to contact your dealer for seeking advice or turn to a professional for help. Or during the installation, you can arrange a professional technician to help you alongside.

Besides, to help you better select an ideal car radio, here I would like to recommend a remarkable 2005 2006 2007 2008 2009-2011 KIA Rio Rio5 car radio from Seicane to you. You may click the link below for more details.

https://www.seicane.com/android-gps-radio-bluetooth-dvd-for-2005-2011-kia-rio-rio5-with-touchscreen-navigation-system-obd2-dvr-rearview-camera-tv-1080p-video-usb-sd-canbus-3g-wifi-steering-wheel-control-quad-core-cpu-mirror-link

This amazing 2005 2006 2007 2008 2009-2011 KIA Rio Rio5 car radio, based on the latest Android 7.1 operation system and a high-quality quad-core CPU processor, you are able to embrace a much smoother, faster and easier operation experience than ever before.

With this all-in-one car radio installed in your car, you are able to get access to a wide range of practical and entertainment features, mainly including the high-end 3D GPS navigation system, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, DVD player, AUX, file management, etc.

Additionally, this car radio also supports some optional features which can be added to this unit according to your preference and requirements, such as car DVR, backup camera, TPMS, DAB and so on forth.

Thanks to these multiple features, you will be able to have a more convenient, comfortable and relaxing in-car life than ever before. If you like this unit, just add it to your shopping cart right now. Good luck!

How to Easily Upgrade a 2005 2006 2007 2008 2009-2013 Alfa Romeo 159 Sportwagon Car Stereo with DVD Player Bluetooth GPS Navigation

2005 2006 2007 2008 2009-2013 Alfa Romeo 159 Sportwagon Car Stereo after installation

Whether you would like to catch up with the trend or just upgrade your driving experience, it is a good idea for you to remove your factory radio and install a brand new multifunctional car radio. Since most car radios are plug and play, the car radio removal and installation is not complicated. The following is a concise 2005 2006 2007 2008 2009-2013 Alfa Romeo 159 Sportwagon car radio installation instruction from Seicane. If you own the same or similar dashboard, you can refer to this instruction.

2005 2006 2007 2008 2009-2013 Alfa Romeo 159 Sportwagon Car Stereo after installation

2005 2006 2007 2008 2009-2013 Alfa Romeo 159 Sportwagon Car Stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005 2006 2007 2008 2009-2013 Alfa Romeo 159 Sportwagon car radio installation instruction

1. Firstly please make extractors or directly buy some for help with your removal.

Firstly please make extractors or directly buy some for help with your removal

Firstly please make extractors or directly buy some for help with your removal

2. There are four slots in the original car radio. Insert these extractors into the holes of the radio.

There are four slots in the original car radio. Insert these extractors into the holes of the radio

There are four slots in the original car radio. Insert these extractors into the holes of the radio

2-1

2-1

3. Push the extractors away and pull the original radio firmly.

Push the extractors away and pull the original radio firmly

Push the extractors away and pull the original radio firmly

3-1

3-1

4. Remove aerial and connectors from the back of the radio.

5. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

6. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

7. Connect the Seicane car stereo to your original car radio’s plugs.

8. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. If everything is OK, make everything return to the original place.

 

Wish you can get some help from the above installation instruction. If you have any questions, don’t hesitate to seek help from your dealer, someone experienced or turn to a professional. Or  you can directly go to a car radio upgrade center and have the car radio installed by a professional technician.

To help you select an ideal car radio for your beloved car, here I would like to share an amazing 2005 2006 2007 2008 2009-2013 Alfa Romeo 159 Sportwagon car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-hd-touchscreen-head-unit-for-2005-2013-alfa-romeo-159-sportwagon-radio-dvd-player-gps-navigation-system-music-bluetooth-4g-wifi-support-1080p-video-backup-camera-dab-dvr-aux-s018804

This all-in-one car radio comes with comprehensive features to meet your different needs in car. And one of the highlights you cannot ignore is the high-end 3D GPS function. The worldwide real-time GPS navigation system is especially built in this unit, which enables you to locate where you are now and help you find the right way to reach any locations you would like to go to according to turn-by-turn directions and voice prompts. With dual zone function, this unit allows you to listen to your favorite music while navigating.

Additionally, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you without taking your hands off the steering wheel. So you will gain a lot of convenience and enjoyment.

Wish you like this unit and good luck to you!

How to Install a 2005 2006 2007 2008 2009-2012 Fiat Croma Car Radio Head Unit with Multi-touch Screen Bluetooth Navigation System

2005 2006 2007 2008 2009-2012 Fiat Croma Car Radio after installation

When you drive around an unfamiliar city, to reach a lot of locations with correct direction, a powerful GPS navigation system can do some help for you. And to relax yourself or your passengers, you can listen to radio, USB or SD card music, etc. To get these features, you can consider replacing your factory radio with a new aftermarket car radio. The following is a 2005 2006 2007 2008 2009-2012 Fiat Croma car radio installation instruction. If you own the same or similar dashboard, you can refer to this passage carefully.

