Monthly Archives: October 2016

How to install a 2014 2015 Ssangyong RODIUS dvd gps audio system with rearview camera OBD2

Posted on by
2014 2015 Ssangyong RODIUS dvd gps audio system after installation

As a matter of fact, to install a new head unit for your beloved car, you don’t have to be professionals. With a detailed installation guide and some related experience, you can also easily install a new head unit successfully. This article is mainly about the installation guide for a 2014 2015 Ssangyong RODIUS head unit. Look at the picture below, it is an amazing Seicane Ssangyong RODIUS head unit after installation. If you have the same dashboard, then this article is worth you reading.

2014 2015 Ssangyong RODIUS dvd gps audio system after installation

2014 2015 Ssangyong RODIUS dvd gps audio system after installation

Here are some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2014 2015 Ssangyong RODIUS head unit installation steps

1.The original car radio.

The original car radio

The original car radio

2.Remove screws holding the bottoming panel with a screwdriver. And then pull it out and unplug the connectors at the back as well as take out the base.

Remove screws holding the bottoming panel with a screwdriver. And then pull it out and unplug the connectors at the back as well as take out the base

Remove screws holding the bottoming panel with a screwdriver. And then pull it out and unplug the connectors at the back as well as take out the base

2-1

2-1

2-2

2-2

3. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

4.Remove the top panel with a plastic knife and then remove the rest hidden screws.

Remove the top panel with a plastic knife and then remove the rest hidden screws

Remove the top panel with a plastic knife and then remove the rest hidden screws

4-1

4-1

5.Pull out the original car radio.

Pull out the original car radio

Pull out the original car radio

6.Unplug the connectors at the back of the factory radio.

7. Check all the accessories for the new Seicane head unit.

8. Connect the harnesses to the back of the new Seicane head unit.

9. Connect the Seicane head unit to your original head unit ‘s plugs.

10. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane head unit into the dash.

12. Put everything into their original place. All the installation is done.

 

After reading the detailed installation guide for a 2014 2015 Ssangyong RODIUS head unit, perhaps you have a general idea about how to remove and install a head unit. If there is any question, you are welcome to consult your dealer or seek help from a professional. If you want to realize the compatibility between your new head unit and your car, you can refer to this 2014 2015 Ssangyong RODIUS head unit which comes with both high performance and an attractive appearance, please click:

http://www.seicane.com/2014-2015-ssangyong-rodius-android-radio-dvd-player-gps-navigation-system-with-hd-1024-600-touch-screen-obd2-dvr-mirror-link-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-bluetooth-usb-sd-ipod-s1677070

This intelligent 2014 2015 Ssangyong RODIUS head unit comes with a HD 1024*600 multi-touch screen for you to replace your factory radio. Comprehensive features can satisfy all your needs in the car, such as 3D GPS navigation system, Bluetooth hands-free calls, Bluetooth music, DVD player and FM/AM radio. Besides, by simply connect a backup camera with this unit, you are able to get a reversing image for help so as to make your parking safer and easier. Just enjoy your driving time with this wonderful 2014 2015 Ssangyong RODIUS head unit in your car. Good luck to you!

Easy-to-understand Installation Steps for a 2001-2010 Hyundai Elantra Lavita GPS Bluetooth Sat Navi with Touch Screen Android5.1.1

Posted on by
Seicane 2001-2010 Hyundai Elantra Lavita GPS Bluetooth Sat Navi after installation

Have a look at the picture below, it looks very awesome, doesn’t it? It is 2001-2010 Hyundai Elantra Lavita car radio after installation. If you are looking forward to enjoying a more comfortable car interior environment and a more exciting driving experience, then you can think about replacing your factory radio with a new car radio which can support a wide range of features to meet your different needs. The following is a detailed 2001-2010 Hyundai Elantra Lavita car radio installation guide from Seicane, which may help you to some extent.

