The Useful Tips on a 2014 Mazda Atenza GPS Bluetooth Car Radio Upgrade

2014 Mazda Atenza GPS Bluetooth Car Radio after installation

Do you eagerly want to have a modern multi-functional car radio to enjoy more convenience and enjoyment on the way? If your answer towards this question is “yes”, then you can consider replacing your factory radio with a new aftermarket car radio which can be compatible with a lot of modern features. If you have interest in finish the installation by yourself, you can find a step-by-step installation guide to help you. Here I would like to share a step-by-step 2014 Mazda Atenza car radio installation guide with you for your reference. Wish it can be help for you.

2014 Mazda Atenza GPS Bluetooth Car Radio after installation

2014 Mazda Atenza GPS Bluetooth Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2014 Mazda Atenza car radio installation guide

1.The original car radio.

The original car radio

The original car radio

2.Use a plastic removal tool to pry the trim part as the following pictures shows.

Use a plastic removal tool to pry the trim part as the following pictures shows

Use a plastic removal tool to pry the trim part as the following pictures shows

2-1

2-1

3.Pry the air vent with a plastic removal tool.

Pry the air vent with a plastic removal tool

Pry the air vent with a plastic removal tool

3-1

3-1

4.Remove the air vent, disconnect the connector at the back of it and put it aside.

Remove the air vent, disconnect the connector at the back of it and put it aside

Remove the air vent, disconnect the connector at the back of it and put it aside

4-1

4-1

5.Pop the radio trim panel.

Pop the radio trim panel

Pop the radio trim panel

6.Use a screwdriver to remove screws that fix the original car radio on teh dashboard.

Use a screwdriver to remove screws that fix the original car radio on teh dashboard

Use a screwdriver to remove screws that fix the original car radio on teh dashboard

7.Take out the original car radio from the dashboard.

Take out the original car radio from the dashboard

Take out the original car radio from the dashboard

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

Before installation, please make clear every detailed step. If you meet any difficulties and don’t know how to overcome them, you can seek help from your dealer, someone experienced or a professional. Of you can directly go to a car radio upgrade center to ask a professional technician to help you install the new car radio. Anyway, first of all, it is essential for you to select an ideal car radio for your beloved car. If you have no ideas, I’d like to share a fabulous 2014 Mazda Atenza car radio from Seicane with you. Here comes the link, please click:

https://www.seicane.com/touch-screen-android-gps-navigation-radio-for-2014-mazda-atenza-with-bluetooth-music-usb-3g-wifi-1080p-video-obd2-mirror-link-rearview-camera-s0481

After you install this 10.1 inch car radio in your beloved car, you will embrace a much smoother and faster operation experience since it is based on the stable Android 6.0 operation system and a high-quality quad-core CPU processor.

The high-end 3D GPS navigation system is specially built in this unit, so you can take full advantage of it to locate where you are and find the right way to reach any locations you would like to go through turn-by-turn directions and voice prompts. Additionally, thanks to this unit’s dual zone function, while navigating, you can freely enjoy music under GPS mode and the music can automatically switch to GPS voice.

Besides, through Bluetooth connection between your Bluetooth-enabled mobile phones and this car radio, Bluetooth hands-free calls and streaming music are both available for you without taking your hands off the steering wheel to gain convenience and enjoyment.

Wish you have an unforgettable driving experience accompanied by this car radio. Good luck to you!

How to Skillfully Install a 2013 2014 Chevrolet Trax Car Radio with Bluetooth GPS Navigation Function

2013 2014 Chevrolet Trax Car Radio after installation

There is no doubt that when you want to make your car more featured, one of the most effective ways is to replace your factory radio with a new aftermarket car radio. And if you are going to remove your factory radio and install the new car radio by yourself, you can find a correct installation guide, and follow it step by step to help with the car radio installation. Today I would like to share a detailed 2013 2014 Chevrolet Trax car radio installation guide from Seicane with you. Wish it can be helpful for you.

2013 2014 Chevrolet Trax Car Radio after installation

2013 2014 Chevrolet Trax Car Radio after installation

Here are some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2013 2014 Chevrolet Trax car radio installation guide

1. Remove two panels on each side. Please use a plastic removal tool.

Remove two panels on each side. Please use a plastic removal tool

Remove two panels on each side. Please use a plastic removal tool

1-1

1-1

2. Open the top part above the air vent and then pry the panel inside.

Open the top part above the air vent and then pry the panel inside

Open the top part above the air vent and then pry the panel inside

3. Remove screw that holding the radio frame.

Remove screw that holding the radio frame

Remove screw that holding the radio frame

3-1

3-1

4. Unscrew screws that fixed the radio and then take out the radio.

Unscrew screws that fixed the radio and then take out the radio

Unscrew screws that fixed the radio and then take out the radio

5. Unplug the connectors and cables at the back of the radio.

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original stereo’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Before installation, please make clear every detailed step. If you have some problems you cannot solve by yourself, you can seek help from your dealer, someone experienced or a professional. If you feel it hard for you to install the new car radio by yourself, you’d better go to a car radio upgrade center to arrange a professional technician to help you install the new car radio. Besides, it is essential for you to pick an ideal car radio for your beloved car. If you have no ideas, you might as check out the following link which is a remarkable 2013 2014 Chevrolet Trax car radio from Seicane.