2005 2006 2007 2008 2009-2012 Fiat Croma Car Radio after installation

2005 2006 2007 2008 2009-2012 Fiat Croma Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005 2006 2007 2008 2009-2012 Fiat Croma car radio installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

That’s all about the removal and installation process for a 2005 2006 2007 2008 2009-2012 Fiat Croma car radio. If you meet any problems, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to install the new car radio, you can also directly arrange a professional to help you install the new car radio.

Additionally, to help you select an ideal car radio, you can refer to the following link which is an amazing 2005 2006 2007 2008 2009-2012 Fiat Croma car radio from Seicane. For more details, please click:

https://www.seicane.com/android-hd-touchscreen-radio-head-unit-for-2005-2012-fiat-croma-car-dvd-player-gps-navigation-system-bluetooth-phone-wifi-support-digital-tv-dvr-usb-steering-wheel-control-s018829

This car radio is upgraded to the latest Android 7.1 operation system, a powerful quad-core CPU processor and 2GB RAM  to enhance its capabilities and performance. So it can regarded as one of the best replacements for your factory radio in 2005 2006 2007 2008 2009-2012 Fiat Croma.

The worldwide real-time GPS navigation system is specially built in this car radio, so you can make full use of it to locate where you are and find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. And while navigating, you can freely listen to your favorite music while navigating thanks to this unit’s dual zone function.

Besides, under Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this car radio, which makes Bluetooth hands-free phone calls and Bluetooth streaming music are both available for you.

Wish you like this unit and good luck to you!

A Brief Introduction on a 2006 2007 2008 2009 2010-2012 TOYOTA RAV4 Car Radio Removal and Installation with an Aux Input Stereo GPS Navigation

2006 2007 2008 2009 2010-2012 TOYOTA RAV4 Car Radio after installation

As a car owner, you must want to have a more convenient and comfortable car interior environment as well as take your in-car life up a level. To achieve this goal, you can think about replacing your factory radio with a brand new aftermarket car radio. The following is a 2006 2007 2008 2009 2010-2012 TOYOTA RAV4 car radio installation instruction from Seicane. If you own the same or similar dashboard, you can read this instruction and take it as a reference.

2006 2007 2008 2009 2010-2012 TOYOTA RAV4 Car Radio after installation

2006 2007 2008 2009 2010-2012 TOYOTA RAV4 Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006 2007 2008 2009 2010-2012 TOYOTA RAV4 car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Remove the panel by using plastic removal tool.

Remove the panel by using plastic removal tool

Remove the panel by using plastic removal tool

3. Unplug the hazard warning lights.

Unplug the hazard warning lights

Unplug the hazard warning lights

4. Remove the left panel and unplug the switch.

Remove the left panel and unplug the switch

Remove the left panel and unplug the switch

5. Unplug the switch.

Unplug the switch

Unplug the switch

6. Remove four screws.

Remove four screws

Remove four screws

6-1

6-1

7. Pull out the factory radio.

Pull out the factory radio

Pull out the factory radio

8. The back of the original car radio.

The back of the original car radio

The back of the original car radio

9. Remove 8 screws from original car radio.

Remove 8 screws from original car radio

Remove 8 screws from original car radio

9-1

9-1

10. Remove 2 screws at the top of the new radio.

Remove 2 screws at the top of the new radio

Remove 2 screws at the top of the new radio

10-1

10-1

11. Install 8 screws to new car radio.

Install 8 screws to new car radio

Install 8 screws to new car radio

12. Plug into factory plugs.

Plug into factory plugs

Plug into factory plugs

13. All plugs after connection.

All plugs after connection

All plugs after connection

13-1

13-1

14. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

15. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

16. Connect the Seicane car radio to your original car radio ‘s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. If the new Seicane car radio works well, put it into the dash.

19. Put everything into their original place, and all the installation is done.

 

Wish the above installation steps can be helpful for you. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car or your car radio, you can directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. Anyway, it is essential for you to select an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is a remarkable 2006 2007 2008 2009 2010-2012 TOYOTA RAV4 car radio from Seicane.

https://www.seicane.com/android-gps-navigation-dvd-player-car-radio-stereo-for-2006-2012-toyota-rav4-bluetooth-phone-music-player-usb-sd-wifi-support-obd2-tpms-dvr-backup-camera-s6947

Upgraded to the latest Android 7.1 operation system, a high-quality quad-core CPU processor and 2GB RAM, this car radio can provide its users with best services thanks to its enhanced capabilities, improved configurations and higher performance.

Thanks to the worldwide real-time GPS navigation system of high accuracy, you are able to easily and quickly locate where you are now and find the right way to reach any locations you would like to go to according to turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

Besides, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to streaming music from your mobile phone without taking hands off the steering wheel.

Wish you like this unit and good luck to you!