Seicane 2001-2010 Hyundai Elantra Lavita GPS Bluetooth Sat Navi after installation

Seicane 2001-2010 Hyundai Elantra Lavita GPS Bluetooth Sat Navi after installation

 

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2001-2010 Hyundai Elantra Lavitacar radio installation guide

1.Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2.Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3.Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4.Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6.Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7.If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8.Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

 

That’s all about the detailed installation steps to install a new car radio for your 2001-2010 Hyundai Elantra Lavita. Wish you can learn some skills from it. If you have any questions, you’d better turn to your dealer for help or arrange a technician to help you install the car radio. To make sure a successful car radio installation process, you have to confirm that your new car radio fits very well with your car or not. If not, I’d like to share an intelligent Hyundai Elantra Lavita car radio from Seicane with you. Please click the link below for more details.

http://www.seicane.com/oem-android-radio-dvd-player-gps-navigation-system-for-2001-2010-hyundai-elantra-lavita-with-bluetooth-touch-screen-obd2-dvr-rearview-camera-tv-1080p-video-3g-mirror-link-wifi-steering-wheel-control-usb-sd-quad-core-cpu-s166223

This modern Hyundai Elantra Lavita car radio is specially designed for your 2001-2010 Hyundai Elantra Lavita. It can be one of you best choices to replace your factory radio. With the help of 3D GPS navigation in high precision, you are able to a number of locations. By simply connecting with your Bluetooth-enabled cell phone, you are able to have hands-free calls and music streaming to keep your journey safe, convenient and relaxing. Wish you like it!

How to replace a 2008 2009 2010 2011 2012 KIA CERATO(MT) car stereo with GPS Bluetooth DVD Touch screen

Posted on by
Seicane S168046 2008-2012 KIA CERATO (MT) car stereo after installation

Look at the picture below, it is a 2008-2012 KIA CERATO(MT) car stereo from Seicane after installation. Don’t you think it looks very great? If you often spend a lot of time on driving, you will easily get bored and tired during a long journey. While at that time, an amazing car stereo can help you eliminate fatigue and relax yourself. If you own a 2008-2012 KIA CERATO(MT) and want to know how to install a high-end car stereo by yourself, you can follow the guide below for installation details.

Seicane S168046 2008-2012 KIA CERATO (MT) car stereo after installation

Seicane S168046 2008-2012 KIA CERATO (MT) car stereo after installation

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4. Please prepare a lever and a screwdriver before the removal and the installation.

5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2008-2012 KIA CERATO (MT) car stereo installation steps

1. The original car radio.

The original car radio

The original car radio

2. Pry the left air conditioner vent with a lever, and then remove it.

Pry the left air conditioner vent with a lever, and then remove it

Pry the left air conditioner vent with a lever, and then remove it

3. Pry the right air conditioner vent with a lever, and then remove it.

Pry the right air conditioner vent with a lever, and then remove it

Pry the right air conditioner vent with a lever, and then remove it

4. Unscrew four screws under the a/c vent holding the original car radio with a screwdriver.

Unscrew four screws under the a/c vent holding the original car radio with a screwdriver

Unscrew four screws under the a/c vent holding the original car radio with a screwdriver

5. Gently take the original car radio out of the dash.

Gently take the original car radio out of the dash

Gently take the original car radio out of the dash

6. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio

Disconnect all connectors at the back of the original car radio

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

That’s all the installation steps on how to install a 2008-2012 KIA CERATO (MT) car stereo. It is not strange if your dashboard is not the same as that pictures show above for different cars in different manufacture years come with different dashboards. But the overall installation principle is the same. If you have any questions, you can ask for your dealer or a professional for help. In addition, it is vital for you to have a suitable car stereo firstly, if you are still searching for it, I’d like to introduce a 2008-2012 KIA CERATO (MT) car stereo from Seicane to you.

http://www.seicane.com/android-radio-gps-navigation-system-for-2008-2012-kia-cerato-mt-with-bluetooth-hd-1024-600-touch-screen-dvd-player-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-usb-sd-mirror-link-s168046

This intelligent car stereo runs faster and has a better performance than ever as it upgraded to the latest Android 5.1.1 operating system and with the configuration of RK3188 1.6 GHz Cortex A9 quad-core processor. You won’t get lost when you travel around a unfamiliar place with the accurate directions and spoken guidance provided by its GPS navigation system. Besides, additional entertainment features will add a lot of joyfulness to your journey. Wish you like it!

Step-by-step instructions for installing a 2004-2010 KIA Sporage car radio with GPS Bluetooth DVD

Posted on by
Seicane 2004-2010 KIA Sporage car radio after installation

Upgrading a high-end 2004-2010 KIA Sporage car radio with both practical functions and entertainment features can not only guarantee your safe and comfortable driving but also provide you with a lot of amusement. It sounds very challenging for car owners to achieve a car radio installation by themselves. But it brings you a sense of achievement once you success, doesn’t it? If you are planning to have this challenging job, you can take the following installation guide as refernce.

