How to install a 2004 2005 2006 2007 2008-2009 Mazda 3 Car Stereo with Bluetooth GPS Navigation System

2004 2005 2006 2007 2008-2009 Mazda 3 Car Stereo after installation

Do you want to create a more convenient and comfortable environment as well as embrace a wonderful driving experience? If your answer is “yes”, then it is absolutely necessary for you to replace your factory radio with a brand new multifunctional car stereo. This article aims to introduce a 2004 2005 2006 2007 2008-2009 Mazda 3 car stereo installation guide. If you have the same or similar dashboard, you can carefully read this article and follow the guide to deal with your installation.

2004 2005 2006 2007 2008-2009 Mazda 3 Car Stereo after installation

2004 2005 2006 2007 2008-2009 Mazda 3 Car Stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004 2005 2006 2007 2008-2009 Mazda 3 car stereo installation guide

1. Remove the trim panel with a plastic removal tool.

Remove the trim panel with a plastic removal tool

Remove the trim panel with a plastic removal tool

1-1

1-1

2. Remove two screws that fixed the car radio on the dashboard.

Remove two screws that fixed the car radio on the dashboard

Remove two screws that fixed the car radio on the dashboard

3. Take out the original car radio.

Take out the original car radio

Take out the original car radio

4. Unplug connectors at the back of the original car radio.

Unplug connectors at the back of the original car radio

Unplug connectors at the back of the original car radio

4-1

4-1

5. Check all the accessories for the new Seicane car stereo.

6. Connect the harnesses to the back of the new Seicane car stereo.

7. Connect the Seicane car stereo to your original radio’s plugs.

8. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car stereo into the dash.

10. Put everything into their original place. All the installation is done.

 

Don’t worry if you come across any problems before or during the installation process. To solve these problems, you can consult your dealer, communicate with someone experienced or turn to a professional for help. Anyway, before installation, please check if your new car stereo can fit your beloved car. If not, you’d better quit it and select another suitable one. Here I would like to recommend a remarkable 2004 2005 2006 2007 2008-2009 Mazda 3 car stereo from Seicane to you. You might as well check out the following link for more information.

https://www.seicane.com/oem-2004-2009-mazda-3-android-hd-touchscreen-touchscreen-dvd-gps-radio-bluetooth-obd2-dvr-rearview-camera-1080p-steering-wheel-control-wifi-s32791

This car stereo is running on the stable Android6.0 operation system and a strong 8 – Core 1.5 GHz Coretex-A53 processor to facilitate the operation and enhance performance for you to enjoy your driving experience.

With this powerful car stereo installed in your car, you can get access to a lot of comprehensive features, mainly including 3D GPS navigation, FM/AM radio tuner, DVD player, Bluetooth hands-free calls, Bluetooth streaming music, USB/ SD card connection, AUX, steering wheel, etc.

By taking full advantage of the high-end 3D GPS navigation function, you can know your current locations quickly and find the shortcut or right way to reach your desired destinations through turn-by-turn directions and voice prompts. What’s more, you won’t feel bored while driving because this unit’s dual zone function allows you to play music while navigating.

What are you waiting for? Just keep this great car stereo along with you. Good luck!

Essential Tutorial on a 2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holden GPS Bluetooth DVD Car Radio Installation

2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holden GPS Bluetooth DVD Car Radio after installation

If you are car driver, you must know how import part a car radio plays in your car. If your car radio is integrated with a lot of practical and entertainment features, then almost your different needs in car can be met. However, if your factory radio is not up-to-date enough or your factory radio has only single functions, please don’t hesitate to replace it with a new aftermarket car radio. The following is a 2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holdencar radio installation instruction from Seicane. If you own the same vehicle type, you can take this instruction as a reference.

2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holden GPS Bluetooth DVD Car Radio after installation

2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holden GPS Bluetooth DVD Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holden car radio installation instruction

1. The original car radio.

The original car radio

The original car radio

2. Using a panel removal tool, gently pry the upper trim/vent housing panel from the dash.

Using a panel removal tool, gently pry the upper trim/vent housing panel from the dash

Using a panel removal tool, gently pry the upper trim/vent housing panel from the dash

3. Pry the shifter surround panel. On manual transmission vehicles, unclip and reposition the shifter. Then remove the panel.

