With the improvement of people’s economic condition, cars become available for more and more car owners. If you also own a beloved car, you must want to upgrade your car’s capacities. If you want to have a brand new driving experience, then you can consider replacing your factory radio with a new multifunctional car radio. To install a new car radio, you can refer to a detailed car radio installation guide. Here I’d like to share a professional 2011 Ford C Max car radio installation guide with your for your reference.
2011 Ford C Max Car Radio after installation
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2011 Ford C Max car radio installation guide
1. The original car radio.
The original car radio
2. Remove the screws under the front panel.
Remove the screws under the front panel
3. Use a lever to pry along the edges of the front panel and loosen it with your hands.
Use a lever to pry along the edges of the front panel and loosen it with your hands
4. Take the front panel out of the dash.
Take the front panel out of the dash
5. Disconnect the connector at the back of the front panel. Then put front panel aside.
Disconnect the connector at the back of the front panel. Then put front panel aside
6. Unscrew two screws holding the factory radio into the dash with a screwdriver.
Unscrew two screws holding the factory radio into the dash with a screwdriver
7. Gently take the factory radio out of the dash.
Gently take the factory radio out of the dash
8. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
9. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
10. Connect the Seicane car radio to your original car radio’s plugs, and put the new Seicane car radio into the dash.
11. Turn on the new Seicane car radio and check whether the radio is working properly.
12. Install all screws and the front panel into their original place.
Perhaps now you have a general understanding of the installation process about a 2011 Ford C Max car radio. Don’t worry if you have any doubts about your car radio or the installation. To succeed in the whole installation process, you can consult your dealer, communicate with someone experienced or seek help from a professional. Or you can directly go to a car radio and get your new car radio installed by a technician.
While for selecting an ideal car radio, if you have no ideas, you can refer to the link below which is a marvelous 2011 Ford C Max car radio from Seicane.
Equipped with the worldwide real-time GPS navigation system of high accuracy, this car radio enables you to know your current location and find the right way to reach your desired destinations accurately even you have no good sense of directions. And while navigating, you can listen to your favorite music under GPS mode because of this unit’s dual zone function.
With the help of the built-in Bluetooth module, you can connect your Bluetooth-enabled mobile phone with this unit for Bluetooth hands-free calls and Bluetooth streaming music, which can promise you a safe and cheerful driving.
Additionally, you can add a backup camera to this unit for automatically switching to the parking image while reversing, which is beneficial to your safe driving.
Wish you like it and good luck to you!
