Both a comfortable in-car life and a relaxing driving experience are available for you if you replace your factory radio with an intelligent car stereo which can support a lot of features. To be honest, the installation of a new car stereo is not difficult, so you can also finish the installation process under the guidance of a correct installation instruction. This passage is mainly about the removal and installation of a 2016 Skoda Yeti car stereo. If you have the same dashboard, you can carefully read it to help with your installation in the future.
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2016 Skoda Yeti car stereo installation instruction
1. Pry the radio frame with a plastic removal tool.
2. Remove the radio frames.
3. Remove four screws that are holding the radio on the dashboard.
4. Release the radio and take it out.
5. Disconnect the connectors and cables at the back of the radio.
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original stereo’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
Wish the above installation instruction can be helpful for you. If you find the instruction is too hard for you to understand, you’d better ask a professional for help or go to a car stereo upgrade center to install your new car stereo. To help you better select a suitable car stereo, I’d like to recommend an excellent 2016 Skoda Yeti gps bluetooth car stereo from Seicane to you, please click:
Featured with exquisite interface as well as higher performance, this car stereo can become one of the best choices for you to upgrade your factory radio. As it is armed with a large 9 inch multi-touch screen with 1024*600 resolution, it is possible for users to operate more easily and enjoy better display effect more clearly. The high-end 3D GPS navigation system of high accuracy enables you to easily and quickly find the best way to get to your destinations via the text-to-speech guidance. Therefore, you don’t have to worry about getting lost any more even in a totally unfamiliar place. Don’t hesitate to install this amazing 2016 Skoda Yeti car stereo in your car and start to enjoy a brand new driving experience in the future!