https://www.seicane.com/2013-2014-chevrolet-trax-android-radio-gps-navigation-system-with-bluetooth-wifi-usb-1080p-video-dvr-mirror-link-steering-wheel-control-s04137

Loaded with the intelligent stable Android 6.0 operation system and a high-quality quad-core CPU processor, this car radio can provide its users with an excellent operation experience thanks to its enhanced capability and improved performance.

Under the guidance of turn-by-turn direction and voice prompts provided by the high-accuracy 3D GPS navigation system, you can easily locate where you are and accurately navigate to any locations you would like to go to. With dual zone function, this unit enables you to freely listen to music while navigating, and the music can automatically switch to GPS voice.

Equipped with a large 9 inch 1024*600 multi-touch screen, this car radio will provide you with the best display effect when you are watching videos, TV programs, movies, etc, besides, it will also enable you to have a good view of the road ahead.

Wish you like this unit and good luck to you!

How to Install a 2010 2011 2012 2013 2014-2015 KIA Sportage Car Radio with Bluetooth GPS Speakers Stereo Sound System

2010 2011 2012 2013 2014-2015 KIA Sportage Car Radio afterinstallation

As you can see, nowadays, a car radio is much more affordable for car owners. However, after you get an ideal car radio, you still need to pay extra money for its installation if you don’t know how to install it. But if you have some related installation experience and a correct installation guide, you can also try to install the new car radio for your beloved car on your own without paying one cent. This article is mainly about a 2010 2011 2012 2013 2014-2015 KIA Sportage car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to it carefully.

2010 2011 2012 2013 2014-2015 KIA Sportage Car Radio afterinstallation

2010 2011 2012 2013 2014-2015 KIA Sportage Car Radio afterinstallation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2010 2011 2012 2013 2014-2015 KIA Sportage car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Uncover the screw covers on each corner and then remove the two screws with a screwdriver.

Uncover the screw covers on each corner and then remove the two screws with a screwdriver

Uncover the screw covers on each corner and then remove the two screws with a screwdriver

2-1

2-1

3. Adjust the steering wheel so as to release the panel on the left side of the radio and then remove it. Don’t forget to disconnect the connectors at the back.

Adjust the steering wheel so as to release the panel on the left side of the radio and then remove it. Don't forget to disconnect the connectors at the back

Adjust the steering wheel so as to release the panel on the left side of the radio and then remove it. Don’t forget to disconnect the connectors at the back

3-1

3-1

3-2

3-2

4. Remove the panel on the right side of the radio with a plastic removal tool.

Remove the panel on the right side of the radio with a plastic removal tool

Remove the panel on the right side of the radio with a plastic removal tool

5. Remove two screws that fixed the radio panel, then remove the panel and unplug the connector at the back.

Remove two screws that fixed the radio panel, then remove the panel and unplug the connector at the back

Remove two screws that fixed the radio panel, then remove the panel and unplug the connector at the back

5-1

5-1

6. Remove four screws that are holding the radio on the dashboard.

Remove four screws that are holding the radio on the dashboard

Remove four screws that are holding the radio on the dashboard

7. Take out the original radio and unplug the connectors at the back of it.

Take out the original radio and unplug the connectors at the back of it

Take out the original radio and unplug the connectors at the back of it

7-1

7-1

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

That’s all about how to replace a 2010 2011 2012 2013 2014-2015 KIA Sportage car radio. Wish you can learn some skills from the above guide. If you still have any doubts, please don’t hesitate to consult your dealer, communicate with someone experienced or a professional. Or you can directly arrange a professional technician to help you install the new car radio. Anyway, it is essential for you to select an ideal car radio for your beloved car, if you don’t have any ideas, I would like to share a marvelous 2010 2011 2012 2013 2014-2015 KIA Sportage car radio from Seicane with you. Here comes the link, please click:

https://www.seicane.com/hd-touchscreen-radio-for-2010-2015-kia-spotage-android-with-gps-navigation-audio-system-bluetooth-music-usb-aux-wifi-1080p-tv-mirror-link-dvr-s0495

Based on the stable Android 6.0 operation system and loaded with a high-quality quad-core CPU processor, this car radio can provide its users with better performance to be a great replacement for your factory radio.