Pry the shifter surround panel. On manual transmission vehicles, unclip and reposition the shifter. Then remove the panel

Pry the shifter surround panel. On manual transmission vehicles, unclip and reposition the shifter. Then remove the panel

3-1

3-1

4. Remove two screws from the storage pocket. Then remove the storage.

Remove two screws from the storage pocket. Then remove the storage

Remove two screws from the storage pocket. Then remove the storage

4-1

4-1

4-2

4-2

5. Remove four screws from the accessory control panel.

Remove four screws from the accessory control panel

Remove four screws from the accessory control panel

5-1

5-1

5-2

5-2

5-3

5-3

6. Pull out the panel. This panel is very tough to remove, please be patient and the clips will release, then let the panel hang to side.

Pull out the panel. This panel is very tough to remove, please be patient and the clips will release, then let the panel hang to side

Pull out the panel. This panel is very tough to remove, please be patient and the clips will release, then let the panel hang to side

7. Unscrew two screws from the radio control panel. Then remove the radio control panel.

Unscrew two screws from the radio control panel. Then remove the radio control panel

Unscrew two screws from the radio control panel. Then remove the radio control panel

7-1

7-1

7-2

7-2

8. Remove the blue clip before removing the real connector.

Remove the blue clip before removing the real connector

Remove the blue clip before removing the real connector

9. Unscrew two screws from the radio chassis, and two screws near the top of the radio to release the screen.

Unscrew two screws from the radio chassis, and two screws near the top of the radio to release the screen

Unscrew two screws from the radio chassis, and two screws near the top of the radio to release the screen

9-1

9-1

9-2

9-2

10. Disconnect the connector at the back of the screen.

Disconnect the connector at the back of the screen

Disconnect the connector at the back of the screen

11. Unscrew two more screws in the original radio.

Unscrew two more screws in the original radio

Unscrew two more screws in the original radio

11-1

11-1

12. Remove the original radio.

Remove the original radio

Remove the original radio

13. Disconnect all connectors at the back of the original car radio.

14. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

15. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

16. Connect the Seicane car radio to your original car radio’s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. Put the new Seicane radio into the dash.

19. Put everything into their original place.

 

Wish you can learn something useful from the above installation steps. If you have any questions, you may browse some professional websites, consult your dealer or turn to a professional for help. If you are afraid of making damage to either your car or your car radio, you can also directly arrange a technician to install it.

If you wonder what kind of car radio can work well with your car, I’d like to share a powerful 2008 2009 2010 2011 2012 Chevrolet Chevy Cruze Holden car radio from Seicane to you. For more details, please click:

https://www.seicane.com/android-gps-radio-for-2008-2012-chevrolet-chevy-cruze-holden-with-hd-touchscreen-dvd-bluetooth-rearview-camera-1080p-steering-wheel-control-3g-wifi-s32751

With this all-in-one car radio installed in your beloved car, you will embrace an excellent driving experience.

Based on the stable Android 6.0 operation system and a high-quality 8 -Core 1.5 GHz Coretex-A53 processor, this car radio owns better capacity and performance to provide you with better service.

Although you don’t have a good sense of directions, with the help of the high-end 3D GPS navigation system, you can easily know your current locations and accurately navigate to your ideal destinations through turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Besides, as for the entertainment options, you can turn on the DVD player function to play videos, TV programs, movies, etc to relax both yourself and your passengers.

What are you waiting for? If you like this car radio, just add it to your shopping cart. Good luck!

How to Upgrade a 2010 Kia Ceed GPS Bluetooth Car Radio with Audio System Properly

2010 Kia Ceed GPS Bluetooth Car Radio after installation

Nowadays, it won’t cost a car owner too much money to replace their factory radio with a new aftermarket car radio for getting access to better performance and upgraded or new features as well. Thus, more and more car owners would carefully select an ideal car radio among many products to replace their mono-functional factory radio. The following is a detailed installation guide on a 2010 Kia Ceed car radio. If you have the same or similar dashboard, please refer to this guide carefully.

