When you get your beloved car, it is necessary for you to pay attention to the new arrival car radios in the market. With a more advanced car radio installed in your car, your in-car experience will be improved greatly. So if you think your original car radio is out of date, you need to replace it with a new one. The following is a universal double din car radio installation guide; you can take it as a reference.

Universal Double Din car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

Universal double din car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

That’s all about the removal and installation for a universal car radio. If you have any questions, you’d better ask your dealer or a professional for help. To help you better select a suitable car radio for your car, I’d like to recommend a remarkable universal double din car radio from Seicane to you.

http://www.seicane.com/android-radio-gps-navigation-system-for-universal-double-din-with-capacitive-touch-screen-tpms-dvr-obd-ii-headrest-monitor-control-usb-sd-bluetooth-3g-wifi-video-aux-rear-camera-s088688

This powerful universal double din car radio can be one of your best choices for you to replace your factory radio. To make full use of the Bluetooth module, you are able to sync with your Bluetooth-enabled mobile phone for hands-free calls and streaming music which provide you with driving safety, convenience and enjoyment. Besides, no matter where you are, you can accurately locate and navigate to places where you would like to go with the help of the 3D GPS navigation system in high precision. Wish you like this universal car radio and good luck to you!

When you get a car radio for your beloved car, you may worry bout the so-called complicated installation process. Actually, the car radio installation is not very difficult. You can also achieve the whole installation process like a “professional” if you have some related installation experience and a correct installation guide to follow. The following detailed 1998-2006 BMW 3 Series E46 316i 318i 320i 323i 325i car radio installation guide can be taken as a reference if you own such a vehicle type.

1998-2006 BMW 3 Series E46 Stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

1998-2006 BMW 3 Series E46 316i 318i 320i 323i 325i car radio installation guide

1. The original car radio.

The original car radio

2. Use a plastic removal tool to remove the panel on the left side of the radio.

Use a plastic removal tool to remove the panel on the left side of the radio

2-1

3. Release the radio trim panel to get access the screws that fixed the radio.

Release the radio trim panel to get access the screws that fixed the radio

4. Remove screws that are holding the radio.

Remove screws that are holding the radio

4-1

5. Gently pull out the original car radio.

Gently pull out the original car radio

6. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original stereo’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

Don’t be over worried if you have any questions after reading the above installation guide. In that case, you can seek help from your dealer, someone experienced or a professional. But if you still think it impossible to install the new car stereo on your own, you’d better go to a car stereo upgrade center to install your new car stereo. What’s more, if you are still searching online for an ideal stereo, you might as well check out the link below which is about an amazing 1998-2006 BMW 3 Series E46 316i 318i 320i 323i 325i car stereo from Seicane. Please click:

http://www.seicane.com/android-9-inch-hd-1024-600-touch-screen-for-1998-2006-bmw-3-series-e46-316i-318i-320i-323i-325i-gps-navigation-bluetooth-radio-rds-mirror-link-wifi-s301182

This intelligent car radio not only comes with upgraded practical functions but also entertainment features, which can help you gain great convenience in car and largely improves your driving experience. When you take advantage of multi functions of this unit, you can easily navigate to your destinations, get access to hands-free calls, and enjoy Bluetooth music, DVD, radio, video, etc. Because of these features in diversity, you won’t easily feel tired and bored for the long time in a car. Wish you like it and good luck to you!