Even if you are driving around a totally unfamiliar place, you can easily locate where you are and accurately navigate to your next destinations through turn-by-turn direction and voice prompts. And with dual zone function, this unit allows you to listen to music which can be played behind the scene under GPS mode while navigating.

This car radio is equipped with a large 9 inch 1024*600 multi-touch screen, so you can enjoy the best display effect when you watch videos, TV programs, movies, etc and have a good view of the road ahead.

What are you waiting for? If you like this car radio, just add it to your shopping cart. Good luck!

The Full Tutorial on a 2016 Peugeot 308 Car Radio Replacement for Beginners

2016 Peugeot 308 Car Radio after installation

Compared with your factory radio, a new aftermarket car radio should be equipped with higher configurations, performance and more advanced features. Therefore, if you find your factory radio is too outdated to support some modern features, you can just remove it and install a new multifunctional car radio in your car. Today I would like to introduce a 2016 Peugeot 308 car radio installation instruction from Seicane to you. Wish it is helpful for you.

2016 Peugeot 308 Car Radio after installation

2016 Peugeot 308 Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2016 Peugeot 308 car radio installation instruction

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Wish you can get some inspiration from the above installation instruction. To overcome the difficulties you meet during the installation, please feel free to contact your dealer or seek help from a professional. Or you can directly go to a car radio upgrade center and ask a technician to help you install the new car radio.

Anyway, before installation, please check the compatibility between your new car radio and your car. If the new car radio is not compatible enough, you’d better quit it and pick a suitable one again. Here I would like to share an excellent 2016 Peugeot 308 car radio from Seicane with you. Here comes the link, please click:

https://www.seicane.com/2016-peugeot-308-android-radio-gps-navigation-system-support-canbus-bluetooth-music-usb-1080p-video-3g-wifi-obd2-mirror-link-rearview-s0417

This car radio runs on the stable Android 6.0 operation system and a powerful quad-core CPU processor to enhance its capability and performance. With it installed in your car, you are able to embrace a wonderful driving experience.

With the assistance of the worldwide real-time GPS navigation system, you will have no trouble in knowing your current locations and finding the right way to reach your desired destinations through turn-by-turn directions and voice prompt. Besides, with dual zone function, you can freely listen to music from radio/AV/DVD/TV etc while navigating.

Besides, through the wireless Bluetooth connection between your mobile phone and this car radio, you can make, receive, reject and mute Bluetooth hands-free calls as well as enjoy streaming music from your phone playlists.

Wish you enjoy your relaxing trip accompanied by this car radio. Good luck to you!

Tips for Removing and Installing a 2016 Honda accord 9 (2.0L) Car Radio with Bluetooth GPS Function

2016 Honda accord 9 (2.0L) Car Radio after installation

What’s in your mind when referring to the installation of a car radio? Perhaps you think it hard and can only be finished by a professional with much expertise and experience. However, as I as I am concerned, it is not difficult for you to finish the car radio installation if you have some related experience and a correct installation guide. Here I would like to share a 2016 Honda accord 9 (2.0L) car radio installation guide from Seicane to you. If you have the same or similar dashboard, you can refer to it carefully.

2016 Honda accord 9 (2.0L) Car Radio after installation

2016 Honda accord 9 (2.0L) Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2016 Honda accord 9 (2.0L) car radio installation guide

1. Use a plastic removal tool to remove the side panels.

Use a plastic removal tool to remove the side panels

Use a plastic removal tool to remove the side panels

2. Remove two screws that fix the pocket.

Remove two screws that fix the pocket

Remove two screws that fix the pocket

3. Remove the pocket.

Remove the pocket

Remove the pocket

4. Use a plastic removal tool to release the panel to the left of the radio.

Use a plastic removal tool to release the panel to the left of the radio

Use a plastic removal tool to release the panel to the left of the radio

5. Use the plastic removal tool to pry the top tray and remove it.

Use the plastic removal tool to pry the top tray and remove it

Use the plastic removal tool to pry the top tray and remove it

6. There are two top screws and two bottom screws that are holding the radio, remove them with a screwdriver.

There are two top screws and two bottom screws that are holding the radio, remove them with a screwdriver

There are two top screws and two bottom screws that are holding the radio, remove them with a screwdriver

6-1

6-1

7. Pull out the original radio and disconnect connectors at the back of it.

Pull out the original radio and disconnect connectors at the back of it

Pull out the original radio and disconnect connectors at the back of it

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

Wish you can get some help from the above installation guide. If you have any doubts, please feel free to consult your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to finish the whole removal and installation by yourself, you can straightly arrange a professional technician to help you install the new car radio directly. Besides, if you haven’t got an ideal car radio yet, I’d like to share a 2016 Honda accord 9 (2.0L) car radio from Seicane with you, which can be taken as your reference.

https://www.seicane.com/hd-touch-screen-android-car-stereo-for-2016-honda-accord-9-2-0l-gps-navigation-with-radio-bluetooth-music-usb-dvr-3g-wifi-mirror-link-steering-wheel-control-1080p-video-canbus-s0403

Upgraded to the most stable Android 6.0 operation system and loaded with a powerful CPU processor, this car radio can be regarded as one of your best choices to replace your factory radio in 2016 Honda accord 9 (2.0L).