2010 Kia Ceed GPS Bluetooth Car Radio after installation

2010 Kia Ceed GPS Bluetooth Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2010 Kia Ceed car radio installation guide

1. Pry around the edges of the trim panel with a lever.

Pry around the edges of the trim panel with a lever

Pry around the edges of the trim panel with a lever

2. Remove the trim panel.

Remove the trim panel

Remove the trim panel

3. Disconnect all the connectors of the trim panel.

Disconnect all the connectors of the trim panel

Disconnect all the connectors of the trim panel

4. Unscrew all the screws holding the original car radio in place with a screwdriver.

Unscrew all the screws holding the original car radio in place with a screwdriver

Unscrew all the screws holding the original car radio in place with a screwdriver

5. Gently take the original car radio out of the dashboard.

Gently take the original car radio out of the dashboard

Gently take the original car radio out of the dashboard

6. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio

Disconnect all connectors at the back of the original car radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

That’s all about how to remove and install a 2010 Kia Ceed car radio. If you cannot fully understand all the steps, it is highly suggested that you should contact your dealer, communicate with someone experienced or turn to a professional for help. But if you are still looking for an ideal car radio but don’t know what kind of car radio can fit your car well, I’d like to recommend an amazing 2010 Kia Ceed car radio from Seicane to you. Here comes the link, please click:

https://www.seicane.com/2010-kia-ceed-android-radio-gps-navigation-with-bluetooth-hd-touchscreen-mirror-link-rearview-camera-1080p-steering-wheel-control-3g-wifi-obd2-s32744

This car radio is equipped with the advanced Android 6.0 operation system and a high-quality 8 – Core 1.5 GHz Coretex-A53 processor.

With this all-in-one car radio installed in your car, you can get access to the high-end 3D GPS navigation function. Under the guidance of turn-by-turn directions and voice prompts provided by the worldwide real-time GPS navigation system, you will be accurately guided to any locations you like even though you have no good sense of directions.

Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this car radio. Therefore, you can make, receive, reject and mute hands-free calls as well as listen to streaming music from your phone music playlists with keeping your hands on the steering wheel and your eyes on the road ahead.

If you like this all-in-one car radio, just but it and install it in your car. Wish you have a wonderful driving accompanied by it. Good luck!

Easy-to-understand Installation Steps for a 2014 Hyundai Elantra GPS Bluetooth DVD Car Radio

2014 Hyundai Elantra GPS Bluetooth DVD Car Radio after installation

To install a new car radio for your beloved car, you can go to a car radio upgrade center to have it installed by a professional technician or ask a professional for help. But if you have some related installation experience, you can also try to remove the factory radio and install the new car radio by yourself. No matter which way you choose, a detailed guide will be helpful for you. Now I’d like to share a detailed 2014 Hyundai Elantra car radio installation guide from Seicane with you.

2014 Hyundai Elantra GPS Bluetooth DVD Car Radio after installation

2014 Hyundai Elantra GPS Bluetooth DVD Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2014 Hyundai Elantra car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

That’s the whole removal and installation process for a 2014 Hyundai Elantra car radio. If you cannot fully understand these steps, you can seek help from your dealer, someone experienced or a professional. Anyway, first of all, you have to carefully select an ideal car radio. If you don’t know which kind of car radios can fit your car very well, I’d like to recommend a 2014 Hyundai Elantra car radio from Seicane to you. Here comes the link, please click:

https://www.seicane.com/android-car-stereo-gps-for-2014-hyundai-elantra-with-dvd-radio-wifi-tv-bluetooth-touch-screen-dvr-obd-mirror-link-rearview-camera-video-s32783

If you are driving around an unfamiliar city, you can turn on the high-precision 3D GPS navigation system. Through turn-by-turn directions and voice prompts, you can easily know your current locations and get the best route option to reach your desired destinations without getting lost even you don’t have a good sense of directions. Additionally, thanks to dual zone function, you can freely listen to your favorite music which can be played behind the scene under GPS mode, and the music can automatically switch to GPS voice.

What’s more, the built-in Bluetooth module makes it possible for you to dial, answer, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your mobile phone with keeping your hands on the steering wheel and your eyes on the eyes on the road ahead.

Apart from these practical features, there are also some entertainment features you can take advantage of to get a lot of convenience and enjoyment.

Wish you like this unit and good luck to you!

The Effective Method to Remove and Install a 2006 2007 2008 2009 2010-2011 OPEL Antara Car Radio

2006 2007 2008 2009 2010-2011 OPEL Antara Car Radio after installation

If you know your car model and its manufactured year, it is very easy for you to choose an ideal car radio among a lot of car radios. And someone of you may worry about the installation. As a matter of fact, the installation is quite easy. If you have someone related experience and a correct installation guide, you can also try to finish the car radio installation. Or you can also have it installed by a professional. This article is a step-by-step 2006 2007 2008 2009 2010-2011 OPEL Antaracar radio installation guide from Seicane. You may take it as a reference if you have the same or similar dashboard.