Seicane 2004-2010 KIA Sporage car radio after installation

Seicane 2004-2010 KIA Sporage car radio after installation

 

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details:http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2004-2010 KIA Sportage car stereo installation guide

1. Pry around the edges of the trim panel with a lever.

Pry around the edges of the trim panel with a lever

Pry around the edges of the trim panel with a lever

2. Remove the trim panel.

Remove the trim panel

Remove the trim panel

3. Disconnect all the connectors of the trim panel.

Disconnect all the connectors of the trim panel

Disconnect all the connectors of the trim panel

4. Unscrew all the screws holding the original car radio in place with a screwdriver.

Unscrew all the screws holding the original car radio in place with a screwdriver

Unscrew all the screws holding the original car radio in place with a screwdriver

5. Gently take the original car radio out of the dashboard.

Gently take the original car radio out of the dashboard

Gently take the original car radio out of the dashboard

6. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio

Disconnect all connectors at the back of the original car radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11.Put the new Seicane car radio into the dash. 12. Put everything into their original place. All the installation is done.

 

Wish you can get some help from the above instructions. If you find your dashboard is not the same as the above pictures show, you can turn to your dealer or a professional for help. In order to finish the installation perfectly, you need to purchase an ideal car radio for your car first. The following is a fantastic car radio from Seicane I recommend to you.

http://www.seicane.com/aftermarket-android-radio-gps-navigation-system-for-2004-2010-kia-sportage-with-dvd-player-touchscreen-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-bluetooth-usb-sd-steering-wheel-control-quad-mirror-link-s166227

This up-to-date car radio is specially designed for a 2004-2010 KIA Sportage. To make your trip be full of fun, you can turn one the button for playing CD or DVD in a variety of formats so that you can listen to music, watch films and videos in motion. For your convenience and safety, with the help of Bluetooth module, you can have hands-free calls and music streaming without keeping your hands off the steering wheel. Thanks for reading and wish you like it!

An installation guide for a 2013 2014 KIA CERATO Left navigation system radio dvd with Mirror link DVR

Posted on by
2013 2014 KIA CERATO Left navigation system radio dvd after installation

Have you already got a very great car stereo that not only comes with practical functions but also entertainment features? If you think the functions of your car stereo are too limited, you might as well consider to change a better one. Here is an installation guide for a Bluetooth GPS car stereo, taking a 2013 2013 KIA CERATO as an example. If you are interested in it, please read it patiently.

2013 2014 KIA CERATO Left navigation system radio dvd after installation

2013 2014 KIA CERATO Left navigation system radio dvd after installation

 

Please notice before the installation:

1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.

2. A lever and a screwdriver need to be prepared before the installation.

3. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2013 2014 KIA CERATO Left car stereo installation guide

1. Pry the side panel with a lever, and then remove it.

Pry the side panel with a lever, and then remove it

Pry the side panel with a lever, and then remove it

2. Remove four screws with a screwdriver.

Remove four screws with a screwdriver

Remove four screws with a screwdriver

3. Remove the trim panel with your hands. If necessary, you may use a lever to loosen it.

Remove the trim panel with your hands. If necessary, you may use a lever to loosen it

Remove the trim panel with your hands. If necessary, you may use a lever to loosen it

4. Remove four screws holding the factory radio in place with a screwdriver.

Remove four screws holding the factory radio in place with a screwdriver

Remove four screws holding the factory radio in place with a screwdriver

5. Take the factory radio out of the dash with your hands.

Take the factory radio out of the dash with your hands

Take the factory radio out of the dash with your hands

6. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

7. Check all the accessories for the new Seicane car stereo.

8. Connect the harnesses to the back of the new Seicane car stereo.

9. Connect the Seicane car stereo to your original car radio ‘s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place. All the installation is done.