The worldwide real-time GPS navigation system is especially built-in for you to locate where you are and find the right way to reach any locations you would like to go to at anytime and anywhere. Besides, thanks to this unit’s dual zone function, you are able to listen to your favorite music while navigating.

Besides, this car radio is equipped with a large HD 10.1 inch multi-touch screen with 1024 *600 pixels. So when you watch videos TV program or movies, you can enjoy the best display effect and have a good view of the road ahead.

Wish you enjoy your in-car life accompanied by this all-in-one car radio. Good luck!

How to Upgrade a 2001 2002 2003 2004 2005-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 GPS Bluetooth DVD Car Radio

2001 2002 2003 2004 2005-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 GPS Bluetooth DVD Car Radio after installation

Do you wonder how to make your car more featured so as to upgrade your in-car life? As for as I am concerned, it is necessary for you to remove your factory radio and install a new car radio if you think your factory radio is not up-to-date enough for you to get access to a wide range of comprehensive features. This article is mainly about the removal and installation of a 2001 2002 2003 2004 2005-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 car radio. If you own the same or similar dashboard, you may refer to this article carefully.

2001 2002 2003 2004 2005-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 GPS Bluetooth DVD Car Radio after installation

2001 2002 2003 2004 2005-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 GPS Bluetooth DVD Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. Please prepare a lever and a screwdriver before the removal and the installation.

5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2001 2002 2003 2004 2005-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Turn on key, DO NOT turn on engine, move shifter lever so you can move trim, make sure car is not moving.

Turn on key, DO NOT turn on engine, move shifter lever so you can move trim, make sure car is not moving

Turn on key, DO NOT turn on engine, move shifter lever so you can move trim, make sure car is not moving

3. Push and remove the extra assembly.

Push and remove the extra assembly

Push and remove the extra assembly

3-1

3-1

4. Carefully lift front of shifter trim, pull forward, then lift back of trim.

Carefully lift front of shifter trim, pull forward, then lift back of trim

Carefully lift front of shifter trim, pull forward, then lift back of trim

5. Remove two screws holding the panel.

Remove two screws holding the panel

Remove two screws holding the panel

5-1

5-1

6. Remove the panel.

Remove the panel

Remove the panel

7. Remove two screws that fixed the original radio on the dashboard.

Remove two screws that fixed the original radio on the dashboard

Remove two screws that fixed the original radio on the dashboard

7-1

7-1

8. Pull out the original car radio gently, and then unplug the connectors at the back of the car radio.

Pull out the original car radio gently, and then unplug the connectors at the back of the car radio

Pull out the original car radio gently, and then unplug the connectors at the back of the car radio

9. Check all the accessories for the new Seicane car radio.

10. Connect the harnesses to the back of the new Seicane car radio.

11. Connect the Seicane car radio to your original radio’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

 

Before the installation, please confirm that you are clear about every detailed step. Don’t worry if you cannot fully understand all the above installation guide. In that case, you can consult your dealer, communicate with someone experienced or turn to a professional for help. However, if you haven’t got an ideal car radio for your beloved car, you can refer to a remarkable 2001 2002 2003 2004 2005-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 car radio from Seicane. Here comes the link, you may check it for more details.

https://www.seicane.com/2001-2008-mercedes-benz-g-class-w463-g550-g500-g400-g320-android-hd-touchscreen-dvd-player-car-radio-with-gps-navi-bluetooth-wifi-usb-mirror-link-steering-wheel-control-1080p-video-s6905

This remarkable car radio is based on the advanced Android 7.1 operation system and a powerful   CPU processor, which can provide you with a smoother and faster operation experience.

Even though you don’t have a good sense of directions, you can utilize this unit’s built-in 3D GPS navigation system to find your way. With the help of the worldwide real-time GPS navigation, you can easily locate where you are and navigate to your desired destinations thanks to these features, which include current location, speed, mileage, landmark building display, 3D street view, destination search and turn-by-turn voice directions.

Besides, under the wireless Bluetooth technology, both Bluetooth hands-free calls and streaming music are available for you by pairing your Bluetooth-enabled mobile phone with this remarkable car radio, which can bring your convenience, driving safety and enjoyment.

Wish you like this unit and good luck to you!