2006 2007 2008 2009 2010-2011 OPEL Antara Car Radio after installation

2006 2007 2008 2009 2010-2011 OPEL Antara Car Radio after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006 2007 2008 2009 2010-2011 OPEL Antara car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Put four removal sticks into four holes of the original car radio.

Put four removal sticks into four holes of the original car radio

Put four removal sticks into four holes of the original car radio

3. Take the original car radio out of the dashboard by pulling the removal sticks.

Take the original car radio out of the dashboard by pulling the removal sticks

Take the original car radio out of the dashboard by pulling the removal sticks

4. Disconnect the connectors at the back of the original radio.

5. Check all the accessories for the new Seicane car stereo.

6. Connect the harnesses to the back of the new Seicane car stereo.

7. Connect the Seicane car stereo to your original car radio’s plugs.

8. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane stereo into the dash.

10. Put everything into their original place.

 

Wish the above installation guide is helpful for you. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think the installation process is too complicated, you can directly arrange a professional technician to help you install the new car radio. If you want to select an ideal car radio but don’t know which kind of car radios can fit your car well, I’d like to recommend a remarkable 2006 2007 2008 2009 2010-2011 OPEL Antara car radio from Seicane to you.

https://www.seicane.com/android-hd-touch-screen-radio-for-2006-2011-opel-antara-with-gps-navigation-system-bluetooth-wifi-usb-audio-mirror-link-steering-wheel-control-s127686e

The worldwide real-time 3D GPS navigation system is especially built in this car radio, so you are able to make full use of it to locate where you are and find the most suitable way to reach your desired destinations according to turn-by-turn directions and voice prompts. Besides, this car radio’s dual zone function enables you to freely enjoy your favorite music while navigating.

Thanks to the advanced wireless Bluetooth module of this car radio, Bluetooth hands-free calls and Bluetooth streaming music are both available for you. As long as you connect your Bluetooth-enabled mobile phone to this unit, without taking your hands off the steering wheel, you can make, receive, reject and mute hands-free calls as well as freely listen to your favorite music streaming from your phone music playlists. Therefore, you can have a safe, convenient and relaxing journey.

Wish you like this unit and good luck to you!

How to Remove the Factory Radio and Install a Brand New Car Radio in a 2012 2013 Skoda Rapid

2012 2013 Skoda Rapid car radio after installation

Are you longing for a brand new driving experience full of convenience and entertainment? If your answer is “yes”, it is a wise choice for you to replace your factory radio with a new aftermarket car radio which is compatible with a wide range of comprehensive features to offer convenience and enjoyment. To successfully install the new car radio, you can find a related installation guide to help you. Here I would like to share a detailed 2012 2013 Skoda Rapid car radio installation guide from Seicane with you. If you have the same or similar dashboard, you can take it as a reference.

2012 2013 Skoda Rapid car radio after installation

2012 2013 Skoda Rapid car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2012 2013 Skoda Rapid car radio installation guide

1. Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane car radio.

13. Connect the harnesses to the back of the new Seicane car radio.

14. Connect the Seicane car radio to your original car radio’s plugs.

15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car radio into the dash.

17. Put everything into their original place.

 

How much have you learnt from the above installation steps? If you still have some problems you cannot deal with, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. If you think the installation process is fairly complicated for you, you’d better go to a car radio upgrade center to have the new car radio installed by a professional technician.

To help you select an ideal car radio, I’d like to recommend a remarkable 2012 2013 Skoda Rapid car radio from Seicane to you. For more information, please click:

https://www.seicane.com/oem-android-gps-radio-audio-system-for-2012-2013-skoda-rapid-support-dvd-player-3g-wifi-mirror-link-obd2-dvr-bluetooth-rearview-camera-touch-screen-s129698e

With this car radio installed in your car, you can absolutely gain an ideal in-car life.

This car radio is loaded with the advanced Android 6.0 operation system, a powerful 8-core   CPU processor and 32GB INand flash as well as 2GB RAM. So it will provide you with the best services thanks to its higher and better configuration and performance.

Featured with the high-precision GPS navigation system, this car radio enables you to locate where you are and find the right way to reach your ideal destinations without any mistakes through turn-by-turn directions and voice prompts. Additionally, this car radio’s dual zone function allows you to listen to your favorite music from radio/ AV/ DVD/ TV etc while you are navigating.

While for entertainment option, you can make use of this unit’s function as a DVD player to play videos, TV programs, movies, etc to relax yourself and your passengers for getting a lot of fun.

Wish you like this unit and good luck to you!