 

Do you have a general idea about how to install a car stereo now? If you still feel it is hard to install such a car stereo by yourself, it suggests you should ask a professional or the dealer for help. What’s more, it is very necessary for you to find a suitable car stereo at first. Do you get your favorite one? If you don’t have one, then I would like to recommend a 2013 2014 KIA CERATO Left navigation system radio dvd from Seicane to you. Click the link below and you will get more information about the product.

http://www.seicane.com/android-aftermarket-radio-navigation-system-for-2013-2014-kia-cerato-left-with-dvd-player-bluetooth-mirror-link-gps-hd-1024-600-touch-screen-obd2-dvr-rearview-camera-1080p-video-tv-usb-sd-3g-wifi-steering-wheel-control-s168051l

This 2013 2014 KIA CERATO Left navigation system radio dvd of high quality comes with the latest android 5.1.1 based system and the powerful 1.6 GHZ Cortex A9 Quad-core CPU, which greatly facilitates the operation. Through the 3D GPS Navigation system, you will have position easily and quickly, and will be guide to the correct destinations by turn-by-turn direction and voice prompts. Besides, some entertainment options are adopted not only to relax yourself but also your families and friends in your car, like playing TV programs, music videos, CDs, music and so on forth. If you like it, then don’t hesitate to take it home. You will get more surprise.

A detailed installation for a 2006-2010 Nissan LIVINA Bluetooth gps dvd stereo with Android5.1.1 Touch Screen OBD2

Posted on by

With the high-speed progress and development of science and technology, car owners’ requests to their car stereos are getting higher and higher. Besides, car owners are very proud of themselves as they can finish the installation of car stereo individually. Please keep reading the article if you are also a car owner of 2006-2010 Nissan LIVINA who is interested in car stereo installation.

2006-2010 Nissan LIVINA Bluetooth gps dvd stereo after installation

2006-2010 Nissan LIVINA Bluetooth gps dvd stereo after installation

 

4 tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2006-2010 Nissan LIVINA car stereo installation guide

1.Use a screwdriver to remove two screws above the Nissan Frontier radio.

Use a screwdriver to remove two screws above the Nissan Frontier radio

Use a screwdriver to remove two screws above the Nissan Frontier radio

2. Remove the trim panel.

Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.

Remove the trim panel

Remove the trim panel

3. Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.

Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel

Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel

4. Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.

Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio

Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio

5. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit

Check all the accessories for the new Seicane head unit

6. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit

Connect the harnesses to the back of the new Seicane head unit

7. Connect the Seicane head unit to your original car radio ‘s plugs.

8. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane head unit into the dash.

10. Put everything into their original place. All the installation is done.

 

That is all the step-by-step installation guide for a 2006-2010 Nissan LIVINA car stereo and wish you get some help from it and achieve your new car stereo installation individually. It doesn’t matter if you cannot do it at the moment. What you can do is to ask your dealer or professionals for help. In any case, the first thing you need to do is to make sure your car stereo is compatible. If It is not suitable, I’d like to recommend a 2006-2010 Nissan LIVINA car stereo from Seicane and wish you like it. Here comes the link.

http://www.seicane.com/android-aftermarket-gps-radio-navigation-system-for-2006-2010-nissan-livina-with-dvd-player-bluetooth-mirror-link-radio-touch-screen-obd2-dvr-tv-3g-wifi-ipod-rearview-camera-1080p-video-usb-sd-s166226

This wonderful car stereo, comes with the latest pure android 5.1.1 base system as well as the configuration of 1.6GHz Cortex A9 quad-core processor, will bring you a smoother and faster operation experience. While the most up-to-date 3D GPS Navigation system will make it easier for you to get to the correct destinations punctually by its features of destination search, turn-by-turn voice prompts, 3D street view, etc. Don’t hesitate to take it home if you like it. Good luck to you!

10 Easy-to-understand steps for the installation of a 2005-2011 Nissan PALADIN Bluetooth gps dvd stereo with 1080P Touch screen OBD2

Posted on by
2005-2011 Nissan PALADIN Bluetooth gps dvd stereo after installation

This passage mainly introduces ten easy-to-understand steps to install a 2005-2011 Nissan PALADIN Bluetooth gps dvd stereo. If you are an owner of a Nissan PALADIN, and you are also planning to replace your obsolete equipment by a brand new car stereo. It suggests you to read this passage and wish you can learn from it.

2005-2011 Nissan PALADIN Bluetooth gps dvd stereo after installation

2005-2011 Nissan PALADIN Bluetooth gps dvd stereo after installation

 

4 tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2005-2011 Nissan PALADIN car stereo installation guide

1.Use a screwdriver to remove two screws above the Nissan Frontier radio.

Use a screwdriver to remove two screws above the Nissan Frontier radio

Use a screwdriver to remove two screws above the Nissan Frontier radio

2. Remove the trim panel.

Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.

Remove the trim panel

Remove the trim panel

3. Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.

Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel

Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel

4. Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.

Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio

Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio

5. Check all the accessories for the new Seicane head unit.

Check all the accessories for the new Seicane head unit

Check all the accessories for the new Seicane head unit

6. Connect the harnesses to the back of the new Seicane head unit.

Connect the harnesses to the back of the new Seicane head unit

Connect the harnesses to the back of the new Seicane head unit

7. Connect the Seicane head unit to your original car radio ‘s plugs.

8. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9.Put the new Seicane head unit into the dash.

10. Put everything into their original place. All the installation is done.

 

 

If you cannot overcome some difficulties by yourself during the installation, you can stop to ask your dealer for help. Or arrange an experienced professional to install it. Before the installation, one thing is particularly important: You have to ensure that you have a compatible car stereo. If you are still searching for one, you can click the following link for a

If you don’t have an applicable one, I’ d like to recommend you to click the following link for a 2005-2011 Nissan PALADIN car stereo from Seicane.

http://www.seicane.com/android-radio-gps-navigation-system-for-2005-2011-nissan-paladin-with-dvd-player-bluetooth-mirror-link-touch-screen-dvr-tv-obd2-3g-wifi-usb-sd-rearview-camer-1080p-video-s166226

You won’t get lost in your driving as this car stereo is equipped with the satellite navigation system, along with features, like turn-by-turn voice, 3D street view and dual zone function, etc. Moreover, as a multimedia device, this stereo can play both CDs and DVDs, which enables you to enjoy music, movies, FM/AM radio, etc. Therefore, you will have a safe and cheerful journey in your car. Thanks for reading. Wish you like it and have a nice day!

A detailed installation guide for a 2008-2012 Honda CITY 1.5L car radio head unit with Wi-Fi Bluetooth GPS Navigation System

Posted on by
Seicane 2008-2012 Honda CITY 1.5L car radio after installation

As everyone knows, the network has become more and more indispensable in people’s daily work routine. Without network, people cannot imagine that how their life will become. So do you want to keep network connection and surf the internet freely in your car. If your answer is “yes”, then a multifunctional car radio will meet your various needs. Here, I’d like to share a detailed installation guide for a 2008-2012 Honda CITY 1.5L car radio for Seicane. You can take is as reference.

Seicane 2008-2012 Honda CITY 1.5L car radio after installation

Seicane 2008-2012 Honda CITY 1.5L car radio after installation

 

 

Here come some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details:http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2008-2012 Honda CITY 1.5L car radio installation guide

1.Remove the air condition with a plastic knife.

Remove the air condition with a plastic knife

Remove the air condition with a plastic knife

2. Then remove the two 10mm bolts under the original car radio.

Then remove the two 10mm bolts under the original car radio

Then remove the two 10mm bolts under the original car radio

3. Pry the top panel of the original car radio with a plastic knife.

Pry the top panel of the original car radio with a plastic knife

Pry the top panel of the original car radio with a plastic knife

4. Then take out the original car radio.

Then take out the original car radio

Then take out the original car radio

5.Socket docking with the original car directly, instead of cutting the original plugs off.

Socket docking with the original car directly, instead of cutting the original plugs off

Socket docking with the original car directly, instead of cutting the original plugs off

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original car radio ‘s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash. 11. Put everything into their original place. All the installation is done.

 

All above is the detailed installation guide for a 2008-2012 Honda CITY 1.5L car radio from Seicane. If you don’t have any ideas about the installation, it suggests you arrange a professional to install it. Moreover, if you are confronted with some problems, you can also turn to your dealer for help. In any event,  the first thing for you is to make sure that you have a suitable car radio for your car. If you are still looking for one car radio, I would like to share a newest 2008-2012 Honda CITY 1.5L car radio from Seicane with you. You are able to click the following link to get more details.

http://www.seicane.com/8-inch-android-gps-radio-navigation-system-for-2008-2012-honda-city-1-5l-with-dvd-player-wifi-bluetooth-mirror-link-hd-1024-600-touch-screen-obd2-dvr-tv-usb-sd-3g-backup-camera-1080p-video-s168059

With a large 8 inch HD 1024*600 multi-touch screen, this 2008-2012 Honda CITY 1.5L car radio GPS Navigation System shows you its strong view impact. Besides, as a multimedia, it supports many different formats, including DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA,which serve you in a surprising way. Wish you like it and have a nice day!